Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTrusted Custom & Geometric Windows for Wellington Homeowners
Custom and geometric windows in Wellington typically cost $1,800 to $6,500 per opening installed, depending on the shape, glass package, and whether impact rating is required for your specific location within the village. Most shaped windows - arches, circles, trapezoids, pentagons - are ordered to exact specifications and take two to four weeks from template to installation. TruePane Windows & Doors has been setting custom openings across Wellington since before the equestrian neighborhoods pushed west of 441, and we still treat every radius and mullion joint the way Dale Kessler taught from day one: if the pane is not true, the job is not done.
We answer the phone at (561) 349-4826 - a live person, any hour, any day. Custom work is not the place for a callback form, and you should not have to leave a message to ask about a $4,000 window that has to fit an opening that was framed forty years ago.
Key Takeaways
- Custom-shaped windows run $1,800-$6,500 per opening installed in the Wellington market, with impact-rated geometric glass at the higher end.
- Both manufacturer warranty layers get registered in writing before our truck leaves your driveway - that is The Keystone Standard, and it is non-negotiable.
- Every job carries the Done Right Promise. If it is not done right, we make it right. No paperwork fights, no arguing.
- A live person answers our phone 24/7. You call, you get a human being in Wellington, not a call center.
What Our Custom & Geometric Windows Service Includes
Most window companies in Wellington will happily sell you a stock double-hung and call it a day. A custom opening - a half-round transom over a pair of French doors, an octagon accent in a gable, a trapezoid that follows a vaulted ceiling line - changes everything. The template has to be exact, the frame has to carry the load, and the glass has to meet Florida code without fogging in the humid season. Here is what we actually do under the custom and geometric umbrella.
Custom Impact Windows
A custom impact window is a shaped window engineered to meet Miami-Dade or Florida Building Code impact standards - the same missile-test standards a stock impact window meets, but applied to a non-rectangular opening. You need this when the opening is not a standard size or shape and sits in a windborne debris zone, which covers most of Wellington depending on your distance from the coast and exposure category. TruePane specifies the laminated glass and reinforces the frame per the manufacturer’s engineering, then registers both warranty layers in writing under The Keystone Standard before we leave the job.
Geometric & Shaped Windows
A geometric window is any fixed, non-operable window that is not a rectangle: circles, half-rounds, quarter-rounds, hexagons, octagons, trapezoids, parallelograms, and true triangles. Wellington homes built in the 80s and 90s - Grand Isles, Sugar Pond Manor, much of the Aero Club corridor - used these as accent glass over entries and in gable ends, and those originals are now thirty to forty years old with failed seals and aluminum frames that sweat in July. We template every opening twice - digital and physical - because a geometric window that is off by an eighth of an inch will not set square, and you will see it every time you pull into your own driveway.
Arched & Curved Windows
Arched windows are the ones with a curved top, usually a fixed transom or a full-height unit with a radius head, and curved windows are the rare breed that bend the glass itself along a radius - eyebrow windows, curved bay corners, and similar. Arched units are common in Wellington’s higher-end custom builds, particularly in Palm Beach Point and the Equestrian Club area, where builders used radius-top mulls to echo the barrel-vaulted entries. Curved glass is a different animal entirely: it requires a custom radius template, and the sash, frame, and glazing bead all have to be matched to that specific curve. We order from manufacturers who bend glass in-house, not third-party vendors, so the warranty chain stays clean.
Oversized Openings
An oversized opening is any window rough opening that exceeds what stock frame and glass packages are rated to support - commonly anything over 40 square feet of glass area, or a mulled assembly that spans eight feet or more. These show up in Wellington’s lakefront builds and the larger estate homes off South Shore Boulevard, where walls of glass are expected to handle wind load, solar gain, and the occasional hurricane. We engineer the mullion reinforcement, specify laminated glass where code or common sense dictates, and pull permits when the structural opening changes. A big window that flexes in a storm is not a window problem; it is a wall problem.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Custom & Geometric Windows
We are an authorized installer for more than a dozen manufacturer lines - Andersen, Pella, Marvin, Milgard, Jeld-Wen, PGT, CGI, and ES Windows among them - and the custom geometric work we do in Wellington leans heavily on the manufacturers who actually engineer shaped and impact-rated units rather than farm the work out. PGT is the one we specify most often for custom impact windows in Wellington. Their WinGuard and custom divisions give us true engineering on non-rectangular openings, and we have set hundreds of their units across Palm Beach County. When a homeowner wants a hurricane-rated arch or a trapezoid transom that meets code, PGT is usually the first line we quote.
