Picture & Fixed Windows

Picture & Fixed Windows in Wellington, FL | TruePane Windows & Doors

Picture and fixed windows give Wellington homeowners the clean, uninterrupted sightlines that make a room feel twice its size. These are non-operable panels, meaning they don’t open, but they’re built with laminated impact glass and heavy-duty framing that stands up to Florida’s wind-driven debris season. We install them across PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, matched to your home’s elevation and exposure. If you’re planning a great-room remodel, a lakefront upgrade, or replacing a failed picture unit, call (561) 349-4826 and we’ll put together a fixed-window package that actually fits Wellington’s permitting and wind-load requirements.

Call (561) 349-4826

Product Overview - Picture & Fixed Windows

Picture windows are the workhorses of Florida’s modern home designs. They’re the wide glass panels that anchor a living room, the floor-to-ceiling units that frame a preserve view, and the transoms that pull daylight into a foyer. Because they don’t operate, the frame carries only the weight of the glass and the wind load, which means manufacturers can push the panel dimensions up to 120 inches wide without compromising structural integrity.

In hurricane-prone construction, fixed windows earn their keep in two ways. First, the laminated glass carries a PVB interlayer that holds the pane in the frame even if impact shatters it. Second, the non-operable design eliminates the weak points that come with sliding or swinging hardware. Water and air infiltration points drop dramatically when there’s no sash to seal around.

Architecturally, picture windows are rarely installed alone. The most common configuration we put into Wellington homes pairs a wide fixed panel with two operable units, typically casements or single hungs, on either side. That gives you the sprawling view without giving up cross-ventilation. We’ve done this in Olympia, the Equestrian Club, and plenty of the newer developments off South Shore Boulevard, and the combination works in both contemporary and transitional elevations.

Technical Specifications

Every picture window we quote is configured to your specific opening, exposure, and finish package. Here’s the range of what this product line supports:

• Frame materials: Aluminum or vinyl, depending on your elevation requirements and budget
• Maximum panel width: Up to 120 inches, engineered for the wind load on that opening
• Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, or clear glass
• Finish colors: White, almond, bronze, black, and tan
• Design pressure: Matched to your wind zone, up to +/-100, never higher than the configuration requires
• Compliance documents: Miami-Dade NOA and Florida Product Approval numbers available per configuration

Sizing is the single most important variable in a fixed-window order. A 120-inch panel on a low-profile wall uses a completely different frame profile than a 60-inch unit over a sliding door. We check the opening, the header, and the design pressure required before we ever quote a line item, because guessing at this product creates expensive problems down the road.

Hurricane & Compliance Performance

These are the six performance pillars this product is evaluated on for homes in Wellington. Each one matters for your permit, your insurance documentation, and how the window actually behaves during a storm.

Laminated Impact Glass - The core of every Impact Series fixed window we sell. A PVB (polyvinyl butyral) interlayer is bonded between two panes of glass. Under a large-missile hit, the glass may crack, but the interlayer holds the pane intact and keeps wind, rain, and debris from entering the home.

Miami-Dade NOA / Florida Product Approval - Each configuration carries a Notice of Acceptance or Florida Product Approval number issued for that specific size, frame, and glass combination. We provide the applicable approval documents with your quote so your permit package is complete before we file in Wellington.

FBC / HVHZ Compliance - The product is engineered to Florida Building Code High-Velocity Hurricane Zone requirements. HVHZ is the highest glazing standard in the state, and Wellington falls under its jurisdiction. That means anchor spacing, frame depth, and glass make-up all carry higher minimums.

TAS 201 / 202 / 203 Testing Context - HVHZ-rated products are tested under the TAS protocol family: TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. This is the testing language your municipality will look for when the permit reviewer opens your window schedule.

Design Pressure for Your Wind Zone - Design pressures are matched to your specific wind zone, up to +/-100, never higher. Over-engineering a window past what your elevation needs doesn’t make it safer; it makes it more expensive and harder to install well. We size to the number on your wind-load calculation, not to a marketing spec.

Energy Performance - Low-E and insulated glass options are available on every picture window in this series. For west-facing walls in Wellington, where afternoon sun loads climb fast, a Low-E insulated unit makes a real difference in interior comfort without changing the outward appearance of the glass.

Color & Glass Options

Wellington’s housing stock runs the gamut from equestrian estate to modern lakefront, so the right finish matters. White is the safest and most common choice for stucco exteriors, but it’s not the only one that works. Almond and tan read warm against beige and sand-toned facades, which dominate a lot of the communities off Greenbriar. Bronze and black perform well on more transitional and modern builds, especially when paired with darker roof lines or black-trimmed fascia.

Glass selection is a comfort decision more than an appearance one. Clear laminated glass maximizes natural light and is the standard baseline. Tinted glass cuts glare on walls that face the afternoon sun. Low-E insulated glass adds a thermal break between the two panes, which matters in rooms that run warm in the summer, and it also reduces interior condensation during Wellington’s humid October mornings. We’ll talk through what each option costs with you in the quote, and more importantly, which one fits the wall orientation and how you use the room.

Installation by TruePane Windows & Doors in Wellington

The best window in the world fails if it’s set poorly. We’ve replaced picture windows in Wellington that were only six years old, and the problem in nearly every case was water intrusion at the rough opening, not the product itself.

Our installation practice follows AAMA 2400 and 2410 standards. Every opening gets inspected before we start to verify that the beam and sill are sound. Once the debris is cleaned and the opening is flashed, we set the frame level, plumb, and square in every plane. If the frame is racked even a quarter-inch, a 120-inch fixed panel will fight you on the reveal line, and the sealant joint will flex every time the wind loads the glass.

Perimeter sealing uses AAMA 812 low-expansion foam sealant. The low-expansion spec matters on vinyl frames in particular, where a high-expansion foam can bow the extrusion and wreck the reveal months after the job is done. After the sealant cures, we run a water test on every fixed window installation, and we document the result. If a leak appears, it gets corrected before we clean up and leave. Period.

If your project is in an HVHZ jurisdiction, which Wellington is, the permit reviewer will ask for the product approval documents for the exact configurations we install. We prepare that package as part of the job. Improper installation also voids your ability to lean on the NOA rating if a window ever fails during a storm, so the installation quality is not a nice-to-have in this product category. It’s the thing that makes the compliance language actually apply to your home.

Frequently Asked Questions - Picture & Fixed Windows

Get a Quote - Picture & Fixed Windows in Wellington

Every picture window package we quote starts with the opening, not the product sheet. We measure the rough opening, verify the wind-load requirement, and put together a fixed-window solution with the right frame, glass, and finish for your Wellington home. Call (561) 349-4826 to schedule a free on-site measurement, and we’ll walk you through the exact product approval documents for your configuration before you sign anything.

Written by the team at TruePane Windows & Doors, serving Wellington, FL and surrounding communities with hurricane-impact window and door installation.