Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterES Windows Custom & Geometric Windows in Wellington: What to Know First
Custom and geometric ES Windows in Wellington fail differently than standard rectangles, and the repair requires a shop that understands radius bends, mitered corners, and how Florida humidity works on laminated glass. We service the full range of ES Windows shaped units, arched tops, trapezoids, octagons, and oversized openings, with most jobs quoted within 48 hours and completed in one to two visits. Pricing lands in the mid-to-upper range because geometric glass is not a commodity, and neither is the labor to set it true. We are an independent ES Windows service provider, not a factory-authorized shop, which means we answer to you, not to a warranty department quota.
This page is written for ES Windows owners in Wellington who have a fogged arch, a leaking trapezoid, or a binding radius window and want to know if it can be saved, what it costs, and who to call. That number is (561) 349-4826. A live person answers, day or night.
How ES Windows Products Fail and How We Fix Them
ES Windows builds a solid aluminum frame, but in Wellington’s heat and storm cycles, the weak points show up at the corners and the glass edge. Here are the failure modes we see repeatedly on custom and geometric units, including the ones a homeowner cannot diagnose from a brochure.
- Fogged insulated glass in ES Impact Series arches. The seal fails first at the apex of the curve, where the spacer bar bends tightest. In Wellington, the wet season drives moisture into that bend until the argon escapes and the glass turns milky. The fix is a replacement insulated glass unit bent to the original radius, which most glass shops in Palm Beach County will not attempt. We do.
- Water intrusion at mitered corners on ES trapezoid and triangle units. The factory sealant at a 22.5-degree or 45-degree miter cannot hold forever against Wellington’s afternoon downpours. When the corner seal breaks down, water runs inside the frame and wets the drywall below. We pull the sash, clean the miter, re-seal with a marine-grade adhesive, and reset the unit.
- Binding operators on ES casement and awning windows in large custom sizes. The stainless steel hinge hardware ES uses is good, but on a 6-foot-tall arched casement, the weight of laminated impact glass eventually wears the hinge pins. You will feel the crank get stiff, then hear a pop. We replace the hinge set and re-shim the sash so the glass weight hangs square, not on the operator gears.
- Stress cracks in ES picture windows with radius tops. A circular or arched lite under constant Florida sun expands against a frame that does not give. If the original installation left the setting block off-center or the frame out of square by even an eighth of an inch, the glass cracks from the edge in. We see this in Wellington homes where the original builder crew rushed the opening. Our fix starts with measuring the opening to the sixteenth of an inch before we order glass, because a replacement lite set in the same out-of-true frame cracks again.
- Failed glazing tape on ES fixed geometric windows, usually octagons and half-rounds. The factory tape degrades faster on shapes with more perimeter per square foot of glass. Once it lets go, the lite rattles in wind and leaks air. We remove the old tape, clean the channel, and reset the glass on fresh structural tape rated for impact duty.
Our ES Windows Custom & Geometric Windows Process
A geometric window is not a swap-it-and-go job. Here is how we handle it, and why we do not cut corners.
- 1
Call and describe the window. You reach a live person at (561) 349-4826. We ask which wall it is on, what shape it is, and what you are seeing: fog, leak, crack, binding. That tells us whether to bring glass tools or frame tools on the first visit.
- 2
Measure the opening, not just the glass. We measure the frame diagonals and the rough opening, because a replacement lite for a geometric window must match the actual opening, not the original spec sheet. If the original install was out of square, we note it and tell you before we order anything.
- 3
Parts decision: OEM or better. We quote ES factory parts where they still exist and are the right call. Where the factory part is a known weak point, like the tape on octagons, we quote a high-grade aftermarket option and tell you why. You see both numbers on paper before you sign.
- 4
The repair. We remove the failed glass or hardware, clean every channel, and set the new lite or part with the same care as a new install. Uniformed, background-checked techs, and we treat your floor like our own.
- 5
Test and document. We run water on the exterior, cycle the operator if there is one, and check for square with a level. Both manufacturer warranty layers get registered in writing before we leave.
- 6
Guarantee. The work carries our Done Right Promise. If it is not right, we fix it. No paperwork fight.
What ES Windows Custom & Geometric Windows Costs in Wellington
Geometric glass is priced by the square foot of the lite plus the complexity of the shape. In Wellington, here is what we typically see:
- Fogged arch or half-round replacement lite: $600 to $1,400, depending on radius and glass type.
- Trapezoid or octagon insulated unit replacement: $450 to $1,100, more if impact-rated.
- Casement or awning hinge replacement on large ES windows: $180 to $520 per window, hardware and labor.
- Full geometric window replacement (custom-sized, impact-rated): $2,200 to $5,500 per opening, and that is honest because curved laminated glass is not cheap to manufacture or ship.
What moves the price: shape complexity, glass type (impact vs. standard), access (second-story or over a pool cage), and whether the frame itself has pulled out of square. We do not pad the quote and we do not add surprise line items. Call (561) 349-4826 and we will price your specific window, free.
Why Wellington Homeowners Call TruePane Windows & Doors for ES Windows Work
Dale Kessler grew up in Wellington’s Paddock Park neighborhood. He learned glazing tolerances nights at Palm Beach State College and spent days shadowing every installer who would let him carry a lite of glass. That is why our techs treat a curved ES lite as a geometry problem first, not a parts-order problem. We have been setting and sealing windows in Palm Beach County for going on three decades, and the rule on the whiteboard has not changed: if the pane is not true, the job is not done.
We are an authorized installer for more than a dozen window and door lines, so when an ES window is beyond saving, we can quote a replacement from PGT, CGI, CWS, or ECO Window Systems side by side on paper. That means you make a real choice, not a forced one. Every job carries the Done Right Promise and The Keystone Standard: both warranty layers registered in writing before the truck leaves your driveway. Call (561) 349-4826 and you will speak to a person, not a phone tree.
FAQs
As an independent ES Windows service provider, we cannot submit claims to the ES factory warranty on your behalf, but we can often repair the window for less than the hassle of a claim, and we register all workmanship and material warranties in writing under The Keystone Standard. If you are still within the ES warranty window, we will tell you honestly whether it is worth pursuing the factory route before you spend anything.
Most replacement insulated glass units for arched or radius ES windows arrive from our glass fabricator in 5 to 12 business days, and the installation itself is a single visit of two to four hours. For badly out-of-square openings that need frame correction, expect a second visit.
If the frame is square, the hinges are sound, and the glass is the only failure, repair is almost always the better value. If the frame has pulled, the miter joints are separating, or you are chasing a leak for the second time, replacement with a new unit from ES, PGT, CGI, CWS, or ECO Window Systems is usually money better spent. We will quote both paths on paper so you see the honest numbers side by side. Call (561) 349-4826 for a free assessment.
We use ES factory parts where they are available and are the right fix. Where the factory part is a known weak point, like the glazing tape on octagons and half-rounds, we quote a higher-grade aftermarket option and explain the difference before you sign. As Dale Kessler says, if it is not right on the paperwork, it won’t be right on the wall.
If you own an ES Windows custom or geometric window in Wellington and it is fogging, leaking, binding, or cracked, call (561) 349-4826. We will measure it, price it straight, and stand behind the work in writing.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Wellington and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.