Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterDouble & French Doors in Wellington, FL
Installing double or French doors in Wellington typically costs between $2,800 and $7,500, depending on the material, impact rating requirements for Florida building codes, and whether the existing frame needs structural adjustments. We handle the entire process from initial measurement to the final adjustment, ensuring every door we install meets the Keystone Standard. If you are looking for reliable service, call (561) 349-4826 for a free estimate.
When you live in Wellington, your home faces specific environmental challenges that make the quality of your Door Installation services critical. The combination of intense Florida sun, high humidity, and the occasional tropical storm puts immense pressure on exterior openings. We have seen too many homes where standard, off-the-shelf doors were installed without accounting for the way our local climate affects materials. At TruePane Windows & Doors, we believe that if the pane is not true, the job is not done. This is the founding rule that Dale Kessler established in 2008, and it remains the standard for every double and French door we install across the community.
Whether you are replacing an outdated sliding patio door or upgrading the entryway to your back patio, the choice of door affects your home’s energy efficiency, security, and curb appeal. We are an authorized installer for major manufacturers like. We bring these options to your home, provide side-by-side quotes on paper, and register both manufacturer warranty layers before our truck leaves your driveway. You can find more information about our broader services by visiting our Door Installation in Wellington page or returning to our home page to see our full scope of work.
When You Need Double & French Doors
Knowing when to repair a door and when to replace it is a skill that comes with years of experience. We do not push for a full replacement if a repair will suffice, but there are specific scenarios where a new double or French door installation is the only way to protect your home and restore its function.
- Persistent Binding and Misalignment: If you find yourself having to lift, pull, or force your doors to close, the frame has likely shifted. In many Wellington homes, the settling of the foundation or the expansion and contraction of materials due to humidity causes the door to go out of square. If the frame is compromised, a new door is often necessary to restore a proper seal.
- Fogged or Broken Seals: Double and French doors often feature glass lites. If you see condensation or a milky, fogged appearance between the panes, the insulated glass unit has failed. This ruins your energy efficiency and blocks your view, and in many cases, replacing the entire door unit is more cost-effective than attempting a specialized glass repair.
- Security Concerns: Older, hollow-core, or non-impact doors are vulnerable points in your home’s security. If your current doors do not have proper multi-point locking mechanisms or are made of flimsy materials, replacing them with modern, impact-rated French doors significantly hardens your home against intruders and storm debris.
- Drafts and Energy Loss: If you can feel air moving around the edges of your doors or notice a spike in your cooling bills, the weatherstripping has likely degraded beyond the point of simple maintenance. Modern doors from manufacturers like Pella or Andersen provide superior thermal breaks that keep Wellington’s heat outside where it belongs.
- Outdated Aesthetics: Sometimes, the reason is simply that the door no longer matches the home. Whether you are renovating your interior or want to improve the transition between your living area and your lanai, a new set of French doors can change the entire feel of a room.
- Rot and Termite Damage: Florida is tough on wood. If you notice soft spots at the base of your door frame or visible signs of termite activity, the structural integrity of the opening is at risk. We often replace these frames with modern, rot-resistant composite or fiberglass materials that stand up to our climate much better than traditional wood.
Our Double & French Doors Process
We do not believe in franchise playbooks or rushed installations. Our process is built on the reality that every home in Wellington is slightly different, and every opening requires a custom approach. We follow a strict methodology to ensure your new doors perform exactly as the manufacturer intended.
- The Initial Assessment: We start by listening to your goals. Are you focused on hurricane protection, energy efficiency, or aesthetics? We examine your existing opening, check for structural rot, and measure twice. Dale Kessler insists on this precision because it is the only way to ensure the door fits perfectly.
- Side-by-Side Quotes: We do not guess what you might like. We present physical, printed quotes for different manufacturer lines, such as Andersen, Pella, and Marvin. You see exactly what you are paying for, with no hidden fees or surprise line items. We believe in a square deal, where the price we quote is the price you pay.
- The Installation Day: Our technicians arrive on time, in uniform, and ready to work. We begin by carefully removing your old doors, taking care to minimize dust and disruption. We then inspect the rough opening to ensure the sub-structure is sound. If we find rot or framing issues, we address them immediately rather than covering them up.
- Setting the Frame: This is where the TruePane standard shines. We shim, level, and plumb the frame until it is perfectly square. A door that is not square will never close properly and will eventually fail. We secure the frame using the manufacturer’s recommended fasteners, ensuring the structural integrity matches local building codes.
- Finishing and Weatherproofing: We install the door panels, adjust the hinges for a smooth swing, and seal the entire perimeter with high-performance, exterior-grade caulking. We do not rely on “close enough.” We ensure the weatherstripping creates a tight, uniform seal against the frame.
- The Keystone Standard Registration: Before we leave, we register both the manufacturer’s warranty and our own workmanship guarantee. You receive the documentation in writing. We do not walk away until the job is done right.
Double & French Doors Pricing in Wellington
Pricing for door installation is rarely a flat rate because every home has different structural needs. However, we believe in transparency. When you call us for a free estimate, we provide an upfront price that covers the door, the labor, the removal of your old unit, and the cleanup. We never add surprise charges to the final bill.
