Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterWhy Wellington Homeowners Choose Therma-Tru Windows & Doors
TruePane Windows & Doors provides independent Therma-Tru door and window service throughout Wellington, FL, from entry-door hinge realignment to full replacement installs on Classic-Craft, Fiber-Classic, Smooth-Star, and Pulse lines. What sets our Therma-Tru work apart is that we see the product the way a glazier sees glass: not as a brand to defend, but as a set of specific parts, seals, and tolerances that either hold up in south Florida or fail in predictable ways. And in Wellington’s heat, humidity, and 140-mph wind-load environment, those failures show up earlier than the manufacturer’s generic literature ever admits. We’re not an authorized Therma-Tru dealer, and we don’t pretend to be. We’re the independent shop that fixes what the authorized channel misses or wants to replace outright. Call (561) 349-4826 to talk through what you’re seeing.
Why Trust TruePane Windows & Doors for Your Therma-Tru Windows & Doors?
Therma-Tru products carry a strong reputation for curb appeal and energy performance, but they live or die on installation tolerances and the small parts nobody thinks about until a door binds or a corner seal lets condensation through. Our technicians have spent years working on Therma-Tru doors and windows across Wellington’s storm-prone climate, focusing on hinge wear, seal failure, and frame racking that manufacturer-authorized shops often overlook because they’re trained to sell replacement units, not rebuild what’s salvageable. Dale Kessler grew up in Wellington’s Paddock Park neighborhood and has spent going on three decades measuring, setting, and sealing windows and doors in Palm Beach County. He’s seen the same Therma-Tru failure modes repeat across Olympia, Versailles, and the Polo estates, and his standing rule applies to every brand we touch: if it’s not right on the paperwork, it won’t be right on the wall. That means both manufacturer warranty layers get registered in writing with durations stated before our truck leaves your driveway, and our Done Right Promise backs the workmanship with no paperwork fights. We use factory-spec Therma-Tru weatherstripping, corner pads, and hinge kits whenever available, and when supply delays demand otherwise, we tell you plainly before we substitute a part.
Common Therma-Tru Windows & Doors Problems We Fix in Wellington
- Warped door slabs on west-facing Fiber-Classic entries. A Fiber-Classic door on a Wellington home with full afternoon sun absorbs enough heat to delaminate the fiberglass skin from the stile. The first sign is usually daylight at the top corner and a latch that won’t catch without lifting the handle. We removed one from a Versailles home this season where the slab had delaminated at the hinge stile beyond any repair worth making. The fix was a new Fiber-Classic slab with upgraded corner pads and a compression sweep, and the latch realigned for a clean seal.
- Failing compression bulb seals on Classic-Craft door bottoms. Classic-Craft doors use a compression bulb weatherstrip along the bottom sweep that flattens permanently after a few south Florida summers. Once it loses its memory, water and pests get in at the threshold. We stock factory-spec replacement seals and can swap one in about an hour.
- Corner seal breakdown on Smooth-Star patio doors. Smooth-Star patio door panels are notorious in our climate for corner seal failure where the horizontal and vertical weatherstripping meet. You’ll notice a draft at ankle level or condensation along the bottom corners. The fix is new corner pads and reseating the weatherstripping track, not a whole new door.
- Sagging hinge stiles on heavy Classic-Craft doors. Classic-Craft slabs are heavy, and over fifteen or twenty years the hinge-side stile can deflect enough to drop the latch below the strike plate. The door rubs, scrapes, and eventually won’t latch at all. We rebuild the hinge pockets with reinforced plates and rehang the slab to spec rather than shimming the hinges and hoping.
- Threshold and sweep failures causing air leaks. On older Therma-Tru installs around Wellington, especially pre-2002 construction in neighborhoods like Palm Beach Polo, the original aluminum thresholds get pitted and the sealing surface loses its flatness. We source equal-gauge aftermarket thresholds when factory stock is delayed and bed them in a full bead of sealant so the sweep makes even contact across the full width.
Therma-Tru Parts & Our Repair-vs-Replace Approach
We use factory-spec Therma-Tru weatherstripping, corner pads, and hinge kits whenever available, but source equal-gauge aftermarket thresholds and sweeps when supply delays demand. We won’t tell you a patch is as good as a replacement when it isn’t. If a slab is cracked or delaminating, we recommend full replacement over patching to preserve the door’s structural integrity in hurricane conditions. A door that looks fine in February has to hold against September wind loads, and a patched slab won’t. For smaller issues, we keep common Therma-Tru parts on the truck, which means most repair calls in Wellington are finished in one visit. Call (561) 349-4826 for a straight answer on whether your door is a repair or a replacement, and what each one costs in writing.
