Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTrusted Window Installation for Wellington Homeowners
Window installation in Wellington, FL typically costs $450 to $1,850 per window including labor and materials, and a full-home project of 10 to 15 windows usually runs $7,500 to $22,000 depending on the line you choose and how the existing openings are framed. Most installations are completed in one to two days once the units arrive, and that schedule holds whether you are replacing fogged-out bedroom windows in Olympia or upgrading to impact-rated glass in the Equestrian Club. Dale Kessler founded TruePane Windows & Doors in 2008 on a rule he keeps on the whiteboard to this day: if the pane is not true, the job is not done. We have served Wellington and the surrounding communities since 2008, and a live person answers our phone 24 hours a day at (561) 349-4826.
What Our Window Installation Service Includes
Casement Windows
Casement Windows crank outward on side hinges and seal tight against the frame when closed, which makes them one of the strongest performers against Wellington’s afternoon thunderstorms and wind-driven rain. Homeowners in the older sections of the village, where original crank hardware has worn past the point of smooth operation, often choose casements when they want better ventilation without the rattle. TruePane measures every casement opening twice, shims the frame level in both planes, and sets the sash so the weatherstripping meets evenly all the way around before we call the install complete.
Awning Windows
Awning Windows hinge at the top and open outward from the bottom, which lets you leave them cracked for air even during a passing Florida downpour. They work well over kitchen sinks, in bathrooms, and anywhere you want ventilation without a wide interior swing radius. We install awning units with stainless hardware and factory-matched screens, and we bed the frame in sealant that will not chalk out in the Wellington sun in five years.
Fixed & Picture Windows
Fixed & Picture Windows bring the big view while offering the tightest seal of any window type, because there are no operating parts to sag or leak. In Wellington, where a lot of homes look out on water or preserve, a large picture unit is often the centerpiece of a wall. TruePane orders fixed units sized to within an eighth of an inch from our measurements, sets them with structural shims, and insulates the full perimeter before trim goes on.
Single & Double Hung
Single hung and double hung windows are the traditional vertical-sash design, and Wellington has thousands of them, many in homes built twenty or thirty years ago whose original balances have failed. A properly installed hung window glides with two fingers and stays put at any height, without being propped with a paint stirrer. We replace or install hung windows with factory-matched balances, weatherstripping, and tilt-in sash for cleaning, and we set them plumb so they will not bind or creep.
Sliding Windows
Sliding windows move horizontally on a track and fit naturally across wide openings in sunrooms, patios, and bedrooms. The most common problem we see in Wellington sliding windows is tracks packed with sandy soil that has worn the rollers down to the metal. We install sliders with new track systems, stainless rollers, and interlocking meeting rails that seal center-to-center as cleanly as the ends.
Bay & Bow Windows
Bay & Bow Windows project outward from the wall to create a seating nook or a bigger feel in a living room, and they demand the most careful install work of any residential window type. The roof and floor supports have to carry real weight, and every joint has to be flashed so water never finds a path behind the framing. TruePane builds bay and bow assemblies off-site to our opening dimensions, sets the unit on a built-up sill with positive drainage, and ties the roof cap into the wall with step flashing, not just a bead of caulk.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Window Installation
We are an authorized installer for Andersen wood, composite, and impact lines, and our technicians have set hundreds of units in Wellington homes, from A-Series casements to 400 Series picture windows. We register every Andersen warranty layer in writing before the truck leaves your driveway, so you never have to chase down a serial number later.
We carry and install Pella and Marvin as well. On Pella jobs we are particular about the factory hardware spec, because we have seen knockoff rollers and hinges ruin a good window in two seasons of Wellington humidity. On Marvin projects, whether it is an Elevate double hung or a Signature casement, we work directly with the architectural rep to confirm sizes, mulling, and glass packages before the order is placed. Whether you have Andersen, Pella, or any other make, we can install it, register it, and stand behind it.
Signs You Need Window Installation Right Now
- Condensation between the panes. A fogged seal does not get better. The insulating gas has leaked out and moisture has moved in, which means the window is now doing the opposite of its job. In Wellington’s humidity, a failed seal also becomes a place for mildew to grow inside the glass package where you cannot wipe it.
- A frame you can feel breathing. Stand next to a closed window on a windy day. If you feel air moving, the weatherstripping or the frame joinery has given out. That is conditioned air leaving your house and wild air coming in, and your electric bill shows it every month.
- Windows that stick, bind, or fall shut. A sash that catches in the jamb or drops when you let go is telling you the balances or hinges have failed. Forcing it open over time bends the hardware and starts racking the frame, which turns a repair into a replacement.
- Termite damage or soft wood in the frame. Wellington’s sandy soil and warm, wet summers are hard on wood window frames. If a screw from a window lock no longer bites, or a corner of the sill gives under pressure, the structural wood is compromised and the opening is no longer holding the unit square.
- You are painting your windows every two years. Frames that will not hold paint, or sashes that have been caulked so many times the joint looks like a scar, have reached the end of their service life. New installation replaces the whole assembly with materials that do not need that kind of annual rescue.