Therma-Tru handles our custom radius and arch door-lite work - when the shaped glass is integrated into an entry system rather than a standalone window - and Mr-Glass is a line we carry for homeowners who want a specific aesthetic in fixed geometric units without paying for a name-brand upcharge. We quote manufacturer lines side by side on paper, so you see exactly what you are buying and what each brand costs before you commit. If you have a shaped window from any other make - or a builder-grade original that never had a real warranty to begin with - we can template, order, and install the replacement.
Signs You Need Custom & Geometric Windows Right Now
- Fog or condensation between the panes. A failed seal on a geometric window is not something you can ignore, because you cannot buy an off-the-shelf replacement for an octagon or arch. The glass package has to be rebuilt or the whole unit replaced. In Wellington’s humidity, a blown seal also means moisture is working on the frame and the rough opening, and the longer it sits, the more you pay to fix it. If you live in Sugar Pond Manor or Greenview Shores and the transom over your front door looks frosted in the morning, it is time.
- Visible daylight or drafts around the frame. Shaped windows were often set fast by production builders in the 80s and 90s, and the sealant has given up. If you can feel air moving around a circle window in January, that unit is no longer doing its job for your cooling bill or your indoor air. Wellington homes run air conditioning roughly ten months a year. A leaking geometric window is a monthly tax on your electric bill until it is fixed.
- Cracked or bowed glass in an impact-rated unit. A crack in an impact window means the laminate has been compromised, and the unit will not perform as rated in the next storm. If you know your home is in a windborne debris zone - and much of Wellington is - a cracked shaped window is not an appearance issue, it is a code and safety issue. We will spec a direct replacement that matches the original engineering.
- Rot or soft spots in wood frames around shaped openings. Older Wellington homes with wood-framed circles and arches - particularly in the original village neighborhoods and along Big Blue Trace - get rot where the curved trim meets shingles or stucco. Once the frame goes soft, the window loses its seal and its structural grip. A replacement means pulling the unit, repairing or replacing the buck, and setting a new window that will not carry that problem forward. Do not wait until the window is loose enough to move with a push.
- You are renovating and the opening is not a standard size. More and more Wellington homeowners are re-trimming gables, re-working entries, or re-framing a living room wall, and the original rectangular window is now a shape that does not exist in a stock catalog. This is the right time to go custom - not after the framing is inspected and you are stuck with a rough opening that only a geometric unit will fit. We will template the new opening and get the order moving before the drywall crew is done.
Our Custom & Geometric Windows Process - Step by Step
- 1
Call and talk to a person - any day, any hour. You reach a live human at (561) 349-4826, not a voicemail tree. We ask about the opening, the age of the home, the neighborhood, and whether you know the original manufacturer. That conversation sets the scope, and we book a visit that works around your schedule. We will be there when we say, in uniform, with a truck that has our name on the door.
- 2
Site measure and consultation in your home. A background-checked technician comes to the house, measures the opening twice - digital and physical, because a shaped window does not forgive a lazy measure - and checks the frame, the rough opening, the header, and the condition of the surrounding wall. We look for the things that will bite you later: rot, out-of-square framing, inadequate flashing, and load-bearing questions around oversized glass. You get side-by-side manufacturer quotes on paper, with the exact model, glass package, and price.
- 3
Order and permit. Once you approve the quote, we pull permits if the job needs them - and an oversized opening or any structural change almost always does in Palm Beach County. We order the unit from the manufacturer with the exact template and specifications. You get a written timeline and a written warranty registration commitment under The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves the driveway on install day.
- 4
Installation day. The old unit comes out, the rough opening gets inspected and corrected if needed, and the new window goes in square, sealed, and flashed the way a Florida window has to be. We set custom shapes with a level of care a stock double-hung never demands. The crew cleans up, hauls off the old unit, and walks you through what was done. Then we register your warranties in writing while the truck is still in your driveway.
- 5
Done right - and if it is not, we make it right. Every custom and geometric window job carries the Done Right Promise. If something is not correct - a bind, a leak, a seal that fails, a unit that was not set square - you call us, and we fix it. No paperwork fight, no arguing, no fine print. That is the deal, and it stands whether you are in Westlake, Royal Palm Beach, or down in Lake Worth Beach.
How Much Does Custom & Geometric Windows Cost in Wellington?
