Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Westgate
Door installation in Westgate almost always means a full-frame, impact-rated tear-out, not a quick insert. That’s the reality of this neighborhood’s 1950s through 1970s CBS block homes, where original aluminum slabs have spent decades absorbing salt air and humidity. At TruePane Windows & Doors, we’ve handled enough Westgate permit inspections to know exactly what the Palm Beach County Building Division requires, and we spec every opening accordingly. Call (561) 349-4826 and we’ll walk you through what your door actually needs, in plain terms, before any work begins.
Why TruePane Windows & Doors Is Westgate’s Preferred Door Installation Company
We work in Westgate regularly, so we don’t guess at what’s behind the trim. We know the block construction, the rusted jamb anchors, the original rough openings that haven’t been touched since the Eisenhower era. That local familiarity saves Westgate homeowners from the most expensive discovery of all: pulling a permit and finding out the opening needs reframing to pass inspection.
Our teams are background-checked and uniformed, and every job runs on The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves your driveway. That’s not a courtesy. In Westgate’s salt-heavy air, your warranty is only as good as the registration behind it. We also back every door we install with our Done Right Promise. If it isn’t done right, we make it right. No paperwork fight, no arguing.
For many years, this company has operated on a rule Dale Kessler keeps on the whiteboard: if the pane is not true, the job is not done. That standard applies to every door we set in Westgate, from a simple swing door on a 1958 CBS rancher to a full impact-rated replacement on a rental property that hasn’t seen maintenance in twenty years. A live person answers our phone 24 hours a day, 7 days a week, because Westgate homeowners don’t schedule emergencies around business hours.
Our Door Installation Services in Westgate
Westgate’s housing stock dictates the scope of nearly every job we do here. Original openings are non-standard by today’s code, frames are corroded, and the county’s Wind-Borne Debris Region rules apply to every exterior door, whether the house is one block from the Intracoastal or five miles inland. Here are the services Westgate homeowners call us for most.
Entry & Swing Doors
Most entry doors in Westgate are original to the house, which means 50 to 70 years of salt air has been working on the hinges, threshold, and frame. We replace them with full-frame impact-rated units, spec’d with stainless steel hinges and hot-dip galvanized hardware so the new door doesn’t start corroding the same way the old one did. The permit goes through Palm Beach County Building Division, and we handle it from application to final inspection.
Impact-Rated Exterior Doors
Every exterior door we install in Westgate carries a Florida Product Approval for wind-borne debris. That’s not optional, and it’s not something a retrofit insert can satisfy. We quote impact-rated lines side by side on paper, including PGT and CGI, so you see exactly what you’re buying before you commit. Westgate’s designation under the Florida Building Code means your new front or rear door has to meet the same missile-impact standard as a coastal high-rise. We don’t cut that corner, and we won’t pretend an unrated door will pass.
Double & French Doors
French doors on a Westgate CBS home present a specific problem: the original opening was never framed for the sheer load a double-door system puts on the lintel. We reframe the rough opening to code, flash it properly with sealed joints, and set the new doors so they don’t bind in July humidity or leak during an afternoon squall. The same full-frame, impact-rated rule applies here. A French door without WBR rating is a hole in the building envelope during a storm.
Full-Frame Door Replacement
This is the standard job scope in Westgate, and it’s worth understanding why. An insert door sits inside the existing frame, leaving all the old corrosion, rot, and air leaks in place. A full-frame replacement tears everything out to the block and starts clean with flashing tape, sealed joints, and a new threshold. In Westgate’s humid, salt-driven environment, the insert is the cheap spec that fails inspection or rots within a decade. We recommend full-frame on nearly every 1950s and 1960s home we quote here.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Westgate
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Westgate homeowners we lean heavily on PGT, CGI, and ES Windows because their impact-rated door lines are engineered for South Florida’s wind and corrosion demands. We stock common hardware and replacement parts for these brands locally, which means a warranty part or service adjustment doesn’t wait on a regional warehouse. You get a written quote with models and ratings listed side by side, so there’s no question about what you’re paying for. And because we register both warranty layers in writing, the manufacturer’s coverage is actually there when you need it.
Common Door Installation Problems We See in Westgate Homes
We’ve set enough doors in Westgate to know the failure patterns before we open the first wall. Here’s what we routinely find:
- Corroded aluminum frames and jambs. Salt air working on unpainted or previously painted aluminum for 50 years leaves you with seized hinges, rotted jamb corners, and a slab that no longer seats in the frame. The only correct fix is a full-frame tear-out.
- Non-impact-rated doors without proper flashing. Westgate gets wind-driven rain during tropical squalls, and an unflashed, unsealed door lets that water run into the rough opening, warping the subfloor and rotting the framing behind the trim.
- Galvanic corrosion at the threshold. Standard steel hinges and fasteners sitting against an aluminum threshold in humid salt air create a corrosion cell. The door sags, air leaks in, and the lock starts misaligning. Stainless hardware is the only fix that lasts.
