Therma-Tru Custom & Geometric Windows Nationwide | TruePane Windows & Doors

Therma-Tru Custom & Geometric Windows in Wellington: What to Know First

Custom and geometric Therma-Tru windows in Wellington run anywhere from $900 to $4,800 per unit installed, depending on the shape, size, and whether you’re ordering impact-rated glass. Most custom orders take three to six weeks from approved shop drawings to installation day, and we walk every Wellington customer through the exact line item before anything gets ordered. We’re an independent Therma-Tru service provider, not a factory-authorized dealer, which means we quote the brand side by side with PGT, CGI, CWS, and ES Windows so you see what you’re buying without a sales pitch attached. If you own a Therma-Tru window that’s fogged, sagging, or failed at the seal and you want it fixed or replaced with something that actually fits the opening, call (561) 349-4826.

Call (561) 349-4826

This page is written for Wellington homeowners who already have Therma-Tru products and are trying to figure out whether to repair, replace, or re-shape the opening. Dale Kessler and our crew have set and serviced enough Therma-Tru units in Palm Beach County to know which series hold up and which ones don’t. We’ll tell you straight.

Key Takeaways

• Custom geometric Therma-Tru windows in Wellington cost $900 to $4,800 per unit installed, with impact glass pushing the upper end.
• Therma-Tru hinge and seal failures are common in Wellington’s humidity, especially on units facing morning sun and afternoon storm exposure.
• OEM Therma-Tru parts carry longer lead times than quality aftermarket options, and we show you both on paper before ordering.
• TruePane registers both warranty layers in writing and backs every job with the Done Right Promise.
• Call (561) 349-4826 for a free estimate. A live person answers.

How Therma-Tru Products Fail - and How We Fix Them

Therma-Tru is better known for doors than windows, which means window owners in Wellington are often left dealing with subpar service from contractors who don’t understand the product line. We see the same failure patterns repeat across Paddock Park, Olympia, and The Landings. Here’s what actually goes wrong and what we do about it.

• Seal failure on Therma-Tru casement and awning windows. The insulated glass units on older Therma-Tru casements, particularly those installed before 2012, lose their argon fill and fog between the panes. In Wellington’s wet-dry cycle, this shows up as condensation you can’t wipe off. We replace the IGU to the exact original thickness and tint, not whatever the supply house has on the shelf.
• Hinge sag on heavy geometric units. Arched and oversized Therma-Tru awnings put constant torque on the hinge hardware. Once the sash drops even an eighth of an inch, the weatherstripping loses contact and you get air and water intrusion. We realign or replace the hinge system and reset the sash so it closes square against the frame.
• Warped vinyl frames on oversized openings. Therma-Tru vinyl windows in Wellington take a beating from the sun. Oversized openings, the kind you find in second-story bonus rooms and sunrooms, are where frames bow and crack. We square the rough opening, reinforce where needed, and set the new unit so it operates clean from day one.
• Fogged glass on decorative half-rounds and ellipticals. These shaped units are expensive to reorder and slow to arrive. The cause is usually the same: a failed perimeter seal from constant thermal expansion. TruePane sources replacement shaped glass through our network of Florida fabricators, which cuts the wait by weeks compared to waiting on a factory order.
• Hardware lock failure on Therma-Tru sliding windows. The latch mechanisms on certain Therma-Tru sliders wear down fast in coastal air. The window still opens, but it won’t lock securely. We swap in heavy-duty hardware that matches the existing screw pattern, so you’re not left with stripped-out holes or a patched frame.

Our Therma-Tru Custom & Geometric Windows Process

We’ve done enough Therma-Tru work in Wellington to know that rushing the measurement is the quickest way to a window that never seats right. Here’s how a job goes from first call to final walkthrough.

1. 1
   Measure and document. Every opening gets measured twice. We photograph the existing unit, note the rough opening dimensions, and check for square and level before anything gets ordered.
2. 2
   Parts and product decision. We lay out OEM Therma-Tru options next to quality aftermarket equivalents on paper, with lead times and prices for each. You decide what you’re paying for, and we register your choice in writing.
3. 3
   Shop drawings for custom shapes. Arched, radius, and geometric units require shop drawings before fabrication. We handle that coordination, and you approve the drawings before the order is placed.
4. 4
   Removal and dry-fit. The old unit comes out, we inspect the rough opening for rot or water damage, and the new window is dry-fit before any sealant goes down.
5. 5
   Set, seal, and trim. The unit goes in level and plumb, sealed against Florida wind and rain, with the interior trim restored clean. For impact installations, the anchoring follows Miami-Dade and Palm Beach County code.
6. 6
   Test and walkthrough. We open and close every sash, check the locking points, and run a water test where it matters. You sign off before we pack up, and the Done Right Promise covers what you can’t see yet.

What Therma-Tru Custom & Geometric Windows Costs in Wellington

Pricing in Wellington runs higher than some neighboring markets because of impact-code requirements and the labor involved in shaped openings. Here’s what we typically see:

What moves the price: impact-rated versus non-impact glass, the complexity of the shape, lead time on specialty fabrication, and whether the rough opening needs repair. We quote fixed pricing in writing, so the number on your estimate is the number on your invoice. Call (561) 349-4826 for a free estimate on your Therma-Tru custom window job in Wellington.

Why Wellington Homeowners Call TruePane Windows & Doors for Therma-Tru Work

We’re a second-generation glazier’s shop, not a franchise. Dale Kessler founded TruePane in 2008 and has spent years setting windows in Palm Beach County, and the rule on his whiteboard hasn’t changed: if the pane is not true, the job is not done. Every Therma-Tru repair or replacement we do gets the same treatment: both warranty layers registered in writing before the truck leaves, a Done Right Promise with no paperwork fights, and background-checked, uniformed technicians who show up when they say they will. If Therma-Tru isn’t the right product for your opening, we’ll quote PGT, CGI, CWS, or ES Windows side by side so you can compare what the manufacturer actually offers. We’ve been in Wellington long enough to know the houses, the HOA requirements, and the storm exposure. And we answer the phone 24/7. No voicemail tree.

FAQs

Ready to Get Your Therma-Tru Window Done Right?

Call (561) 349-4826 to schedule your free estimate. A live person answers, we’ll measure your openings, and you’ll get a written quote with fixed pricing, warranty details, and a straight answer on whether to repair or replace. TruePane Windows & Doors serves Wellington and the surrounding Palm Beach County communities. If the pane is not true, the job is not done.

Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Wellington and nearby areas.