Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Royal Palm Beach
Door installation in Royal Palm Beach means something different here than it does a few miles west. The village sits inside Palm Beach County’s Wind-Borne Debris Region, which means any permitted door replacement has to carry a full impact rating, not just the glass panel. At TruePane Windows & Doors, our Door Installation team has been setting rated entry systems in Royal Palm Beach’s CBS ranch homes long enough to know which openings will need reframing and which ones won’t. If you’re replacing a door on a house built before the mid-1990s, call us at (561) 349-4826 to talk through what the permit actually requires before you buy anything.
Key takeaways for Royal Palm Beach homeowners:
- Any permitted door swap in Royal Palm Beach must be impact-rated per Palm Beach County wind-borne debris code, including the frame and hardware.
- A typical impact-rated entry door installation here runs $2,800-$5,500 depending on reframing scope and product line.
- Most 1978-1995 CBS ranch homes need either full frame replacement or rough-opening reframing, not a basic slab swap.
- We register both manufacturer warranty layers in writing before the truck leaves the driveway.
Why TruePane Windows & Doors Is Royal Palm Beach’s Preferred Door Installation Company
Dale Kessler founded TruePane in 2008 on a rule that still governs every install we do in Royal Palm Beach: if the pane is not true, the job is not done. That applies to doors as well as glass. We’ve spent years working on the village’s concrete-block-stucco homes, the ones built between 1978 and 1995, and we know what a wind-load inspection in Royal Palm Beach looks for. Our crew has pulled permits and passed first inspections on hundreds of openings in this village, so we’re not learning the local amendment process on your job.
Our technicians are background-checked, uniformed, and local. When they show up at a home off Royal Palm Beach Boulevard or near the Commons Park area, they carry manufacturer line cards for Marvin, Andersen, Pella, and Milgard so you can compare what you’re actually buying. We quote on paper, side by side, with no vague allowances. Royal Palm Beach homeowners who’ve worked with us know what that means: the price we quote is the price on the bill. No change orders appearing after the permit is pulled.
We’ve built our reputation in this village by treating every opening the way we’d treat one in our own mother’s house. That’s not a slogan. It’s the standard for how we flash a CBS wall, how we shim a jamb, and how we register both warranty layers before leaving your driveway.
Our Door Installation Services in Royal Palm Beach
Entry & Swing Doors
Replacing an entry door in Royal Palm Beach is rarely a one-for-one swap. The original units on homes built during the village’s late-1970s to mid-1990s boom are typically hollow-core or un-reinforced fiberglass with no impact rating whatsoever. They fail the wind-borne debris inspection the county mandates before you can close out a permit. We install impact-rated swing doors with fusion-welded frames, low-E insulated glass, and hardware rated to the same wind load as the panel, not a downgraded handle set that becomes the weak point in a storm. Most entry door replacements in Royal Palm Beach run $2,800-$4,600 depending on whether the rough opening needs reframing.
Double & French Doors
Double doors present a compounding wind-load problem in Royal Palm Beach. Where a single door has one active leaf and a solid jamb, a double unit has two active leaves and a center seam that has to resist a direct hit from wind-driven debris. Pre-1992 homes in the village frequently have French door frames that were never anchored to the CBS wall properly in the first place. We set rated double units with multi-point lock systems and continuous head and sill flashing. Expect a double or French door impact install in Royal Palm Beach to start around $4,200 and run up to $7,800 when the opening needs structural reframing.
Bifold & Folding Doors
Bifold and folding door systems in Royal Palm Beach are almost always upgrade projects, not repairs. Homeowners with pool or patio access want the opening, but Palm Beach County’s wind-borne debris designation applies to these units just like any other door. That means the panels, the track, the hardware, and the glass all have to carry a unified impact rating. We’ve installed folding systems from Marvin and Milgard in Royal Palm Beach backyards where the homeowner originally assumed they could use a non-rated unit because the door faced the pool. That will not pass inspection here. Budget $5,500-$9,000 for a rated bifold opening in this village.
