Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterECO Window Systems Roof Repair in Wellington: What to Know First
ECO Window Systems roof repair in Wellington typically runs $285 to $1,900 depending on whether we’re replacing a failed skylight seal, resetting a roof-window flashing kit, or rebuilding the curb a leaking unit sits on. We’re an independent ECO Window Systems service provider, not a factory arm, so we quote what the repair actually needs, not what the warranty department wants to hear. Most ECO Window Systems roof work in Wellington is completed in a single visit once parts are in hand.
This page is for homeowners in Wellington who own a ECO Window Systems skylight, roof window, or glazed roof panel and have noticed water staining, condensation between glass, or a unit that no longer closes square. If that sounds familiar, call (561) 349-4826 and a live person will answer. We’ve been setting and sealing glass in Palm Beach County for going on three decades, and Dale Kessler, our founder, grew up in Paddock Park, so the roof issues this climate creates are not new to us.
How ECO Window Systems Products Fail - and How We Fix Them
- Insulated glass seal failure on ECO Vision series skylights. Wellington’s afternoon heat and overnight humidity swing hits double-pane skylight seals harder than almost any other product we service. The ECO Vision series uses a butyl primary seal that, after eight to ten years of Florida sun, can develop internal fogging that factory documentation often misdiagnoses as “condensation.” What we find on site is a seal bead that has lost adhesion along the low edge of the glass, where water pools after every storm. We replace the insulated glass unit with an aftermarket IGU cut to the same thickness and gas fill, because ECO Window Systems no longer ships Vision-series glass for units older than seven years.
- Flashing-kit corrosion on ECO SkyMax roof windows. The SkyMax line’s factory flashing is aluminum, and when it’s installed tight against treated lumber or copper roofing, galvanic corrosion sets in within a few seasons. Wellington homes with copper valleys or standing-seam metal roofs see this failure mode far more often than the manufacturer’s installation guide admits. The telltale sign is chalky white powder at the flashing corners and water that tracks inward along the sash hinge, not the glass. We fabricate a PVC isolation layer, reset the flashing, and replace the corroded corners with coated aluminum so the repair outlasts the original install.
- Operator-arm wear on ECO Horizon venting skylights. The Horizon series uses a scissor-arm operator that holds the vented unit open. Once that arm’s pivot bushings wear, the skylight won’t stay open, and more importantly, it won’t seat fully closed, leaving a hairline gap that invites mosquitoes and humidity. Owners often assume the seal failed. The fix is a replacement operator assembly, not a whole new skylight, and we keep both OEM and quality aftermarket arms on the truck. The aftermarket units we use are machined brass-bushed, not nylon, which is an upgrade the factory doesn’t offer.
- Curb rot on flat-roof ECO fixed skylights. In Wellington neighborhoods like Olympia and Sugar Pond Manor, we see flat-roof fixed ECO skylights sitting on curbs framed with untreated pine. Twenty years of afternoon downpours softens the curb, the unit sags, and the interior leak is blamed on the skylight when the skylight was never the problem. We rebuild the curb with pressure-treated lumber, pitch it correctly, and reset the ECO unit with a new sealant bed. If the original installer had flashed it right, the original unit would still be dry.
- Inner-pane coating delamination on ECO SolarCool glass. ECO’s SolarCool line has a low-e coating applied to the inner surface of the outer pane. When water vapor breaches the seal, that coating can delaminate and leave a permanent white veining that looks like trapped moisture but will never clear. Factory service will tell you it’s within spec because the glass isn’t cracked. Our position after servicing dozens of these units across Wellington is that a delaminated SolarCool pane is a failed pane, and we replace it without requiring a warranty adjuster’s blessing.
Our ECO Window Systems Roof Repair Process
- 1
Call and talk to a person. You call (561) 349-4826, describe the symptom, and we schedule a site visit. No form, no callback queue.
- 2
On-site diagnosis. A background-checked, uniformed technician inspects the unit, the curb or flashing, and the surrounding roof deck. We identify whether the failure is glass, sealant, operator, or framing before we quote anything.
- 3
Parts decision on paper. We sit down with you and show OEM versus quality aftermarket options side by side, with prices, so you see exactly what you’re buying. If it’s not right on the paperwork, it won’t be right on the wall.
