Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterAndersen Custom Windows & Doors in Wellington: What to Know First
Andersen custom windows and doors in Wellington run between $900 and $3,200 per opening installed, depending on the series, glass package, and whether the unit is impact-rated for Palm Beach County code. We’re an independent service provider, not a factory-authorized dealer, which means we quote the work straight and warranty it ourselves under the Done Right Promise. Most custom Andersen jobs we handle in Wellington take two to four weeks from measurement to install, with the actual installation completed in one or two visits. If you own an Andersen window or door that’s binding, fogging, or failing to seal against the humidity that rolls in off the Everglades, call (561) 349-4826 and a live person will pick up.
This page is written for Wellington homeowners who already have Andersen products in their home and need straight answers about repairing, replacing, or upgrading them. No fluff, no pressure, just what we’ve learned from servicing these units in Palm Beach County for the better part of thirty years.
How Andersen Products Fail - and How We Fix Them
Andersen makes a solid window. But every product has weak points, and in Wellington’s heat and moisture, certain failure patterns show up more often than others. Here’s what we see on custom Andersen work:
- Andersen 400 Series casement operators bind and strip. The crank mechanism on 400 Series casements uses a worm gear that wears down faster in humid, salty air. By year ten, homeowners in Wellington neighborhoods like Olympia and The Isles tell us the crank spins but the sash barely moves. We replace the operator assembly with the correct OEM part and reset the sash alignment so the new gear isn’t fighting the track.
- Andersen Frenchwood hinged doors sag at the active panel. Florida heat softens the factory sealant around the perimeter of the hinge stile, and the weight of the panel slowly pulls it down and in. You’ll notice the door scrapes the threshold on the strike side. We pull the panel, rehang it square, and reseal the perimeter the way it should have been from the start.
- Andersen 200 Series gliding doors accumulate sand and grit in the track. Wellington sits on sand and limestone, and that grit works its way into the rollers. The result is a door that starts smooth and ends up feeling like it’s rolling over gravel. We pull the panel, clean the track, replace worn rollers, and adjust the height so the door carries on the bearings instead of the track itself.
- Architectural grilles and SDLs rattle loose. Simulated divided lites are attached to the interior glass surface with a pressure fit. After years of expansion and contraction, the clips lose tension and the grilles rattle when a door slams or a storm rolls through. We reglaze the grille bars with the proper spacing and tension so they sit tight and quiet.
- Oversized custom Andersen picture windows lose their seal in direct sun. A south-facing oversized panel in Wellington absorbs brutal afternoon heat. The insulated glass unit expands, the seal flexes, and eventually the glass fogs. We quote replacement IGUs with the correct spacer and gas fill for the exposure, then set the new unit with fresh glazing that can handle the expansion cycle.
Our Andersen Custom Windows & Doors Process
Here’s how an Andersen job runs with us, start to finish:
- 1
You call (561) 349-4826. A live person answers. We schedule a time to come out, usually within the week, and we show up when we say we will.
- 2
We measure every opening twice. The technician confirms the exact dimensions of each window or door, checks the square of the rough opening, and notes the exposure - east, west, south, or shaded. Andersen units are built to order, so a wrong measurement is a five-week mistake.
- 3
We show you the quote on paper, line by line. OEM parts where they matter, quality aftermarket where they don’t, and the exact Andersen series we’re recommending. You see both warranty layers on the estimate, stated in writing, before you sign anything.
- 4
We order and schedule. Custom Andersen units come from the factory with a two-to-four-week lead. We’ll register both warranty layers when the order is placed and confirm the date the moment it ships.
- 5
We install and clean up. Uniformed, background-checked technicians set the unit, shim it true, seal the perimeter, and clean the opening. If the pane is not true, the job is not done.
- 6
We stand behind it for 90 days. If something’s not right, we come back and make it right. No paperwork fight, no arguing.
What Andersen Custom Windows & Doors Costs in Wellington
Straight numbers for Wellington, based on what we’ve quoted over the last few years:
- Andersen 200 Series gliding door (standard size): $1,800-$2,800 installed
- Andersen 400 Series casement window with impact glass: $1,100-$1,900 per window
- Oversized Andersen picture window with grilles: $2,200-$3,200 installed
- Custom shape (arch, circle, triangle) Andersen window: $1,500-$2,900 depending on radius and glass package
- Andersen Frenchwood hinged door replacement: $2,500-$4,000 installed
What moves the price: impact versus non-impact glass, the size of the unit, the condition of the existing rough opening, and whether we’re matching an Andersen series that’s still in production or sourcing a discontinued line. Every one of these jobs starts with a free estimate. Call (561) 349-4826 and we’ll come measure the openings, put the quote in writing, and let you compare line by line.
Why Wellington Homeowners Call TruePane Windows & Doors for Andersen Work
We’ve been in Palm Beach County since long before “impact-rated” became a code requirement. Dale Kessler grew up in Wellington’s Paddock Park neighborhood watching those old aluminum jalousie windows leak every time a storm moved in off the Everglades, and he’s spent the decades since measuring, setting, and sealing windows and doors across this county. That’s why we treat an Andersen install the way we’d treat work in our own mother’s house: we measure twice, we quote both warranty layers side by side on paper, we register everything before the truck leaves the driveway, and we back it with the Done Right Promise. If the pane is not true, the job is not done.
We also carry more than a dozen manufacturer lines, so when a homeowner needs a side-by-side comparison, we’ll quote Andersen next to Pella, PGT, and CGI on the same sheet of paper. No pressure. You see exactly what you’re buying, and we stand behind whichever one you pick.
FAQs
Yes. We’re an independent Andersen service provider, and that independence means we quote repairs based on what’s actually wrong, not what the factory says we should charge. We use OEM Andersen parts where they matter for fit and finish, and we stand behind our work with the Done Right Promise. Call (561) 349-4826 for a straight answer about your specific unit.
It can if you don’t match the series and the glass. We match the Andersen line you already have - 200, 400, A-Series, E-Series - and match the exterior color, grille pattern, and glass tint so the replacement sits naturally next to its neighbors. We’ll show you the spec sheet before ordering. Call (561) 349-4826 and we’ll walk the house and point out exactly what matches and what doesn’t.
If the panel itself is sound, repairing the operator, rollers, or weatherstripping usually runs $250 to $600, far less than a $2,500+ replacement. If the frame has rot or the insulated glass has failed, replacement is the better call. We’ll tell you which one applies to your door and quote both options without pushing either. Call (561) 349-4826 for a free estimate and an honest recommendation.
Standard-size Andersen units with no custom options typically arrive in two weeks. Custom shapes, unusual sizes, or special glass packages can run four weeks. Installation itself is usually done in one day per opening, and we’ll schedule when the units arrive so you’re not living with an open hole in the wall. Call (561) 349-4826 and we’ll give you a firm date, not a window.
Andersen’s factory warranty covers the glass and the hardware for a stated duration depending on the series. Our Done Right Promise covers the labor and the install. Under The Keystone Standard, we register both warranty layers in writing before the truck leaves your driveway. If it’s not right on the paperwork, it won’t be right on the wall. Call (561) 349-4826 and we’ll explain what applies to your specific units.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Wellington and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.