Pivot Doors
Pivot doors are popular in Royal Palm Beach’s newer sections and golf-course communities, but they carry a specific set of requirements in a Wind-Borne Debris Region. The pivot hinge system has to be engineered for the full wind-load rating of the panel, and the slab itself has to be impact-rated glass or a rated solid core. We install pivot doors that meet Palm Beach County code without sacrificing the clean look the homeowner wanted in the first place. A rated pivot door install in Royal Palm Beach runs $4,800-$8,500 depending on slab size and hardware spec.
We also handle storm doors, which most Royal Palm Beach homeowners wrongly assume solve their impact problem, and arched and custom doors for the village’s older Mediterranean-style homes where a standard rectangular unit won’t fit the opening.
For a full look at what we install elsewhere, see our Door Installation in Royal Palm Beach breakdown or the service overview.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Royal Palm Beach
We are an authorized installer for more than a dozen manufacturer lines, including. That matters in Royal Palm Beach because not every manufacturer builds doors that meet Palm Beach County’s wind-borne debris standard across the full product line. We quote these brands side by side on paper so you can see the actual price difference between a Marvin impact-rated fiberglass door and an Andersen unit with the same wind-load rating. We keep common hardware, flashing, and sealant on hand for Royal Palm Beach jobs, which means fewer second trips and a faster turnaround when your existing door has failed and you need a rated replacement set before the next inspection cycle.
Common Door Installation Problems We See in Royal Palm Beach Homes
- Hollow-core doors cracking at the jamb under wind pressure. Original entry doors on Royal Palm Beach’s pre-1990 CBS homes were never built for hurricane-force wind loads. They split at the strike plate or hinge mortises, and a patch job won’t pass a wind-borne debris inspection.
- Seal-failed insulated glass fogging permanently. The village’s near-constant humidity and daily thermal cycling break down seals on pre-1995 door glass. Once the seal fails, the unit fogs permanently, and most original door glazing cannot be retrofitted with impact glass without replacing the entire frame and slab.
- Improperly flashed openings collecting wind-driven rain. CBS walls shed water differently than wood-frame walls. If the flashing tape and sill pan aren’t set correctly for a concrete block opening, summer squalls drive water behind the jamb, rot the subframe, and eventually void the impact rating where the jamb connects to the wall.
- Jalousie or louvered-glass doors that cannot be retrofitted. A notable share of pre-1990 Royal Palm Beach homes still have original jalousie or louvered door panels. These cannot be upgraded to meet wind-borne debris requirements under any circumstances. The opening needs full rough-opening reframing, which is carpentry work, not a simple door swap.
On a 1982 CBS ranch off Okeechobee Boulevard near Crestwood Middle, our crew removed a hollow-core front door with a warped jamb and failing seal. We set a Marvin impact-rated fiberglass door with low-E insulated glass, new flashing tape, and a fusion-welded frame. The permit passed first inspection, and the homeowner now has the wind-load documentation for insurance. That’s what a compliant install looks like in Royal Palm Beach.
Pricing for Door Installation in Royal Palm Beach, FL
Here’s what you should expect to pay for door installation in Royal Palm Beach, based on what we’ve quoted on village homes over the past few years. A standard impact-rated entry door swap runs $2,800-$4,600. A double or French door impact install runs $4,200-$7,800. A rated bifold or folding door runs $5,500-$9,000, and a pivot door runs $4,800-$8,500. The biggest variable is reframing. Homes built between 1978 and 1995 on CBS construction frequently need their rough openings rebuilt to accept modern impact-rated frames, and that adds $600-$1,800 depending on the opening. TruPane quotes the full scope on paper, including the reframing, flashing, permit, and inspection. We don’t quote the slab price and then add the frame work as a change order after demo. Call (561) 349-4826 for a free estimate on your specific opening.