- 4
The repair. We reset or replace the failing component, re-flash as needed, and seal per the original manufacturer’s installation method, not a shortcut. Most ECO roof repairs are completed in one visit.
- 5
Water-test and inspection. We run a hose test at low pressure, check the interior for moisture, and confirm the unit opens, closes, and seats properly.
- 6
The Keystone Standard close. Before we leave, we register warranty coverage in writing, state the duration, and confirm the Done Right Promise on the repair. If it’s not right, we make it right. No paperwork fight.
What ECO Window Systems Roof Repair Costs in Wellington
Here’s what we’ve charged on recent ECO Window Systems roof work in Wellington. These are honest ranges, not estimates you’ll find elsewhere, because most shops won’t publish numbers this specific.
- Insulated glass replacement for ECO Vision or SolarCool skylights: $420-$890 per unit, depending on size and whether the low-e coating is required.
- Flashing and curb re-seal for ECO SkyMax roof windows: $180-$520, including removal of old flashing and new sealant bed. Full curb rebuild on flat roofs runs $650-$1,400.
- Operator arm replacement for ECO Horizon venting skylights: $110-$310 installed, parts included.
- Full skylight replacement with comparable unit (when repair isn’t worth it): $1,200-$2,900 installed, including new flashing kit and water test.
What moves the price is roof accessibility, curb condition, and whether the unit is still under any transferable manufacturer warranty, which is rare on ECO products older than five years. Call (561) 349-4826 for a written, line-item estimate. It’s free, and the number we quote is the number you pay.
Why Wellington Homeowners Call TruePane Windows & Doors for ECO Window Systems Work
We’ve been doing glass work in Palm Beach County since 2008, and Dale Kessler founded this company in 2008 because out-of-true installs and voided warranties on skylights and windows were problems worth fixing permanently. The Done Right Promise means if your ECO repair isn’t right, we come back and make it right. No arguing. The Keystone Standard means both warranty layers on any replacement product are registered in writing before our truck leaves your driveway.
We’re an authorized installer for more than a dozen manufacturer lines including Andersen, Pella, Marvin, PGT, CGI, and ES Windows, so if your ECO unit has reached the point where replacement makes more sense than repair, we can quote you side-by-side options from brands with local parts support and transferable warranties. The live person who answers our phone at 3 a.m. during a summer storm is the same company that sponsors the Wellington Green Farmers Market and local church roof funds. We plan to be here in thirty years, because our kids go to school here.
FAQs
No. As an independent ECO Window Systems service provider, we perform repairs that comply with the original installation method and use parts that meet or exceed the original spec, so a covered failure remains covered. If your unit is still under an active ECO factory warranty, we’ll tell you before touching anything, and we’ll document the repair so the warranty stays enforceable.
Many ECO parts are discontinued, especially for the Vision and early SolarCool series, because the company has cycled through product lines faster than replacement-part demand. We keep the most common failure items in stock locally, and when OEM parts are unavailable, we source quality aftermarket components that match the original glass thickness, coating, and gas fill. Call (561) 349-4826 with your model number and we’ll tell you the parts situation before you commit to a site visit.
If the failure is a seal or flashing issue and we have the right part on hand, we usually complete the repair in one visit and often within the same week you call. Full curb rebuilds or custom IGU orders take longer, typically seven to ten business days, because the glass is fabricated to spec. In a storm emergency, we can temp-seal the unit the day you call to stop water coming in, then do the permanent repair correctly afterward.
If the frame and curb are sound and the failure is glass or an operator part, repair usually makes sense and runs a third or less of replacement cost. If the flashing has been leaking long enough to rot the curb or the roof deck beneath it, or if the unit is over fifteen years old, replacement is often the better long-term call. We’ll show you the numbers on paper for both paths and let you decide. Estimates are free at (561) 349-4826.
Yes. We service and install PGT, CGI, CWS, and ES Windows products regularly, and we’re an authorized installer for more than a dozen manufacturer lines. If your ECO repair leads you to consider replacement, we can quote several brands side by side so you see exactly what each one costs and covers.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Wellington and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.