Our Therma-Tru Service Process - Step by Step
- 1
Diagnosis on site. We measure the slab reveal on all three sides, check hinge wear, test the sweep compression, and inspect corner seals with the door closed against daylight. If it’s a Therma-Tru window, we check the sash alignment and weatherstripping track before anything else. You get the findings in plain language, not a sales pitch.
- 2
Repair or replacement with the right parts. Factory-spec Therma-Tru weatherstripping, hinge kits, and corner pads go in first. If we substitute a part, you hear about it before we install it. If the slab is beyond saving, we quote the replacement with manufacturer lines side by side on paper so you see exactly what you’re buying.
- 3
Testing after the work. We close the door on a dollar bill at six points to confirm even seal compression, check for light leaks, and cycle the latch a dozen times. On replacement installs, we verify the rough opening is square and the slab hangs within tolerance.
- 4
Warranty registration in writing. Both manufacturer warranty layers get registered before the truck leaves, with durations stated on paper. The Done Right Promise covers our workmanship. If it’s not done right, we make it right, no arguing.
Therma-Tru Products We Service & Install in Wellington
We service and install all four major Therma-Tru lines Wellington homeowners are most likely to have: the Classic-Craft Collection, the Fiber-Classic Series, the Smooth-Star Series, and the Pulse Series. Classic-Craft is the high-end fiberglass line with the look of real wood grain and a lot of weight. Fiber-Classic is the mid-tier fiberglass option that holds finish longer than steel but has the sun-exposure issues we described. Smooth-Star is the smooth-finish fiberglass line common in planned-community builds, and Pulse is the wood-edge alternative. We carry common parts for all four on the truck and can order any factory component within days. We also install replacement Therma-Tru doors to current Palm Beach County impact standards for homeowners upgrading from hollow-core or non-impact French doors.
We Also Service These Brands
Therma-Tru is one brand among many we work on daily. Our crews also service and install PGT, CGI, CWS, and ES Windows products, which means we don’t push a single brand because we have inventory to move. When we quote a Therma-Tru repair alongside a PGT replacement, you get both numbers on paper and an honest recommendation.
FAQs - Therma-Tru Windows & Doors Service in Wellington
The corner pads on Smooth-Star patio doors are the weak point in the weatherstripping system, and south Florida humidity accelerates the breakdown. The pads flatten and the horizontal weatherstripping pulls away from the vertical track, leaving a gap you’ll feel at ankle level or see as condensation on the glass corners. The fix is a new corner pad set and reseating the weatherstripping, which takes about an hour on most Wellington homes. Call (561) 349-4826 and we’ll quote it over the phone after a few questions.
If the fiberglass skin has delaminated from the stile, the slab is done and no straightening will hold through a hurricane season. If the warp is minor and the skin is still bonded, hinge stile reinforcement and a rehang can buy you years. We’ll tell you which one you have after measuring the reveal and checking the bond. A replacement on a west-facing Fiber-Classic in Wellington is a common call, and we quote it honestly against the repair cost.
The compression bulb weatherstrip on Classic-Craft bottoms flattens under constant exposure to heat and humidity, and once it loses its memory, it never recovers. If your door faces south or west in Wellington, expect to replace the sweep every two to three years. It’s a cheap part and a fast fix, but ignoring it lets moisture and pests into the threshold. Call (561) 349-4826 if you can see daylight under the door.
Generally no. Classic-Craft slabs are heavy enough that undersized aftermarket hinges will sag within a season, and then you’re back to a door that won’t latch. We use factory-spec Therma-Tru hinge kits or equal-gauge replacements that match the door’s weight rating. Saving thirty dollars on hinges usually costs a full rehang in under a year.
On most older Therma-Tru doors in Wellington, the heat gain isn’t the slab, it’s the seals. Replacing worn bottom sweeps, corner pads, and weatherstripping seals the air leaks that make the door feel drafty and force your AC to work harder. If the slab itself has failed, we’ll tell you straight and quote a replacement that meets current Palm Beach County energy and impact codes.
Simple repairs like sweep and seal replacement on Therma-Tru doors in Wellington typically run $100 to $300, while hinge stile reinforcement or full slab replacement starts around $800 and goes up with the model and finish. Classic-Craft replacement doors are the most expensive line we install by a wide margin. Exact pricing depends on what failed, what parts we need, and whether the slab can be saved. Call (561) 349-4826 for a free estimate, in writing, before any work starts.
Book Your Therma-Tru Service in Wellington, FL
If your Therma-Tru door is binding, leaking, or just not sealing the way it did when it was new, we’ll look at it honestly and tell you what it needs. Call (561) 349-4826 to schedule your free estimate. A live person answers, 24/7.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Wellington since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.