Impact Garage Doors

Impact Garage Doors in Wellington, FL | TruePane Windows & Doors

Impact garage doors close out the largest single opening in most Florida homes: the garage. If your house in Wellington already carries impact windows and doors, a standard garage door is the weak point that undoes the rest of the envelope. One failed panel under wind load, and the pressure inside the garage can lift the roof. TruePane Windows & Doors installs factory-trained, hurricane-code-approved impact garage doors throughout Wellington and western Palm Beach County. We match the design pressure to your specific wind zone, handle the product approval paperwork your permit requires, and set the door level, plumb, and square. Call (561) 349-4826 to schedule your free on-site measurement.

Call (561) 349-4826

Product Overview - Impact Garage Doors

The Impact Garage Door series is built to close your garage opening to the same wind-zone standard as the rest of your impact package. In Wellington, that standard is not optional. The Florida Building Code classifies much of Palm Beach County as a High-Velocity Hurricane Zone, and garage doors are treated as part of the structural envelope, not as accessories. This system is engineered for that reality.

The core panel construction uses insulated steel. That gives you two things at once: the structural stiffness needed to hold a large flat span under cyclic wind loading, and a thermal break that keeps the garage from becoming an oven in July and August. Optional glass panel inserts let you bring daylight into the garage without giving up the impact rating. The door runs on a reinforced track assembly sized for the panel weight and the wind load, not for a light residential door.

Architecturally, the Impact Series fits what we already see across Wellington. The clean panel lines sit naturally on Mediterranean and modern coastal elevations. The tongue-and-groove panel profile keeps sightlines tight and consistent. For homes in communities that require uniform garage door appearance, the finish options and panel profile coordinate well with existing doors on the street. TruePane Windows & Doors handles the full install: old door removal, track replacement, header inspection, and final adjustment.

Technical Specifications

• Panel construction: Insulated steel panel, non-glazed standard; optional glass panel inserts available
• Glass options: Insulated Steel Panel (Non-Glazed) or Optional Glass Panel Inserts
• Design pressure: Matched to your wind zone, up to +/‑100, never higher
• Finish options: White, Almond, Sandtone, Black
• Compliance documentation: Miami-Dade NOA (Notice of Acceptance) and Florida Product Approval numbers issued per configuration, verified on your specific quote
• Code basis: Engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements
• Testing protocol family: TAS 201 large-missile impact, TAS 202 cyclic wind-pressure loading, TAS 203 forced-entry resistance
• Energy glass option: Low-E and insulated glass available for energy performance
• Installation practice: AAMA 2400/2410 standard practice; AAMA 812 low-expansion foam perimeter sealant

Hurricane & Compliance Performance

Laminated Impact Glass. When glass is specified, it uses a PVB (polyvinyl butyral) interlayer bonded between glass lites. The interlayer holds the glass in the frame under impact, so the panel keeps its integrity instead of shattering inward and letting wind pressurize the garage.

Miami-Dade NOA / Florida Product Approval. Each configuration carries its own Notice of Acceptance or Florida Product Approval number. The number applies to the specific size, glass type, and design pressure combination you order. We verify the exact number on your quote before you sign anything.

FBC / HVHZ Compliance. The system is engineered to Florida Building Code High-Velocity Hurricane Zone requirements. That is the same standard your impact windows and exterior doors must meet in Wellington, and your garage door should not be the exception.

TAS 201 / TAS 202 / TAS 203 Testing Context. These are the test standards HVHZ-rated products are evaluated under. TAS 201 covers large-missile impact, TAS 202 covers cyclic wind-pressure loading, and TAS 203 covers forced-entry resistance. Together they simulate what a real storm does to an opening: hit it, then push and pull on it for hours.

Design Pressure for Your Wind Zone. We never sell a higher design pressure than your zone requires, and we never sell less. The rating is matched to your specific wind zone in Wellington, up to +/‑100. If your plan calls for +/‑70, that is exactly what we quote.

Energy Performance. The insulated steel core helps keep heat from radiating through the largest unshaded wall of many garages. Low-E and insulated glass options add similar performance to any glazed panels. It will not turn the garage into living space, but it does take the edge off the afternoon heat.

Color & Glass Options

The Impact Garage Doors come in four finishes: White, Almond, Sandtone, and Black. White and Almond work well on the light stucco elevations common across Wellington’s older sections and many newer communities alike. Sandtone sits nicely against warm beige and travertine tones, which is a finish we see often on Mediterranean elevations near the Wellington Green area. Black is a strong contrast choice that reads as contemporary and frames the garage opening more deliberately; it works best on homes with dark trim, black window frames, or modern farmhouse styling.

For glass, the standard insulated steel panel is the non-glazed workhorse. It maximizes structural surface area and gives you the most consistent finish. The optional glass panel inserts bring in natural light across the top section of the door, which matters in garages used as workshops, gyms, or anything beyond car storage. If you choose glass inserts, Low-E and insulated glass options keep the solar gain reasonable. We can mock up both looks against your home’s elevation at the free measurement visit.

Installation by TruePane Windows & Doors in Wellington

A hurricane-rated garage door is only as good as the install. The NOA or Florida Product Approval applies to the product as installed, which means the installer’s work is part of the rating. We take that literally. Every installation starts with a pre-install inspection of the opening, the header, the jambs, and the existing track mounting points. If the header is undersized or the jambs are not square, we address that before the new door goes in.

We set the door level, plumb, and square, which is not a throwaway line. An out-of-square garage door binds on the track, wears rollers unevenly, and can leave gaps that compromise the air and water seal at the jambs. TruePane Windows & Doors installs per AAMA 2400/2410 standard practice. We use AAMA 812 low-expansion foam around the perimeter to create a complete air and water seal between the frame and the rough opening. After the door is hung and adjusted, we run a final water test and make sure the door operates smoothly through a full cycle with the opener.

Wellington sits in an HVHZ jurisdiction, and the permit submittal will ask for the product approval documentation. We handle that as part of the project. We pull the permit where required, submit the NOA or Florida Product Approval number for your specific configuration, and schedule the inspection. If the building official has questions, we are the ones who answer them. Improper install compromises the NOA-rated system, and no door on the market compensates for that. The install is the product.

Frequently Asked Questions - Impact Garage Doors

Get a Quote - Impact Garage Doors in Wellington

We measure, confirm your wind zone, select the right design pressure, and give you a written line-item quote before any work begins. TruePane Windows & Doors is factory-trained on this product and installs throughout Wellington. Call (561) 349-4826 to schedule your free on-site measurement and project start conversation.

Written by the team at TruePane Windows & Doors, serving Wellington, FL and western Palm Beach County.