- Doors that bind seasonally. Concrete block homes in Westgate move with humidity, and a door set tight in January will often stick in August. We account for that expansion when we set the frame, not after the first heat wave.
Pricing for Door Installation in Westgate, FL
A full-frame impact-rated entry door in Westgate typically runs $3,200 to $6,800 installed, depending on the slab material, hardware spec, and whether the rough opening needs reframing. Double French doors with impact glass generally run $5,500 to $12,000 because the lintel work and structural reframing add real labor. An insert door might quote at $1,800 to $3,000, but in Westgate’s housing stock that insert frequently won’t pass Palm Beach County inspection and leaves decades of hidden frame damage behind it. The price gap between coastal-spec and inland-spec is real: stainless hardware, hot-dip galvanized fasteners, full flashing tape, and sealed joints add $400 to $900 to a job. Skip that spec and you’re paying for it again in ten years. Call (561) 349-4826 for a free, written, line-item estimate on your door. No change orders, no surprise line items later.
We Also Serve Cities Near Westgate
TruePane’s crews work across the western Palm Beach County corridor. If you’re outside Westgate, we also handle Door Installation in Wellington, Belle Glade, Loxahatchee Groves, and Westlake, with the same full-frame impact-rated standards and local permit handling. Westgate remains our core service area, but our trucks are on these roads weekly.
Serving Westgate, FL - Our Local Coverage Area
We’re based in the Westgate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Westgate
Westgate sits inside Palm Beach County’s designated Wind-Borne Debris Region under the Florida Building Code, and that designation applies to the entire unincorporated area, not just oceanfront property. Every replacement exterior door must meet Florida Product Approval impact-resistance standards or be paired with an approved secondary protection system. Because Westgate has no municipal building department, all permits run through Palm Beach County Building Division, and inspectors enforce the WBR requirement on every opening. Our crew pulled a permit on a Westgate rental near the historic Osborne neighborhood where the original slab had no impact rating at all. The swap to a full-frame impact-rated fiberglass door with stainless hardware passed first inspection. Call (561) 349-4826 if you want us to check whether your current door is code-compliant before you list or sell.
You can replace the front door independently, and the county will approve it as long as the new door itself meets WBR impact standards. The jalousie windows remain a separate code issue, but they don’t block a door permit. That said, jalousies are a red flag for Palm Beach County inspectors because they provide zero wind-borne debris protection, and they cannot be retrofitted into compliance. If you’re already pulling a permit for a full-frame door replacement, it’s worth having us look at the windows while the opening is exposed, since a whole-house opening project often becomes the more durable investment. The choice is yours, but we’ll quote both clearly. Call (561) 349-4826 for a free assessment.
Stainless steel hinges and hot-dip galvanized fasteners are the minimum standard for any exterior door in Westgate’s salt air. Standard interior hinges or zinc-plated screws against an aluminum threshold create galvanic corrosion that causes sagging, air leaks, and lock misalignment within a few years. We also spec stainless steel threshold screws and sealed hinge mortises to keep moisture from wicking into the frame. Our field crew replaced a corroded aluminum entry door in Westgate where salt air had seized the jamb hinges completely. The new fiberglass door with stainless hardware hasn’t moved since. Call (561) 349-4826 for a hardware spec on your specific door type.
A full-frame replacement runs roughly double the labor of an insert because we tear everything down to the block, reframe the rough opening to current code, install flashing tape and sealed joints, and set a new threshold before the door ever goes in. In Westgate’s 1950s to 1970s CBS homes, the original frames carry decades of hidden corrosion and moisture damage, and an insert simply covers that up. Palm Beach County inspectors can and do fail retrofit inserts on openings where the existing frame can’t be brought to WBR compliance. The full-frame job is the one that passes first inspection and gives you a door that doesn’t rot from the inside out. The cheap spec costs more within a decade, every time. Call (561) 349-4826 for a written estimate that shows both options side by side.
Run your hand along the bottom and sides of the closed door on a hot afternoon. If you feel air moving, see daylight through the gaps, or notice the door sticks in summer but closes fine in winter, the weatherstripping and likely the frame itself have failed. In Westgate’s humidity, compressed or cracked weatherstripping lets moist air into the rough opening year-round, and that’s what rots the framing behind the trim. A door that has lost its seal is also no longer doing its job during a tropical squall, when wind-driven rain finds every gap. If you’re unsure, call (561) 349-4826 and we’ll inspect it while we’re in the neighborhood, at no charge, before quoting any repair.
Call TruePane Windows & Doors for Door Installation in Westgate, FL
If you live in Westgate and your door is original to the house, plan for a full-frame, impact-rated replacement. Get it done right the first time, with hardware that survives salt air and a warranty that’s registered in writing. Call (561) 349-4826 to schedule your free, written estimate. A live person answers, 24/7.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving the Westgate community with the craft standard passed down through two generations of glaziers.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.