Mr-Glass Impact Windows Nationwide | TruePane Windows & Doors

Mr-Glass Impact Windows in Wellington: What to Know First

TruePane Windows & Doors provides independent Mr-Glass impact window repair, replacement, and installation throughout Wellington, FL. Most Mr-Glass impact window jobs here take one to two days once we have your units measured, and pricing typically runs between $850 and $2,400 per opening depending on size, glass package, and whether we’re replacing the sash or the full frame. We’re not tied to Mr-Glass as an authorized dealer, which means we quote the repair or replacement that serves your house, not a manufacturer’s sales target.

Call (561) 349-4826

This page is written for Wellington homeowners who already own Mr-Glass impact windows or are weighing them against other lines. If you’ve got a fogged lite, a crank that binds, or a sash that doesn’t seal after a storm, call (561) 349-4826 and a live person will answer.

How Mr-Glass Products Fail - and How We Fix Them

Mr-Glass impact windows are a mid-market line, and like any brand, they have failure patterns we see repeat across Wellington. Here’s what we find most often:

• Intermittent seal failure on the Mr-Glass 7000 Series insulated units. The 7000 Series uses a butyl spacer system that holds up fine for years, but after eight to ten Wellington summers, the constant heat-and-rain cycle starts breaking down the secondary seal around the perimeter. You’ll notice condensation between the panes that comes and goes with the weather. The fix is a full insulated glass unit replacement, not a reseal, because the desiccant inside the spacer is already saturated by the time you see fog.
• Roller and track wear on Mr-Glass horizontal sliders. Wellington homes with Mr-Glass sliders get fine sand and shell grit worked into the bottom track. Over time, the nylon rollers grind flat and the sash starts dragging, then binding. What starts as “the door sticks a little” becomes a track replacement if it’s ignored long enough. We replace the rollers with upgraded stainless steel units and re-square the sash so it rides clean.
• Laminated glass delamination on Mr-Glass impact units exposed to full western sun. This one is specific: windows on the west-facing walls in Wellington catch three-plus hours of direct afternoon sun daily. The interlayer between the two lites of laminated impact glass can start to separate at the corners after a decade, showing as a milky edge. It’s a warranty-relevant defect if your registration is intact, and it’s also a safety issue because the lamination is what holds the glass together in a storm. We flag it immediately.
• Lock misalignment after settlement. Wellington sits on soil that shifts. Mr-Glass casement and awning windows, especially on second-story walls, can shift enough that the locking points no longer align. The window closes, but the handle won’t throw all the way. It’s a two-hour fix for us, adjusting the hinges and strike plate, but left alone it means the window isn’t actually sealed against wind pressure, which defeats the impact rating.
• Corroded hardware near the canal and lakefront properties. Mr-Glass uses zinc-alloy hardware on some series, and the salt-tinged air near Wellington’s canals and lakes eats it faster than the inland subdivisions. We replace corroded cranks, hinges, and handles with marine-grade stainless hardware that holds up in this specific environment. It costs more up front and lasts three times as long.

Our Mr-Glass Impact Windows Process

Here’s how a Mr-Glass job runs with us, from the first call to the final walkthrough:

1. 1
   We talk through the symptom. When you call (561) 349-4826, you’re speaking to a person who knows windows, not a dispatcher reading from a script. Tell us what you’re seeing, and we’ll tell you honestly if it sounds like something worth a service call.
2. 2
   We measure every opening twice. One of our background-checked, uniformed technicians comes out and measures the rough openings, checks the existing frame for square, and looks at how the current Mr-Glass units are set. The founding rule still holds: if the pane is not true, the job is not done.
3. 3
   We put your options on paper. If we’re replacing a lite or a sash, we’ll quote OEM Mr-Glass parts alongside quality aftermarket equivalents where they make sense. You’ll see the price for each, the lead time, and what the warranty covers on both. No verbal quotes, no surprises later.
4. 4
   We do the work in one visit when possible. Most Mr-Glass repairs and replacements are completed the same day we arrive with parts. We don’t leave a job half-finished and a second appointment hanging over your head.
5. 5
   We test the unit before we leave. We cycle the window, check the seal, verify the locks engage, and make sure drainage works. A window that opens smoothly on our workbench doesn’t matter if it binds in your wall.
6. 6
   We register both warranty layers in writing. Under The Keystone Standard, your manufacturer warranty and our Done Right Promise are both registered and handed to you before we pull out of the driveway. If something is not done right, we make it right. No paperwork fights, no arguing.

What Mr-Glass Impact Windows Costs in Wellington

Here’s honest pricing for the Mr-Glass work we do most often in Wellington. These are total installed ranges, not parts-only numbers:

• Insulated glass unit replacement (fogged single lite): $350 to $700 per lite
• Roller and track rebuild on a Mr-Glass slider: $180 to $420
• Hardware replacement (crank, hinge, lock set) with marine-grade parts: $120 to $350 per window
• Full Mr-Glass impact window replacement, standard size: $850 to $2,400 per opening
• Full-frame replacement with new Mr-Glass or upgraded PGT/CGI unit: $1,400 to $3,200 per opening

What moves the price is size, glass package, whether we’re reusing the existing frame, and whether the home is under Wellington’s current wind-load requirements, which affect the required design pressure rating. We write line-item quotes so you see exactly what you’re paying for before you sign anything. Call (561) 349-4826 for a free estimate on your Mr-Glass windows.

Why Wellington Homeowners Call TruePane Windows & Doors for Mr-Glass Work

Our owner, Dale Kessler, grew up in Paddock Park, which means the houses here aren’t job numbers to him. They’re the same streets he’s known his whole life. We’ve been serving this community since 2008, and we hire local, train apprentices into journeymen, and plan to be in town answering the phone in thirty years. When a Mr-Glass unit fails, we fix it right the first time, and we stand behind the work in writing with our Done Right Promise. We’re also authorized installers for PGT, CGI, CWS, and ES Windows, so if the time comes where replacement makes more sense than another repair, we can quote you side by side on paper and let you see the difference for yourself. A live person answers every call, 24 hours a day, seven days a week. That’s not a marketing line; it’s how we run the office.

FAQs