Our Window Installation Process - Step by Step
- 1
Call and talk to a live person. You call (561) 349-4826, day or night, and a person in our Wellington office answers. We note the address, the number of windows, and the issues you are seeing, and we schedule a measure-and-quote visit that works for you.
- 2
On-site measure and line-by-line quote. A background-checked, uniformed technician comes to your home and measures every opening twice, in both diagonals. We quote manufacturer lines side by side on paper, so you see exactly what an Andersen costs next to a Pella or a Marvin, with frame material, glass package, and labor separated line by line.
- 3
Order and warranty registration. Once you approve the numbers, we place the order with the manufacturer. Before installation day, we register both warranty layers in writing, in your name, with the durations stated, and we hand you that paperwork. The Keystone Standard means no warranty gets left unregistered and no fine print gets discovered later.
- 4
Removal and installation. Our team arrives on time, protects the floors and furniture, and removes the old units without tearing up the drywall around the opening. We set each new window with structural shims, fasten it to spec for impact or non-impact rating, insulate the full perimeter, flash the exterior, and trim it clean.
- 5
Cleanup, walkthrough, and the Done Right Promise. We haul the old windows, vacuum the work area, and walk the job with you before we leave. If anything is not done right, you call us and we make it right. No paperwork fight, no arguing. That is the whole promise.
How Much Does Window Installation Cost in Wellington?
A typical casement or awning window install in Wellington runs $600 to $1,400 per opening including a mid-range vinyl or aluminum unit and labor. Single and double hung windows generally fall between $450 and $1,100 per opening, while a large fixed or picture window can run $800 to $2,200 depending on the glass package. Bay and bow windows are the high end of the scale, commonly $3,500 to $8,500 for the full assembly set and trimmed. Impact-rated glass, required in many newer Wellington communities and wanted by just about every homeowner near the preserve, adds roughly 45 to 75 percent to the unit cost over non-impact.
What moves the price: the frame material, the glass package, the size of the opening, whether the existing frame is square enough to reuse, and whether the window is on a second story or a difficult access wall. What should not move the price is the installer’s mood on install day. TruePane quotes fixed numbers up front, no surprise line items. Your free estimate includes the measure, the line-by-line quote, and the warranty registration paperwork. Call (561) 349-4826 and we will give you real numbers for your house, not a range off a website.
Window Installation Near Wellington - Our Service Area
TruePane installs windows throughout the western communities, from Window Installation in Loxahatchee Groves to Royal Palm Beach, Greenacres, Westlake, and the neighborhoods across the Wellington line. We also serve Window Installation in Belle Glade and the Lake Worth Beach and Lantana corridors. Most measure visits happen within a few business days, and installation scheduling works around the manufacturer lead time on your chosen line. If you are in Palm Springs, Atlantis, Westgate, or anywhere nearby, call us and we will put you on the schedule.
Serving Wellington, FL - Our Local Coverage Area
We’re based in the Wellington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Window Installation in Wellington
Window installation is the removal of an old window unit and the setting of a new one into the existing opening, with the frame shimmed, fastened, insulated, flashed, and trimmed. In Wellington, the term covers both replacement installs into existing frames and full-frame tear-outs where the old frame comes out to the rough opening. TruePane handles both, and we quote the difference on paper so you know what you are paying for.
Most single-window installs are done in a day, and a full home of ten to fifteen windows usually takes two working days on site. Manufacturer lead times are separate, typically two to six weeks from order to arrival at our shop. We give you a written schedule before we start, and we honor it.
As noted above, plan on roughly $450 to $1,850 per window for most types, with bay and bow assemblies running higher. The exact number depends on the opening size, the brand, the glass package, and whether impact rating applies. Call (561) 349-4826 for a free line-by-line quote, and remember we register both warranty layers in writing before the job is done.
Yes. We are an authorized Andersen installer and our technicians have installed and serviced hundreds of Andersen units across Wellington, from Equestrian Club estates to the neighborhoods north of Forest Hill Boulevard. We quote Andersen lines side by side with Pella and Marvin on paper, and we register the full Andersen warranty in your name before we leave the driveway.
Yes. A live person answers our phone 24 hours a day, seven days a week, not a voicemail tree and not a regional call center in another state. If a window is boarded or a tree has come through a pane, we can get a crew out, secure the opening, measure for a permanent replacement, and schedule the install as fast as the manufacturer can get the unit to us.
Every TruePane install is covered by the Done Right Promise on our workmanship, plus the manufacturer’s warranty on the unit itself, with both layers registered in writing before our truck leaves your property. We do not leave warranty registration to you, and we do not make you read fine print after something fails. If it is not done right, we make it right.
Move furniture and wall hangings at least four feet back from any window being replaced, clear the outside perimeter so our team can get ladders and materials in, and let us know which windows you need redone first. Our crew covers floors, runs dust control where needed, and hauls all old units and debris when the job is done. You do not need to remove blinds or trim; we handle that as part of the install.
Schedule Your Window Installation Service in Wellington Today
Call (561) 349-4826 for a free measure and a line-by-line quote on any window install in Wellington. You will talk to a live person, get a written price, and have both warranty layers registered before we leave. Dale Kessler and the TruePane team have been keeping Wellington windows true since 2008, and if the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Wellington since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.