The following table provides a general idea of the investment range for double and French door installations in the Wellington market:
| Project Type | Estimated Investment Range |
|---|---|
| Standard Fiberglass French Doors (Non-Impact) | $2,800 - $4,500 |
| Impact-Rated French Doors (High Performance) | $4,500 - $7,500+ |
| Custom Size / Structural Modification | $5,500 - $9,000+ |
| Multi-Slide or Folding Door Systems | $8,000 - $15,000+ |
Several factors will move your final price within or outside these ranges. The material is the biggest driver; fiberglass is generally more durable and cost-effective than wood, while impact-rated glass adds to the material cost due to the reinforced interlayers required by Florida code. If your opening needs to be resized-for instance, if you are replacing a smaller door with a larger set of French doors-this requires structural work, which adds to the labor time. We always provide a clear, itemized quote so you know exactly where your money is going.
If you are concerned about cost, remember that we offer a permanent 5% discount for seniors and veterans, and we have free, written repair estimates. We are here to help you make an informed decision that fits your budget and your home’s needs. Call (561) 349-4826 to schedule your estimate.
FAQs - Double & French Doors
Is it cheaper to repair my existing French doors or replace them entirely?
It depends on the nature of the problem. If the issue is minor, such as worn weatherstripping, a loose hinge, or a simple hardware failure, a repair is often the most cost-effective solution. However, if the wood is rotting, the glass seal has failed, or the door frame has settled to the point where it binds constantly, a repair is often a temporary fix that will cost more in the long run. We always assess the root cause; if we believe a repair will give you another five to ten years of life, we will tell you that. If the structure is compromised, we will recommend replacement and explain why. Call (561) 349-4826 for an honest assessment.
How long does the installation of new double or French doors take?
Most standard double and French door installations are completed in a single visit. We arrive, remove your old door, prep the opening, install the new unit, and finish the trim in one day. If the project involves structural modifications-such as widening an opening or addressing significant rot-it may take a second day, but we will always communicate the timeline clearly before we start. We respect your time and aim to minimize the disruption to your home.
Are your French doors impact-rated for Wellington storms?
Yes, we offer a wide range of impact-rated Entry & Swing Doors that meet and exceed Florida building codes. These doors are designed to withstand high-velocity debris and extreme wind pressure, which is essential for any home in our area. During your consultation, we can show you the specific impact ratings of different manufacturers like PGT and CGI, and help you choose the level of protection that makes sense for your property. We never install non-impact doors in areas where impact protection is required by code.
Can you match the style of my existing doors or trim?
We work with a variety of manufacturers, including Andersen, Pella, and Marvin, to provide a wide range of styles, finishes, and hardware options. Whether you have a modern home that needs clean, sleek lines or a traditional home that requires specific grille patterns and wood grain finishes, we can almost certainly find a match. We bring samples and brochures to your home so you can see the materials and finishes in your own lighting before you make a decision.
Understanding Materials and Manufacturers
The longevity of your doors depends heavily on the materials used. In Wellington, we deal with high heat and humidity, which can wreak havoc on lesser-quality products. We generally recommend fiberglass for exterior French doors. Fiberglass does not warp, rot, or expand in the heat the way wood does, and it can be finished to look exactly like wood. It offers the best balance of durability, energy efficiency, and aesthetic appeal.
We also install Pivot Doors and steel doors for those who prioritize security, though steel can be prone to denting and rust in our coastal environment if not properly maintained. Aluminum frames are another common choice, particularly for impact-rated doors, as they offer excellent strength-to-weight ratios and can be powder-coated for long-lasting finish retention.
When it comes to the glass, the options are just as important. All our installations prioritize energy efficiency. We use dual-pane glass with Low-E coatings that reflect heat away from your home, keeping your interior cooler and reducing the load on your HVAC system. If you live in an area prone to high wind, we install laminated impact glass and Storm Doors. This glass features a tough, transparent interlayer that holds the glass together even if it is shattered, preventing the “pressure blow-out” that can lead to roof failure during a storm.
Our relationships with manufacturers like Andersen, Pella, and Marvin are built on years of trust. These companies stand behind their products, and we stand behind our installation. If a manufacturer warranty issue does arise, we do not leave you to fight it on your own. We handle the warranty process as part of our service, because that is what a professional glazier does.
Safety and Structural Integrity
French doors are heavy. A set of impact-rated double doors can weigh several hundred pounds. This is not a project for a weekend DIY enthusiast. Improper installation can lead to more than just a door that doesn’t close; it can result in the door falling out of the frame, glass breakage, or injury. The structural integrity of the rough opening-the wooden framing hidden behind your drywall-must be inspected and potentially reinforced to support the weight of a heavy, modern door system.
We have seen doors installed by unlicensed handymen that were not properly anchored to the building structure, leaving them essentially “floating” in the opening. This is a significant safety hazard during a storm. Our technicians are trained to anchor doors according to the strict specifications required by the Florida Building Code, ensuring that the door is a structural part of your home, not just an insert. When you work with us, you are getting the peace of mind that comes from knowing the job was done to the highest safety standard, by a team that works in your home the way they would work in their own mother’s.
We are here to answer your questions and help you secure your home with doors that are built to last. Whether you are ready to start a project or just want to know what your options are, we are happy to talk. Call (561) 349-4826 to speak with a member of our team and schedule your free estimate. We are proud to serve Wellington, and we look forward to the opportunity to earn your business.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Wellington.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.