Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Why Wellington Homeowners Choose Andersen Windows & Doors
TruePane Windows & Doors provides independent Andersen windows and doors repair, service, and replacement throughout Wellington, FL. We work on the full Andersen lineup, from 200 Series Narroline sliders to 400 Series Woodwright double-hungs, and we quote repairs and replacements the same way we’ve done for years: on paper, side by side, with both warranty layers registered before we leave the driveway. We are not an Andersen-authorized dealer or service center. What we are is a local Wellington company with years of community roots and the bench experience to fix Andersen products the way the manufacturer intended. If you need Andersen service in Wellington, call (561) 349-4826 and a live person will answer.
Why Trust TruePane Windows & Doors for Your Andersen Windows & Doors?
Our technicians have rebuilt Andersen sashes from the Narroline and 400 Series eras, and we know which glazing beads, balances, and weatherstripping those frames actually need. That kind of knowledge only comes from working on hundreds of them in South Florida’s humidity, where a wrong spring tension or an ill-fitting clip shows up within a season. Dale Kessler grew up in Wellington’s Paddock Park neighborhood, where half the houses his father drove past had aluminum jalousie windows that leaked every time a storm rolled in off the Everglades. He made fixing out-of-true installs and voided warranties his life’s work, and that founding rule still stands on the whiteboard: if the pane is not true, the job is not done.
Every technician who walks your Wellington property is background-checked, uniformed, and trained on Andersen-specific hardware. We measure every opening twice. We register both manufacturer warranty layers in writing before the truck pulls away. And if something is not done right, the Done Right Promise means we make it right. No paperwork fights, no arguing.
Common Andersen Windows & Doors Problems We Fix in Wellington
Andersen makes a good window. Wellington’s climate makes it work for a living. Here are the failure modes we see most often on Andersen products in this part of Palm Beach County, and what causes them:
- Fogged or cracked insulated glass in 200 Series Narroline sliders. The original low-E IG units in Narroline sliders fail after years of thermal cycling between Wellington’s afternoon heat and air-conditioned interiors. Once the seal goes, moisture creeps between the panes and the fog will not wipe off. The fix is replacing the IG unit, not the whole window, and we do that repair regularly.
- Sagging or seized double-hung sash balances in 400 Series Woodwright windows. The balance springs in Woodwright double-hungs lose tension over time, especially in homes where windows face west and get hammered by the afternoon sun. A window that slams shut or will not stay open is usually a balance problem, and Andersen-specific balances with the correct clip profile will fix it.
- Rotted wood on A-Series casement frames. A-Series casements are beautiful windows, but if the exterior seal was not maintained or the original install allowed water to sit against the frame, Wellington’s rainy season will find its way in. We repair sashes and frames where rot is localized, and we will tell you honestly when a full-frame replacement is the smarter move.
- Warped vinyl cladding on E-Series windows. E-Series windows carry a lot of vinyl cladding, and south-facing exposures in Wellington get brutal sun. Over time, cladding can warp or separate from the frame. This is often cosmetic, but it can compromise the weather seal, so we inspect the full opening before recommending a repair.
- Grinding or binding patio door rollers on Andersen gliders. Wellington’s sandy soil and landscape dust work their way into roller tracks. The door gets harder to slide, then it grinds, then someone yanks it and bends the track. We replace rollers with Andersen-matched profiles and reset the track so the door glides with one hand again.
Our crew recently restored a 200 Series Narroline slider in a Wellington condo where the original low-E glass had failed, leaving a permanent fog between the panes. We removed the sash, replaced the insulated glass unit with an Andersen-certified IG, and reset the rollers so the door glided instead of grinding. The owner now has a clear view of the lake and a window that opens with one hand.
Andersen Parts & Our Repair-vs-Replace Approach
We use genuine Andersen replacement parts where they matter: sash balances, weatherstripping, and hardware. Aftermarket parts often have wrong spring tensions or clip profiles that will fail early or damage the frame. For obsolete or discontinued components, we source quality aftermarket equivalents and always explain the trade-off before ordering. You will know exactly what part goes in, what it costs, and why we chose it.
When repair is a bad investment, we say so. A 35-year-old Andersen window with a rotted frame, failed glass, and seized hardware is a candidate for replacement, not patchwork. We walk through both options with written pricing, and the decision is yours. Call (561) 349-4826 for a free estimate on your Andersen repair or replacement in Wellington.
Our Andersen Service Process - Step by Step
- 1
Diagnosis. We inspect the window or door in place. We check the sash, balances, weatherstripping, frame condition, and how the unit sits in the opening. For Andersen products, we identify the exact model line and hardware generation before recommending anything.
