CWS Windows & Doors in Wellington, FL

CWS Windows & Doors in Wellington, FL | TruePane Windows & Doors

We service, repair, and replace CWS windows and doors throughout Wellington, from the original 1990s single-hungs in Olympia to the oversized impact sliders out on the equestrian estates. We’re an independent CWS service provider, not a manufacturer dealer or warranty arm, so we call repair-versus-replace straight. The one thing that makes our CWS work different here: we know which failure modes on Wellington’s pre-2002 CBS homes are actually repairable, and which ones mean the frame is done. Call (561) 349-4826 for a free estimate.

Call (561) 349-4826

Why Wellington Residents Choose Us for CWS Service

Dale Kessler grew up in Wellington’s Paddock Park neighborhood, back when half the houses his father drove past had aluminum jalousie windows that leaked every time a storm rolled in off the Everglades. That bothered him enough to make it his life’s work. He learned the trade at Palm Beach State College’s building construction program in Lake Worth, spent nights in the lab learning glazing tolerances, and has been setting and sealing windows in Palm Beach County for going on three decades.

Our crew works on CWS windows and doors in Wellington every week. We know the 400 Series single-hung that went into so many Versailles homes in the late 1990s. We know what happens to casement corners when irrigation overspray hits them month after month. And we stock the OEM-compatible parts that get your CWS units working again without waiting on a slow manufacturer pipeline. When you call, a live person answers. When we schedule, we show up.

Common CWS Windows & Doors Problems We Solve in Wellington

Here’s what we see most often on CWS products in this area, and what it takes to fix each one right:

• Failed IGUs (fogging) in original CWS 400 Series single-hungs from the 1990s. Wellington’s humidity plus two decades of thermal cycling means the sealed units in these windows eventually lose their inert gas and start hazing between the panes. We pull the sash, replace the IGU with an FL-approved impact glass unit, and upgrade the weatherstripping while it’s out.
• Corrosion at aluminum frame corners in casement windows. Wellington’s irrigation systems throw reclaimed water with a mineral load that eats at raw aluminum corners over time. If the corrosion is surface-level, we clean, seal, and reinforce. If it’s compromised the extrusion, we tell you plainly.
• Stripped operator gears in CWS 700 Series casement cranks. These crank mechanisms strip when the sash gets stiff from worn weatherstripping or slight frame settlement. Replacing the gear is quick; ignoring it means a window that won’t close tight against hurricane season.
• Warped or stuck panels in CWS impact sliders from post-Wilma retrofits. After Wilma’s 2005 track slammed western Palm Beach County, a wave of impact sliders went in fast. Many of those rollers and tracks are now wearing unevenly. We replace rollers, realign tracks, and get the panel gliding again.
• Drafty CWS 200 Series awnings with original glazing beads. The rubber glazing beads on these older awnings dry out and shrink in Wellington’s sun, letting air and rain find a gap. New equal-spec beads and a proper seal stop the draft.

CWS Service in Wellington: What Local Conditions Mean for Your Equipment

Here’s something most people don’t learn until they’re mid-quote: Wellington is not in the High Velocity Hurricane Zone. The HVHZ covers Miami-Dade and Broward counties with stricter product testing and more paperwork. Wellington sits in Palm Beach County’s wind-borne debris region, which means CWS impact windows and doors only need a Florida Product Approval number, not a Miami-Dade Notice of Acceptance. Practically speaking, that’s a 10 to 15 percent lower product cost than the same job on the coast. If a contractor tells you an NOA is required for a Wellington permit, they’re wrong, and you’re about to overpay.

For CWS owners specifically, this code distinction matters when you’re deciding between repair and replacement. A 1997 CWS 400 Series that needs a new IGU? Repair is usually the move if the frame is sound. But if that same frame has aluminum corrosion from irrigation overspray or warping from two decades of hurricane cycles, replacing the unit with a Florida Product Approval-rated CWS impact window is nearly always cheaper than repeated repairs. Dale’s rule applies: “If it’s not right on the paperwork, it won’t be right on the wall.”

CWS Models & Products We Service in Wellington

We work on the full CWS lineup that’s common in Wellington homes, including the 400 Series Single-Hung, 700 Series Casement, 200 Series Awning, and the 140-mph rated CWS Impact Sliding Glass Door. For structural components like balances and operators, we use CWS OEM parts when they’re available. For wear items like weatherstripping, glazing beads, and rollers, we source equal-spec aftermarket parts that meet Florida Product Approval standards. We keep the most common Wellington CWS parts on hand, which means most repairs finish in one visit. For the equestrian estates out in Palm Beach Polo and Mallet Hill, we also handle oversized impact sliders and custom barn-style openings that need commercial-grade sizing under residential HOA review.

CWS Service Pricing in Wellington

FAQs - CWS Windows & Doors in Wellington

Service Areas Near Wellington

Our crew serves Wellington and the surrounding communities of Royal Palm Beach and Palm Springs to the east, CWS service in Belle Glade to the west, and CWS service in Loxahatchee Groves and Westlake to the north. If you’re in any of these areas, the same crew that handles Wellington’s CWS work is available to you. Full details on our CWS sales & service coverage area are a call away.

Book Your CWS Service in Wellington Today

If your CWS windows or doors are fogged, sticking, or showing wear from Wellington’s sun and storms, call (561) 349-4826 to schedule a free estimate. We’ll send a background-checked, uniformed technician who will measure twice, quote on paper, and stand behind the work. Most CWS repairs finish in a single visit.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Wellington since 2008.