Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
ECO Window Systems Roof Replacement & Installation in Wellington: What to Know First
We provide independent ECO Window Systems roof replacement and installation in Wellington, with most jobs completed in a single visit and a written line-item quote before any work begins. As an independent ECO Window Systems service provider, we’re not tied to a manufacturer’s script, so we replace what’s actually failing and leave what’s still sound. Typical roof-related window and skylight work runs $850 to $3,400 depending on the unit and flashing condition, and every job carries our Done Right Promise.
This page is for Wellington homeowners who bought ECO Window Systems products years ago and are now dealing with leaks, failed seals, or storm damage tied to roof replacement. If that’s you, call (561) 349-4826 and a live person will answer. Dale Kessler and our crew have worked on ECO units in neighborhoods from Paddock Park to Olympia, and we’ll tell you straight what’s repairable and what’s done.
Key Takeaways
- We’re an independent ECO Window Systems service provider in Wellington, not a manufacturer rep, and we quote repairs and replacements side by side on paper.
- Most ECO roof replacement and installation jobs finish in one visit, with both warranty layers registered before we leave the driveway.
- Wellington’s storm season and relentless sun shorten the life of roof-mounted glazing, and we account for that in every assessment.
- Every job is covered by the Done Right Promise, with pricing stated upfront and no change orders on the back end.
How ECO Window Systems Products Fail, and How We Fix Them
ECO Window Systems builds solid mid-range impact and high-performance units, and we’ve set more than a few of them in Wellington homes over the years. But roof-adjacent and roof-mounted glazing lives a harder life than wall windows, and we see the same failure patterns repeat in this climate. Here’s what actually goes wrong and what we do about it.
- Flashing and curb seal breakdown on roof-mounted skylights and glazing panels. The sealant between the roof curb and the ECO frame dries and cracks under Wellington’s ultraviolet load, usually within eight to ten years. The unit itself is often fine. We strip the old sealant, reset the curb with fresh flashing and a compatible sealant, and retest for water intrusion before we call it done.
- Condensation between panes on ECO insulated glass units. The desiccant strip inside the spacer eventually saturates, and Wellington’s humidity pushes the rest of the way. Once you see fog you cannot wipe away, the seal has failed, not the frame. We measure the opening, order a matching insulated unit with the same low-E coating and gas fill, and set it the same day it arrives.
- Roof runoff staining and channel clogging on ECO awning and casement units. When gutters overflow or roof water sheets onto the frame, silt builds in the weep channels and water backs up into the track. On Wellington homes without gutter guards, this shows up within a few seasons. We clear the channels, verify the drainage path, and often add a low-profile diverter so it stops happening.
- Impact glass stress cracks from roof debris. A branch or roof tile coming off in a summer squall can crack the outer lite of an ECO impact unit while the inner lite holds. The glass is doing its job. We replace the lite with an OEM-spec pane matched to the original thickness and interlayer, so the unit keeps its impact rating.
- Hardware corrosion on roof-adjacent units. Salt air and roof runoff accelerate rust on hinges, locks, and operator arms on ECO units near roof valleys and scuppers. We replace hardware with the same grade components, never the cheap zinc lookalikes, and adjust the sash so it seats square.
If the pane is not true, the job is not done. That rule governs how we approach every ECO unit we touch, whether it’s a skylight over a living room or an awning window under a leaking eave.
Our ECO Window Systems Roof Replacement & Installation Process
We’ve learned many years in this community that a roof replacement or installation job goes wrong when someone skips the diagnosis and starts pulling glass. Here’s how we do it.
- 1
Call and schedule. You call (561) 349-4826, a live person answers, and we set a window. We’ll be there when we say.
- 2
On-site assessment. Our technician measures every opening twice, inspects the flashing and curb condition, and figures out exactly what’s failing and what’s still serviceable.
- 3
Written quote, side by side. We put the repair option and the replacement option on paper, with line items and real numbers. No vague allowances.
- 4
Parts decision. Where the ECO OEM part is warranty-safe and available, we use it. Where a quality aftermarket component performs the same or better for less, we tell you and you choose.
- 5
The work. We remove the old unit without wrecking the surround, set and level the replacement, flash and seal it properly, and clean the area before we start packing up.
- 6
Test and register. We water-test the unit, operate it through its full range, and register both manufacturer warranty layers in writing before the truck leaves the driveway. Then we walk you through what we did and what you’re covered for.
If it’s not right on the paperwork, it won’t be right on the wall. That’s a Dale Kessler rule, and it holds for every ECO job we take.
What ECO Window Systems Roof Replacement & Installation Costs in Wellington
Here’s what Wellington homeowners can expect to pay for common ECO roof replacement and installation work, based on jobs we’ve quoted in this market.
- Single ECO skylight replacement with new flashing: $850 to $1,900, depending on size and whether the curb needs rebuilding.
- Insulated glass unit replacement for one ECO window: $350 to $800, depending on glass size and coating spec.
- ECO awning or casement unit replacement under a roof eave: $1,100 to $2,400, including removal, new unit, flashing, and sealant.
- Full roof-adjacent window package on one wall: $3,000 to $6,500, depending on the number of openings and impact-rating requirements.
- Flashing and reseal service for existing ECO units: $250 to $700 per unit, including inspection and water test.
What moves the price is the opening size, whether the curb or sill is rotted, and whether the unit carries an impact rating that has to be matched. We write every quote as a fixed price, so the number on the page is the number on the bill. Call (561) 349-4826 for an exact quote on your ECO unit. Estimates are free.
Why Wellington Homeowners Call TruePane Windows & Doors for ECO Window Systems Work
We’ve been serving local communities since 2008, and Dale Kessler founded TruePane in 2008 because out-of-true installs and voided warranties were problems worth fixing permanently. That starting point still shapes every ECO job we take in Wellington. Our technicians are background-checked and uniformed, and they work in a customer’s home the way they’d work in their own mother’s. A live person answers the phone 24 hours a day, seven days a week. No phone tree, no callback form.
We carry more than a dozen manufacturer lines, and when an ECO unit needs a full replacement, we show you PGT, CGI, CWS, and ES Windows side by side on paper so you can see exactly what you’re buying. The Done Right Promise stands behind it all. If it’s not done right, we make it right. No fine print, no arguing, no second appointment left hanging. We also offer a standing a free written repair estimate, a maintenance check, and a permanent 5% discount for seniors and veterans.
FAQs
Yes, and this is common with older ECO lines. We measure the opening and match a replacement unit from ECO’s current catalog or a compatible manufacturer line with the same dimensions, glazing spec, and structural performance. You get a written comparison before we order anything.
Replacing a failed unit with an OEM-spec part does not void the warranty, and we register both warranty layers in writing before our truck leaves the driveway. If the warranty is already expired, we’ll quote a repair or replacement that gives you a fresh warranty on the new components.
We repair and replace both. If the glass is intact and the leak is coming from failed flashing or sealant around the curb, we reseal and water-test the unit rather than selling you a whole new skylight. If the insulated glass is fogged or cracked, replacement is usually the only right fix.
Most jobs finish in a single visit once parts are on hand, and we schedule based on what’s safe and practical for Wellington’s weather. Call (561) 349-4826 and we’ll give you a realistic window, not a promise we can’t keep.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Wellington and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After