Window Installation Cost Guide: What Wellington Homeowners Pay in 2026

Window Installation Cost Guide: What Wellington Homeowners Pay in 2026

Most Wellington homeowners will pay between $650 and $1,450 per window for a complete installation in 2026, with impact-rated units running $950 to $2,200 once you factor in Palm Beach County permits and CBS wall work. That range is wide because the honest answer depends on three layers: the product you choose, the labor required to set it correctly in a concrete block wall, and the compliance costs Wellington enforces. If you’d rather skip the research and get a line-item quote for your specific openings, call TruePane Windows & Doors at (561) 349-4826 for a free estimate.

Call (561) 349-4826

A $189-per-window quote and a $380-per-window quote can produce the exact same finished job, or they can represent a $4,000 gap in what you’ll owe after the county inspector flags unpermitted work. After 42 years of setting glass in South Florida, we can tell you which of those outcomes is more common. Here’s how the numbers actually break down in Wellington, and what separates a bid that holds up from one that comes apart at the first inspection.

Key Takeaways for Wellington Homeowners

• Full-install cost per window: $650-$1,450 standard, $950-$2,200 impact-rated, including permits and typical CBS labor
• Palm Beach County permit fees add $75-$250+ per project depending on scope, plus a Notice of Commencement that many low bids conveniently omit
• Impact glass costs more upfront but can reduce your homeowner’s insurance premium enough to close the gap within 3-5 years in Florida’s current market
• Low bids routinely leave out stucco repair, haul-away disposal, and re-inspection fees, which surface as change orders after the job starts
• “Installation included” means different things depending on whether the contractor registers both warranty layers and pulls permits before the first day of work

What Wellington Window Installation Actually Costs in 2026

Let’s get specific about the numbers you’ll see on a legitimate line-item bid in Wellington this year.

A standard single-hung or fixed replacement window, no impact rating, runs roughly $350 to $650 for a mid-grade vinyl or aluminum unit from a manufacturer like Jeld-Wen or Milgard. Labor to remove the old unit, prep the opening, set the new one, and finish the interior and exterior typically adds $200 to $450 depending on whether the home is wood-frame or CBS concrete block. Wellington is overwhelmingly CBS construction, which means more time on the saw and more care with the fasteners, and that shows up in labor.

Impact-rated units from PGT, CGI, or ES Windows start around $600 for the glass package alone and climb to $1,200 or more for larger openings, specialty shapes, or higher design pressure ratings. Add labor and you’re at $950 to $2,200 per opening, installed.

Permit fees for a typical whole-house window replacement in Wellington range from $75 to $250+ depending on the number of openings and whether the county requires engineered drawings. A Notice of Commencement, required by Florida law for any job over $2,500, adds a recording fee and a certified copy fee most homeowners never see until the low bidder sends a change order. We include every one of these line items in the estimate up front, so the number you approve is the number you pay.

Where the Costs Hide: What Cheap Bids Leave Out

We pulled a quote from a home in the Equestrian Club area last spring where a homeowner had received three bids for a 12-window replacement. The lowest bid came in just under $4,800. The highest came in at $9,200. On paper, the same job. In practice, the low bid assumed the existing window frames were square and plumb, didn’t include stucco repair around the new frames, charged separately for disposal of the old glass, and didn’t mention the permit at all. When the county inspector showed up for the final review, the job failed on anchoring and the homeowner paid a re-inspection fee plus the cost of bringing the install up to code.

The three cost layers, product, labor, and compliance, interact. A cheap unit set poorly in a Wellington CBS wall will leak air and water, and the cost to correct it later always exceeds what the honest bidder charged the first time.

Impact Glass in Wellington: The Insurance Math Changes the Real Cost

Florida’s property insurance market has been punishing homeowners for a decade now, and Wellington is not exempt. What we’re seeing in 2026 is that carriers are pricing wind mitigation credits more aggressively than ever. An impact-rated window package, properly permitted and documented, can reduce the wind mitigation portion of your premium by anywhere from 15% to 40% depending on your carrier, your home’s age, and whether you already have other mitigation features like a reinforced roof deck or secondary water resistance.

Let’s do the math on a typical Wellington home with a $6,000 annual premium. A 20% credit saves $1,200 per year. If the 12-window impact package costs $6,000 more than standard glass, the premium savings alone recoups that difference in five years, before you account for the storm protection, the lower risk of water intrusion, and the fact that you’re not boarding up windows at 6:00 a.m. before a hurricane watch.