- 2
Estimate. We put the repair or replacement scope on paper. If it’s a repair, you get part numbers and labor. If it’s a replacement, we quote Andersen lines side by side with comparable PGT, CGI, or Pella products so you can see the difference in writing.
- 3
Repair or install. We use Andersen-specific parts and glazing beads, set the unit with the correct clearances, and flash the opening for Wellington’s rainfall loads. If the opening is out of square, we correct the framing before we set the window. If the pane is not true, the job is not done.
- 4
Test. We operate the sash, door, or window through a full cycle. We check for air infiltration, binding, and seal contact. We confirm the lock engages and the balance holds.
- 5
Warranty registration. Before the truck leaves your driveway, both manufacturer warranty layers are registered in writing. You get the durations in writing, and you get our Done Right Promise on the workmanship.
Andersen Products We Service & Install in Wellington
We service and install the Andersen lines most common in Wellington homes: 400 Series Woodwright double-hungs and casements, 200 Series Narroline sliders and picture windows, A-Series casements and awnings, and E-Series custom windows and doors. We also work on Andersen patio doors and French doors where the frames and rollers need service or the glass has failed. Common Andersen replacement parts and IG units are stocked locally for faster turnaround, and we can order Andersen-specific hardware directly when the job requires it. If you are considering hurricane impact upgrades, full frame replacement, or an energy-efficient upgrade to your existing Andersen windows, call (561) 349-4826 and we will walk you through the options that pass Palm Beach County code without overpaying for NOA products you do not need in Wellington, which is not in the HVHZ.
We Also Service These Brands
Andersen is a significant part of what we repair, but we are not married to one manufacturer. We service and install Pella, PGT, and CGI products as well, and we quote manufacturer lines side by side so you can compare what you are actually buying. A good window is a good window. The install is what separates a ten-year unit from a thirty-year unit.
FAQs - Andersen Windows & Doors Service in Wellington
Yes, most Narroline fogging is repaired by replacing the insulated glass unit, not the entire window. The seal on the original IG unit fails over time, and Wellington’s humidity pushes moisture between the panes. We remove the sash, install a new Andersen-certified IG, and reset the window. Call (561) 349-4826 for an inspection and a written quote.
It is almost always the sash balance, and yes, it can be repaired. Andersen double-hungs use spring balances with specific clip profiles, and aftermarket springs with the wrong tension will not hold the sash properly. We use genuine Andersen balances matched to your window’s weight class and get the sash operating like new.
You can upgrade the glass to impact-rated laminated insulating glass in many Andersen A-Series frames, but the frame and mounting must also meet Florida Product Approval for wind load. We inspect the frame and tell you honestly whether upgrading glass is code-compliant or whether a full impact window replacement is the only legal path. Either way, we handle the permit and the inspection.
Andersen warranties are tied to the product and often transfer to subsequent owners. We can help you locate the serial numbers etched on the glass or stamped on the frame and walk you through what the warranty covers. As an independent Andersen service provider, we are not authorized by Andersen, but we know where to find the information and how to file a claim so you don’t lose a valid warranty.
No. We are an independent Andersen service and installation company in Wellington. That means we work for you, not the manufacturer, and we quote repairs and replacements without any brand loyalty. It also means we can tell you plainly when a different manufacturer’s product would serve your home better.
Water intrusion through failed caulking or improper flashing is the usual culprit, and Wellington’s summer rains keep the wood wet long enough for rot to set in. If the rot is localized to the sash, we can often repair or replace just that sash. If the frame is compromised, we will show you the damage and recommend a full-frame repair or replacement. Get an exact quote by calling (561) 349-4826; estimates are free.
Most Andersen repairs in Wellington run between $180 and $650 depending on the part and the labor involved. A sash balance replacement on a 400 Series double-hung typically lands in the $200 to $300 range. An IG replacement on a Narroline slider runs $300 to $550. Full window replacement depends on size, line, and impact requirements. Call (561) 349-4826 for an exact quote; estimates are free, and the price we quote is the price you pay.
Book Your Andersen Service in Wellington, FL
If your Andersen windows are fogged, binding, sagging, or leaking, call (561) 349-4826. We will schedule a time, show up when we say, and give you a written estimate before any work begins. TruePane Windows & Doors serves Wellington and all of Palm Beach County with independent Andersen service backed by the Keystone Standard and the Done Right Promise. “If it’s not right on the paperwork, it won’t be right on the wall.”
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Wellington since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After