Cost Breakdown for Royal Palm Beach Door Installations
- Impact-rated entry door (fiberglass, full frame): $2,800-$4,600
- Double or French impact door (rated frame and glazing): $4,200-$7,800
- Bifold or folding impact door: $5,500-$9,000
- Pivot door, impact-rated: $4,800-$8,500
- Rough-opening reframing (when required): $600-$1,800 per opening
- Permit and first inspection: Included in our written quote
We Also Serve Cities Near Royal Palm Beach
While this page is written for Royal Palm Beach homeowners, our crews serve the surrounding Palm Beach County communities as well. We install impact-rated doors in Wellington, Greenacres, Palm Beach Gardens, and West Palm Beach. Each carries different wind-load requirements, and Wellington homeowners should note that their code mandate differs from Royal Palm Beach’s. If you’re in one of these neighboring areas, call the same number: (561) 349-4826. Our team covers the full western Palm Beach County corridor.
Serving Royal Palm Beach, FL - Our Local Coverage Area
We’re based in the Royal Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Royal Palm Beach
A new entry door in Royal Palm Beach must be fully impact-rated to meet Palm Beach County’s Wind-Borne Debris Region requirements, which means the slab, frame, glazing, and hardware all carry a unified rating for the specific wind zone and exposure category assigned to your home’s location within the village. You cannot buy a non-rated door with impact glass added later. The rating is product-specific, not generic, and your permit application has to list the exact manufacturer and model being installed. Call (561) 349-4826 if you want us to pull the wind-load calcs for your specific house before you shop.
No. Original 1980s front doors on Royal Palm Beach CBS homes are typically hollow-core or un-reinforced fiberglass with no structural rating, so adding impact glass or a storm door does not satisfy the county’s wind-borne debris requirement. The permit inspection checks the frame anchoring to the CBS wall, the slab construction, and the hardware rating, none of which your original door can pass. The opening has to be replaced with a rated system, and in most cases that means full frame replacement rather than a slab swap. We quote the complete scope, not a partial fix that fails inspection.
After an impact door is installed in Royal Palm Beach, the opening must pass a county or village building inspection that verifies the product’s Florida Product Approval or Miami-Dade NOA documentation, the anchoring method to the CBS wall, the flashing and water-resistive barrier installation, and the hardware rating. The inspection is scheduled as part of the permit, and the inspector signs off before the permit can be closed. We handle all inspection paperwork and scheduling, and we bring the product approval documentation to the job so the inspector can reference it directly.
Replacing a non-impact entry door with a fully rated system can lower your windstorm insurance premium in Royal Palm Beach, but only if the installation is documented with a passed permit inspection and the product approval paperwork is filed with your insurer. The credit depends on your carrier, your policy, and whether the rest of your openings are rated, but the wind-load documentation we provide is the piece most homeowners are missing when they try to claim the discount. We give you the paper trail after every permitted install, and that’s what the insurance company needs to see.
Most 1980s CBS ranch homes in Royal Palm Beach need some level of rough-opening work when replacing an original door. The typical scope is resetting and re-anchoring the jamb to the block wall, which runs $600-$1,200, but if the original opening was framed for a hollow-core slab and a jalousie side panel, full rough-opening reframing can run up to $1,800. The carpentry is the part most online quotes omit. We price it from the start, so the permit inspection passes on the first visit and you’re not paying for a second appointment.
Contact TruePane Windows & Doors for Door Installation in Royal Palm Beach
If you’re replacing a door in Royal Palm Beach, start with a free estimate that shows the full scope, the wind-load rating, and the permit path. Call (561) 349-4826 and you’ll get a live person on the phone, not a voicemail tree. We’ll quote your opening on paper, register both manufacturer warranty layers before leaving your driveway, and stand behind the work with our Done Right Promise. A square deal, in writing. That’s how we’ve done it in Royal Palm Beach for years, and that’s how we’ll do it for you.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Royal Palm Beach and western Palm Beach County.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.