We’ve had Wellington homeowners ask us whether paying for impact-rated glass is a smart investment or a sales pitch. The answer in this market is increasingly mathematical. Call your agent before you sign a contract and ask what an impact window package would do to your wind mitigation credits. Then call us with that number and we’ll show you the cost difference between standard and impact-rated lines side by side, on paper, so you can see which way the five-year math breaks for your house.

How to Read a Window Installation Bid in Palm Beach County

Two bids can list the same window brand and still be $3,000 apart. Here’s what to look for when you’re comparing proposals in Wellington side by side.

First, look at the unit cost, not the total. A bid that says “12 windows, $7,800” tells you nothing about whether you’re getting PGT or a builder-grade import. A proper bid breaks out each unit with the manufacturer line, the model, the size, and the glass package. If a bidder won’t do that, that’s the end of the conversation.

Second, look at what the labor line actually covers. Does it say “installation only” or does it specify removal of the old unit, preparation of the opening, setting and leveling, interior and exterior trim, stucco patch, and cleanup? In Wellington’s CBS homes, the difference between “installation” and “installation with stucco repair and finish work” is real money and real time.

Third, look for the compliance line. Is there a permit fee listed? A Notice of Commencement? Who pulls the permit, you or the contractor? If the words “permit” and “Notice of Commencement” don’t appear anywhere on the document, they’re not included, and they’re not optional in Palm Beach County.

Fourth, look at warranty language. A manufacturer’s warranty covers the product. A workmanship warranty covers the install. In Florida, the manufacturer can and will deny a warranty claim if the installation wasn’t performed to their published specifications. That’s the exact reason we register both warranty layers in writing, with durations stated, before the truck leaves the driveway. It’s the difference between a warranty that pays and a warranty that gets denied on a technicality.

What ‘Installation Included’ Actually Means in Wellington Contractor Language

Here’s a phrase we hear from homeowners all over Wellington, in the Hunt Club, in Olympia, in the older sections off South Shore Boulevard: “The other guy said installation was included.”

In our experience, “installation included” means one of three things. Best case, it means the contractor is pricing the full job, every step, every permit, every finish detail, into one number. That’s a square deal and it’s how we bid every job.

Second case, it means the contractor has absorbed the labor into the unit price to make the number look simple, and the workmanship is only covered by whatever the contractor chooses to honor. No written warranty, no registration, no leverage for you if the install fails.

Third case, and the most common one we clean up after, it means the contractor intends to do the minimum on the day of install and deal with problems later if and only if you call enough times. The stucco around the frame gets a rough patch, the window doesn’t quite close right, and in July the door starts to bind. That’s not installation. That’s delivering glass to your house.

The contract language that closes this gap is specific: “Contractor to remove existing units, prepare openings per manufacturer specifications, install new units plumb, square, and level, finish interior and exterior trim, patch stucco to match existing, haul away all debris, pull permits, file Notice of Commencement, schedule and pass all inspections, and register all manufacturer warranties in homeowner’s name.” If the contract doesn’t say that, it doesn’t mean that.

When the Job Is Bigger Than a Straight Replacement

Sometimes a window project in Wellington turns into a door project, or requires reframing a wall, or reveals water damage that needs remediation before the new unit goes in. That’s the moment to call a pro rather than push forward. If you see water staining around the interior casing, soft drywall below the sill, or a header that’s sagged, stop and have someone who knows what they’re looking at evaluate the opening before you order glass. Setting a new window into a compromised opening is a waste of a good unit and a good morning.

Related services in Wellington: if your project includes a new entry door or a sliding patio door, see our Door Installation in Wellington page. If you’re replacing windows rather than starting from a rough opening, our Window Replacement in Wellington page covers that process in detail. And if you’re ready to see numbers, start with our Window Installation in Wellington service page for how we structure a bid.

The Bottom Line

Window installation cost in Wellington in 2026 comes down to three layers: the product, the labor, and the compliance. Cheap bids collapse the first two and ignore the third, and the homeowner ends up paying the difference after the inspector leaves or the first summer storm comes through. A real bid lists every unit, every labor step, every permit fee, and every warranty in writing. If you’re in Wellington and want a line-item quote from a company that’s been serving this community for over 42 years, TruePane Windows & Doors offers free estimates. Call (561) 349-4826 and a live person will answer, day or night. We’ll measure every opening twice, quote the manufacturer lines side by side on paper, and register both warranty layers before the truck leaves your driveway.

Frequently Asked Questions