Shingle, Tile & Metal Roofing in Wellington - Free Roof Inspection, Written Price

Trusted Shingle, Tile & Metal Roofing for Wellington Homeowners

If your roof is losing shingles after the afternoon thunderstorms that roll through Wellington, or the tile underlayment is showing its age after twenty Florida summers, you’re likely weighing repair against replacement and wondering who will actually stand behind the work. Roofing in Wellington means dealing with heat, humidity, wind-driven rain, and the occasional hurricane warning that sends every homeowner outside squinting at their ridge line. We answer the phone when you call, we show up when we say we will, and we put the warranty in writing before the truck leaves your driveway. For shingle, tile, and metal roofing in Wellington, call (561) 349-4826 for a free estimate.

Call (561) 349-4826

Dale Kessler founded TruePane Windows & Doors on a simple rule: if the pane is not true, the job is not done. That same standard applies to every roof we touch in Wellington. We’re not a franchise operation running crews through a playbook. We’ve served local communities since 2008, and we plan to be here for the next thirty. When you call about a roof, a live person answers. Not a voicemail tree, not a callback form. A person.

Key Takeaways

• Shingle, tile, and metal roofing in Wellington typically costs between $8,500 and $32,000 depending on material and square footage.
• Most roof replacements in Wellington are completed in 2 to 5 days, with underlayment and flashing replaced as part of the job.
• We provide written, line-item quotes with no change orders sprung on you mid-job.
• Every roofing job is backed by the Done Right Promise and The Keystone Standard.
• Call (561) 349-4826 and a live person answers, 24 hours a day, 7 days a week.

What Our Shingle, Tile & Metal Roofing Service Includes

Shingle Roofing

Asphalt shingle roofs remain the most common roof type in Wellington because they balance upfront cost with dependable performance in Florida’s climate. When we install or repair a shingle roof, we strip the old material down to the deck, inspect the sheathing for rot or water damage, and replace any compromised boards before laying a high-grade synthetic underlayment. The underlayment matters in Wellington, where a summer storm can dump an inch of rain in twenty minutes. We nail every shingle to the manufacturer’s pattern, not to a hurried crew’s convenience, and we check the fastening pattern before the cap layer goes on.

Shingle roofs in Wellington need attention when you see granule loss in your gutters, curling at the edges, or any shingle that lifted after a storm. Ignoring those signs shortens the roof’s life and lets water into the places you can’t see. We repair individual slopes when the damage is isolated and replace the full roof when the underlying felt or the sheathing has been compromised. Either way, you get a written quote before work begins, not after.

Tile Roofing

Tile roofs are common across Wellington’s newer subdivisions, and they demand a different set of skills than shingle work. Concrete and clay tile weigh anywhere from 600 to 1,100 pounds per square, which means the roof structure underneath has to be sound before that kind of load goes back on. We inspect the battens, the underlayment, and the attachment points every time, because a cracked tile is usually the symptom, not the disease. In Wellington heat, the underlayment beneath tile breaks down long before the tile itself, and reusing old underlayment under new tile is how you get a roof that fails from the inside out.

We also walk tile roofs the way a glazier measures glass: carefully, and with respect for the material. Broken tile replacement requires matching the profile and color, and we source from the same manufacturers who supplied the original roof whenever possible. When a full tile roof replacement is the right call, we specify the underlayment system, the fastening pattern, and the tile profile in writing. No vague estimates, no surprises on the final bill.

Metal Roofing

Metal roofing in Wellington has moved from agricultural buildings to residential homes for good reason: a standing seam metal roof sheds water faster than any other system and holds up to hurricane-force wind when installed correctly. The key word is correctly. We see plenty of metal roofs in Wellington with fastener patterns that don’t meet Florida’s wind codes, and those roofs fail at the exact moment you need them to hold. We fasten every panel to the manufacturer’s specification and install the clips, seams, and flashing so water never gets a chance.

Metal roof repair in Wellington often involves replacing damaged panels, resealing seams, or correcting flashing that was never done right the first time. A metal roof can last 40 to 60 years when the install is square, but a bad detail at the eave or the ridge cuts that lifespan in half. We stand behind our work with the Done Right Promise, and the warranty layers get registered in writing before we leave.

With every material, shingle, tile, or metal, we pull our own measurements, quote the job line by line, and never hand you a price that changes once the work begins. That’s a square deal, and it’s the only way we do business in Wellington.

Brands We Service for Shingle, Tile & Metal Roofing

We work with the roofing material brandsWellington homeowners already have on their houses, and we know which manufacturer lines hold up in South Florida’s climate. On the metal side, we regularly install and repair PGT panels, which are engineered for high-wind coastal zones and carry the testing documentation to prove it. We understand PGT’s fastening requirements and don’t improvise with off-brand clips or screws. The panel and the fastening system are tested as one assembly, and that’s how we install it.

