Simonton Door Installation Nationwide | TruePane Windows & Doors

Simonton Door Installation: The Wellington Owner’s Guide

Simonton door installation in Wellington typically runs $450 to $1,200 for a standard hinged patio or entry door, including parts and labor, and most replacements are completed in a single visit. That price covers removing the old slab, setting the new Simonton unit in the existing frame, shimming it true, and re-sealing the perimeter. The way most Wellington owners discover they need this work: a door that suddenly drags on the threshold in July, a lock that no longer lines up with the strike plate, or glass that’s started fogging between the panes after a decade of Florida sun and humidity.

Call (561) 349-4826

We stock Simonton-compatible replacement doors and hardware on our trucks because this is one of the most common calls we run in the western communities. If your Simonton door is failing, it’s usually not the whole unit. It’s the hinges sagging under the weight of an impact-rated panel, or the sweep gasket that’s turned brittle from afternoon sun exposure. The good news is that a properly set Simonton door in Wellington should give you 20 to 30 years. The bad news is that a misaligned one can tear through weatherstripping and warp the frame in under five.

Key takeaways:

• Installed replacement cost: $450 to $1,200, depending on panel size, glass package, and frame condition
• Most Simonton door swaps are done in one visit, usually in 2 to 4 hours
• We’re an independent installer, not affiliated with Simonton, and we register both manufacturer warranty layers in writing
• Same-week scheduling is standard for Wellington homeowners, with a live person on the phone 24/7 at (561) 349-4826

Which Simonton Models This Applies To

The Simonton line spans several series, and the door you have determines what we order, so it matters that we get this right the first time. In Wellington, we see three Simonton door types most often: the Reflections 5500 series on older homes, the Impressions 9800 series on newer construction and impact-rated retrofits, and the Madeira series on custom builds. Each series uses its own hinge geometry and sweep profile, which means a hinge from a 5500 will not sit flush on a 9800. We’ve seen that mistake made by other installers, and the door binds within six months.

To identify your model, look at the label on the edge of the door panel or the interior glass spacer. Simonton prints the series name and a manufacturing date code there. If the label’s worn off, we can match the hinge pattern and glass thickness to the right series. Our techs carry both OEM Simonton hardware and quality aftermarket equivalents. For hinges and rollers, the aftermarket parts from Caldwell and Truth hold up as well as OEM in Florida weather, and they cost about 20% less. For the door slab itself, we order OEM Simonton. There’s no aftermarket equivalent that matches the glass package and the frame tolerances the way the factory panel does.

One compatibility gotcha we run into regularly in Wellington: Simonton doors built before 2005 use a different threshold profile than later production. If you’re replacing just the panel and not the frame, the old threshold may not seal against the new sweep without a shim kit. We check for that on every estimate, because it’s the difference between a door that seals and one that leaks during summer downpours.

Signs Your Simonton Door Installation Is Failing

• Binding or dragging at the threshold. The hinges have stretched under the panel’s weight, and the slab is now sitting a quarter-inch lower than it was installed. In Wellington’s humidity, this is accelerated when the hinge screws were over-torqued at original installation and the wood around them has softened. We fix this by re-setting the hinges or, on badly worn units, replacing them outright.
• Condensation between the glass panes. This means the factory seal has failed. Simonton doors carry an insulated glass warranty, but it only pays out if the door was registered and the failure falls within the covered period. We handle that claim paperwork for you, and if the warranty’s expired, we replace the glass insert or the panel.
• Air leaking around the edges, especially on stormy afternoons. The weatherstripping has compressed or the door has shifted out of plane, leaving a gap you can see with a flashlight at night. A door out of true will let air in even when the sweep and gasket look fine.
• Lock that requires lifting or shoving the door to engage. The lock’s no longer aligned with the strike because the panel has moved in the frame. Forcing the lock just wears the mechanism and bends the hardware, and we see it often enough that we keep replacement Simonton multipoint locks on the truck.
• Sweep gasket crumbling or leaving black streaks on the threshold. This is UV and salt air degradation, plain and simple. The gasket’s a wear item in South Florida, and replacing it early keeps water out of the track and the subfloor.

Replacement Cost & What’s Included

In Wellington, a complete Simonton door installation runs $450 to $1,200, and here’s what drives the spread. A standard 36-by-80 hinged patio door with a clear glass insert sits at the low end. Impact-rated panels, Low-E glass packages, custom sizes, and doors wider than 36 inches sit at the higher end. If the frame itself is rotted or out of square, the job becomes a full-frame replacement rather than a slab swap, and that adds $300 to $600.

Our quote is a written, line-item price. Parts are listed separately from labor, so you see exactly what you’re paying for. There are no surprise line items when we start the work, and the price we quote is the price you pay. Every install is covered by our Done Right Promise, which means if the door is not true, we come back and make it right at no charge, no paperwork fights. We also register both manufacturer warranty layers in writing before the truck leaves your driveway, so the warranty actually exists when you need it.

Typical Simonton door installation pricing in Wellington:

• Standard hinged patio door, slab replacement: $450 to $700
• Impact-rated door, slab replacement: $650 to $1,000
• Full-frame replacement with new threshold: $900 to $1,200+
• Hardware-only repair (hinges, sweeps, multipoint lock): $120 to $350

DIY or Call Us?

There are a few things you can check yourself without touching a screwdriver: look along the top edge of the door with a level, shine a flashlight at night to spot gaps in the weatherstripping, and check the label to confirm your Simonton series. That’s information we’ll use on the phone, and it helps us bring the right parts on the first visit.

Where DIY goes wrong on Simonton doors is in the hinge re-setting and the panel alignment. A full impact-rated door panel in the larger sizes weighs well over 100 pounds, and when it comes off its hinges with momentum, it does not stop politely. The shimming and plane adjustment take experience to get right, and a door that’s off by a sixteenth of an inch will bind in one corner and leak in another. If the pane is not true, the job is not done, and that’s not a standard you hit by watching a weekend video. Call (561) 349-4826 and we’ll take it from there.

FAQs