A typical custom geometric window in Wellington runs $1,800 to $3,800 for a fixed unit with standard low-E insulated glass and a vinyl or aluminum frame. Add impact rating and the range moves to $3,000 to $5,500 for most shaped openings. A curved-glass or eyebrow unit is the top of the range - $4,500 to $6,500 per opening, sometimes more for a true radius with laminated glass. An oversized opening with mulled units and structural reinforcement can exceed $10,000 when you are spanning eight or ten feet of glass in a lakefront wall.
What moves the price: the shape itself (a circle costs more than a rectangle to template and fabricate), whether the glass is impact-rated, the frame material, the glass package - tinting, low-E coatings, gas fill - and whether the existing rough opening needs repair. We have pulled rotted wood bucks out of Wellington homes that added $800 to a job before the window even went in. That is not a surprise line item if it is quoted up front, and we quote it up front.
How to avoid overpaying: get a line-item quote, not a lump sum. Ask whether both warranty layers will be registered in writing and what the workmanship warranty covers. Ask who actually bends the glass if the job is curved. And do not shop on price alone - a shaped window that leaks or fails in three years costs you twice, and you will still be looking at the same opening. Our estimates are free, and you will see the numbers before you sign anything. Call (561) 349-4826 and we will come template and price your opening without obligation. We also offer a permanent 5% discount for seniors and veterans, and a free written repair estimate.
Custom & Geometric Windows Near Wellington - Our Service Area
TruePane Windows & Doors serves Wellington and the surrounding communities across central Palm Beach County - Belle Glade, Loxahatchee Groves, Westlake, Palm Springs, Royal Palm Beach, Greenacres, Atlantis, and the Westgate neighborhoods of West Palm Beach. We also cross into Lake Worth Beach and Lantana for custom work. Most custom window calls in Wellington itself get a site visit within a day or two, and we keep the same standard wherever the address is. You can also see our broader service range from the home page.
Serving Wellington, FL - Our Local Coverage Area
We’re based in the Wellington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Custom & Geometric Windows in Wellington
A custom or geometric window is any fixed or operable window that is not a standard rectangular size or shape - circles, arches, half-rounds, hexagons, octagons, trapezoids, and true curved-glass units. These are manufactured to order from a template of your exact rough opening. In Wellington, they are common as accent glass in gables, over entry doors, and in high-ceiling rooms where a stock window would not fit the architecture.
Most custom and geometric windows take two to four weeks from the day we template the opening to the day the unit is on your wall. The manufacturer’s fabrication time is the long pole, and impact-rated curved glass can push toward six weeks. We give you a written timeline at the quote, and we stick to it. Call (561) 349-4826 for a current lead time.
A fixed custom shape in Wellington typically runs $1,800 to $3,800 installed, with impact-rated units at $3,000 to $5,500. Curved glass and oversized openings top out above $6,500. The exact number depends on shape, glass package, frame material, and the condition of your rough opening. Estimates are free and itemized.
Yes. We are an authorized installer for PGT, Therma-Tru, Mr-Glass, and more than a dozen other manufacturer lines. We specify PGT for most custom impact work in Wellington because their custom division handles non-rectangular openings well. Bring us any brand and we will quote the replacement or repair.
A shattered shaped window is an immediate problem for security, weather, and in many Wellington homes, code compliance if it is an impact-rated unit. We answer the phone 24/7 at (561) 349-4826, and on genuine emergencies we board and secure the opening, then template the replacement as fast as the manufacturer can produce it. A live person will pick up - no voicemail, no after-hours runaround.
Every custom and geometric window we install carries both manufacturer warranty layers - glass and frame - registered in writing before our truck leaves your driveway, plus our Done Right Promise on workmanship. That means if the install is not right, we fix it at no charge. No arguing, no fine print.
Clear the area inside and outside the opening - move furniture back three or four feet, take down window treatments, and move anything fragile off nearby shelves. If you have a security system on the window or a fence or landscaping outside that blocks access, let us know when we book the job. We handle the rest, including haul-off of the old unit. Call (561) 349-4826 and we will walk you through it.
Schedule Your Custom & Geometric Windows Service in Wellington Today
Call (561) 349-4826 and a live person in Wellington will answer. We will schedule a site visit, template your opening, and hand you a line-item quote with the manufacturers and prices on paper. No obligation, no pressure, and a square deal on every custom window. Done right - that is the standard on the first visit and the baseline for every callback.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Wellington since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.