For shingle and tile systems, we work with Therma-Tru underlayment products skylight flashings where rooflines meet daylit spaces. Therma-Tru’s synthetic underlayments hold up to the heat and humidity that eats cheaper felt in under a decade. ViewLux flashings integrate cleanly with shingle and metal roof planes, which matters when a skylight is part of the roof system. Whether your roof carries PGT metal, Therma-Tru underlayment, ViewLux flashings, or any other manufacturer’s material, we service it. We don’t push a brand you don’t have. We work with what’s on your roof and quote side by side on paper when a change makes sense.

Signs You Need Shingle, Tile & Metal Roofing Right Now

• Shingles in the yard or driveway after a storm. If you find shingle pieces on the ground after a Wellington afternoon storm, the seal strip has failed and the roof is losing its first defense against wind-driven rain. Every missing shingle exposes the underlayment, and once that layer is compromised, water moves through fast.
• Broken or sliding tiles over the living space. A cracked concrete tile may not leak today, but it shifts water onto the underlayment and creates a path that widens with each rain. Sliding tile means the fastening has failed, and that’s a structural issue, not a cosmetic one.
• Rust stains or missing screws on a metal roof. Rust at the screws or panel seams means the protective coating has been breached and the roof is corroding from the fastener out. Loose or missing screws let panels lift in wind, and once a metal panel catches air, the damage multiplies.
• Water stains on ceilings or walls after rain. A roof leak in Wellington rarely shows up during the storm. It shows up a day or two later, as the water works through the deck and drywall. By the time you see the stain, the leak has been active for a while, and it will not fix itself.
• Daylight visible through the roof boards from the attic. If you can see light coming through the decking in your attic, the roof has holes, and those holes are admitting water every time it rains. This is the clearest sign that repair is no longer optional.

None of these signals should be ignored through another Wellington rainy season. A small problem now is a five-figure problem later, and a roof that fails during a hurricane warning isn’t something you want to discover at midnight.

Our Shingle, Tile & Metal Roofing Process - Step by Step

1. 1
   Free written estimate and roof assessment. We come to your Wellington home, measure every plane, and document what’s present: the current material, the underlayment condition, the flashing details, the roof deck, and any signs of prior patchwork. You get a line-by-line written quote that shows exactly what we’ll do and what it will cost. No charge for the estimate, no obligation attached to the number.
2. 2
   Material selection and warranty registration. If you decide to move forward, we quote the specific materials side by side on paper, so you see the difference between one shingle line and another, not just the difference in price. Before any work begins, we register both warranty layers with the manufacturer, in writing, with the durations stated. That’s The Keystone Standard, and it’s non-negotiable.
3. 3
   Full tear-off or targeted removal. For replacements, we remove the old material down to the deck and inspect every square foot of sheathing. Any compromised wood gets replaced before the new underlayment goes down. For repairs, we remove only the affected area and protect the surrounding roof while we work.
4. 4
   Underlayment, flashing, and material installation. We install the underlayment system specified in your quote, then the shingles, tile, or metal panels according to the manufacturer’s fastening schedule. Every flashing detail at the chimney, the skylights, the valleys, and the eaves is redone, not reused. In Wellington, the flashing is where roofs leak first, so we treat it as the most critical part of the job.
5. 5
   Final inspection and walkthrough. We walk the roof and the property with you, point out what was done, and show you the registered warranty documentation. Any debris is removed from the site. If you look at the roofline and something doesn’t look true, we fix it. That’s the Done Right Promise, and it’s in effect on every roofing job we do in Wellington.

How Much Does Shingle, Tile & Metal Roofing Cost in Wellington?

Shingle, Tile & Metal Roofing Near Wellington - Our Service Area

We provide shingle, tile, and metal roofing services throughout Wellington and the surrounding communities, including Shingle, Tile & Metal Roofing in Belle Glade, Shingle, Tile & Metal Roofing in Loxahatchee Groves, Royal Palm Beach, Westlake, Palm Springs, Greenacres, Atlantis, Westgate, West Palm Beach, Lake Worth Beach, and Lantana. Most roof inspections in Wellington are scheduled within one to two business days, and emergency leak calls get priority. If you’re calling from anywhere in the Wellington area, a live person answers, and we’ll be there when we say.

If you’re also considering new windows or doors alongside your roof work, we handle home window and door installations across the same service area, and we can coordinate the schedules so the roofline and the openings are handled together.

Frequently Asked Questions - Shingle, Tile & Metal Roofing in Wellington

Schedule Your Shingle, Tile & Metal Roofing Service in Wellington Today

If your roof needs attention, don’t wait for the next storm to make the decision for you. Call us at (561) 349-4826 for a free, no-obligation estimate on shingle, tile, or metal roofing in Wellington. A live person answers, we measure twice, and we put the quote in writing. Dale Kessler’s rule hasn’t changed since the first day: if the pane is not true, the job is not done. The same holds for every roof we touch.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Wellington since 2008.