Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Shingle, Tile & Metal Roofing in Wellington: What to Know First
We independently repair, replace, and maintain CWS shingle, tile, and metal roofing systems for Wellington homeowners, usually completing most CWS roof repairs within two to four business days once parts are on hand. The honest truth about pricing: CWS roofs, particularly tile and metal profiles, run higher on both materials and labor than generic asphalt systems, and a Wellington roof over twenty years old should be inspected before anyone quotes a number. If you own a CWS roof in Wellington and you’re seeing leaks, lifting tile, corroded metal panels, or shingle granule loss in your gutters, call (561) 349-4826. This page explains what we see on CWS roofs in this climate, how we fix them, and what it should cost.
Key Takeaways
- We’re an independent CWS service provider, not a CWS dealer or authorized warranty agent.
- Most CWS tile and metal failures in Wellington trace back to underlayment, flashing, or fastener issues, not the visible surface material.
- Repairs we quote are fixed: the price on paper is the price you pay.
- Free estimates, and a live person answers when you call.
How CWS Products Fail - and How We Fix Them
We work on enough CWS roofs in Wellington to know where they break first. Here’s what we find, by system type.
- CWS concrete and clay tile: cracked tiles at the hip and ridge lines. Wellington’s afternoon thunderstorms and the occasional tropical system drive wind-driven rain sideways. Hip and ridge tiles take the brunt, and once a tile cracks at the nail line, water gets underneath. We remove the broken tile, inspect the underlayment beneath (this is usually where the real leak is), replace rotted underlayment if needed, and set a matched replacement tile with the correct profile. No caulk smeared over a crack, which fails again in one season.
- CWS tile roofs with valley leaks at the flashing junctions. Valleys collect debris, and Wellington’s oak canopy means gutters and valleys clog fast. Debris holds moisture against metal flashing, corrodes it, and the leak starts. We replace valley metal with proper gauge material and re-secure the tile cuts. This is the most common CWS tile roof call we run in the winter, after leaf drop.
- CWS metal roofing: fastener back-out and neoprene washer failure. Exposed-fastener metal panels rely on screws with rubber washers. Wellington’s heat cycles bake those washers. They crack, the screw backs out, and you get a pinhole leak. We replace fasteners with upgraded washers and re-torque the adjacent rows while we’re up there. If the panels themselves are structurally sound, this is a same-visit fix.
- CWS asphalt shingle roofs: granule loss and early curling on south-facing slopes. South and west elevations in Wellington get brutal afternoon sun. Shingles on those slopes degrade years faster than the shaded side. We inspect the nailing pattern and underlayment condition before recommending a slope-specific repair or partial re-shingle. Patching a baked-out slope without checking the decking underneath is how you end up paying twice.
- CWS tile underlayment degradation from sustained humidity. Wellington sits in a high-humidity corridor, and older felt underlayment on CWS tile roofs from the late 1990s and early 2000s is reaching end of life. We see tile that looks fine from the ground while the underlayment beneath is crumbling. When we lift tile for any repair, we check what’s under it. If the underlayment is shot, we tell you plainly before quoting so there are no surprises mid-job.
Our CWS Shingle, Tile & Metal Roofing Process
- 1
You call (561) 349-4826. A live person answers, asks about your roof, and schedules a time that works. No voicemail tree.
- 2
We inspect. A background-checked technician walks the roof, checks the surface material, flashing, underlayment condition, and looks for the signs we described above. We take photos you can see.
- 3
We write the quote on paper. Line items, material choices (OEM where it matters, quality aftermarket where it’s equivalent), and a fixed price. If it’s not right on the paperwork, it won’t be right on the wall.
- 4
We do the repair. Correct fasteners, correct tile profile, correct flashing gauge. We protect the surrounding roof while we work.
- 5
We test and document. Water test on the repaired area, photos after completion, and a plain-English summary of exactly what was done.
- 6
We stand behind it. Every CWS roof repair carries our Done Right Promise. If it’s not right, we make it right. No arguing.
What CWS Shingle, Tile & Metal Roofing Costs in Wellington
CWS roof repair pricing in Wellington varies by system and scope, but here are the ranges we typically quote:
- Tile replacement (cracked or slipped tile), including underlayment patch: $280-$550 per tile section, depending on roof pitch and access.
- Valley flashing replacement on CWS tile: $600-$1,400 per valley, depending on length and debris removal required.
- Fastener and washer replacement on CWS metal roof (partial area): $450-$900 for most residential sections.
- Shingle slope repair, including decking inspection and partial re-shingle: $750-$2,200 depending on square footage and decking condition.
- Full underlayment replacement under CWS tile: $6.50-$11 per square foot of roof area, depending on tile removal and reset complexity.
What moves the price: roof pitch and access, condition of what’s underneath the surface material, and whether we’re matching specific CWS tile profiles that are no longer in full production. We give you the quote before work starts, and the price doesn’t change unless we both agree in writing first. Call (561) 349-4826 for a free estimate.
Why Wellington Homeowners Call TruePane Windows & Doors for CWS Work
We’ve been doing this work in Palm Beach County since 2008, and Dale Kessler grew up right here in Wellington’s Paddock Park neighborhood, so we know what this climate does to a roof. We show up when we say, in uniform, with a background-checked technician who knows CWS systems specifically. We quote side by side on paper so you see exactly what you’re buying. And because we also service PGT, CGI, ES Windows, and ECO Window Systems, we can handle the skylights, impact windows, and related openings that other roofing-only crews leave behind. One crew, one standard, one phone number. If the pane isn’t true, the job isn’t done, and the same thinking applies to every CWS roof we touch.
FAQs
Yes, in most cases we source original CWS tile profiles through salvage and specialty suppliers or match them with equivalent profiles when the original line is out of production. We verify availability before we quote, so you’re not waiting on a part that doesn’t exist. Call (561) 349-4826 and we’ll check your specific profile.
As an independent CWS service provider, we can’t speak for CWS’s warranty terms, but we use manufacturer-correct fasteners, tile profiles, and flashing materials on every repair. The CWS warranty you have is between you and the manufacturer. Our repair work carries its own written promise: the Done Right Promise in writing before we leave the driveway. Call (561) 349-4826 to discuss your specific situation.
Repair makes sense when the surface material is sound and the issue is isolated: a few cracked tiles, one valley, fastener failure on a metal panel. Replacement is the right call when the underlayment has failed across a large area or the decking shows rot. We’ll tell you honestly which category you’re in after inspection, with photos and a written explanation. Call (561) 349-4826 to schedule a free inspection.
We schedule most CWS roof inspections within two to three business days, and when we identify the leak, we can often complete the repair on the first visit if parts are in our truck stock. Emergency tarp service is available when a Wellington storm has opened a roof up. Call (561) 349-4826, and a live person will get you on the schedule.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Wellington and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.