Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterECO Window Systems Custom & Geometric Windows in Wellington: What to Know First
ECO Window Systems custom and geometric windows in Wellington can be serviced by our team at TruePane Windows & Doors, an independent ECO Window Systems service provider. Most repair jobs on shaped, arched, and oversized ECO units take one visit, and you’ll get a written quote before any work begins. We’re not the cheapest bid in Wellington, but the job gets done right the first time, and both warranty layers get registered in writing before our truck leaves your driveway. If you own a home with ECO custom windows that are binding, leaking, or fogging, call (561) 349-4826 and a live person answers.
How ECO Window Systems Products Fail - and How We Fix Them
ECO Window Systems builds a solid product, but Wellington’s climate has a way of finding every weak point in a window. Dale Kessler has been setting and sealing glass in Palm Beach County for going on three decades, and these are the failure modes we see most on ECO custom and geometric units:
- Arched window seal blowout on the ECO Arched Series. Wellington’s afternoon thunderstorms push water against the top radius of an arched unit harder than any square window. The seal at the apex of the arch is where the glass and frame flex differently, and after eight to ten seasons the fog starts creeping in from the top center. We reglaze the unit, replace the failed IGU, and reseat the arch with a heavier bead than the factory used.
- Trapezoid and rake window binding from slab settlement. Wellington sits on a mix of sandy soil and muck, and houses move. When the slab shifts even a quarter inch, angled ECO geometric windows start binding at the bottom corner because the frame was designed to sit perfectly square. We don’t just force the sash; we reset the frame, shim it to true, and re-flash the opening so it drains the way it should.
- Oversized picture window deflection on ECO fixed units over five feet wide. The bigger the pane, the more it flexes in a 140 mph wind gust. We see oversized ECO fixed windows with hairline cracks radiating from the corner blocks because the original install didn’t account for Wellington’s exposure. The fix is a thicker lite, properly bedded, and in some cases adding mid-span support to the frame.
- Hardware fatigue on ECO casement and awning geometric units. Crank mechanisms on shaped windows wear out faster than sliding hardware because the load is uneven. We replace the operator arms and hinge sets with parts that match or exceed the OEM spec, and we adjust the sash so it seats evenly on the weatherstrip instead of chewing it up at one end. This is a repair we do in one visit most of the time.
- Weep system blockage in ECO circle-top and half-round windows. Wellington gets 60-plus inches of rain a year, and any shaped window that doesn’t drain properly will rot the frame from the inside out. The factory weep holes on some ECO circle-tops are undersized for our rainfall, so we open them up, add secondary drainage, and re-screen them before resetting the glass.
Our ECO Window Systems Custom & Geometric Windows Process
We treat every ECO job like the window has to perform for another twenty years. Here’s how a typical repair or replacement goes from your first call to our final walkthrough:
- 1
You call (561) 349-4826. A live person answers, we ask about the window, and we schedule a time that works for you. No voicemail tree.
- 2
We measure and diagnose on site. Our technician checks the opening, the reveal, the level, and the glazing condition. Every measurement is taken twice. We look for the root cause, not just the symptom you’re seeing.
- 3
We give you a written quote with options. If a part can be OEM, we price it. If a quality aftermarket part will last longer for less, we show you both on paper. You decide with the numbers in front of you.
- 4
We do the work. The old unit comes out carefully, the opening gets corrected if needed, and the new or repaired window goes in true. We flash it, seal it, and bed the glass properly for Wellington’s wind and water loads.
- 5
We test the window in front of you. Open, close, lock, drain-test. If the pane is not true, the job is not done.
- 6
We register both warranty layers before we leave. Manufacturer warranty and our Done Right Promise - in writing, durations stated, no paperwork fights later. We stand behind it.
What ECO Window Systems Custom & Geometric Windows Costs in Wellington
Here are the price ranges we typically see for ECO custom and geometric window work in Wellington:
- Arch or circle-top seal replacement: $380-$720, depending on glass size and whether the IGU needs full replacement.
- Trapezoid or rake window binding repair: $290-$550, including frame re-shimming and weatherstrip replacement.
- Oversized fixed window reglaze (over 5 feet wide): $600-$1,100, thicker lite and proper bedding included.
- Casement or awning hardware replacement on a geometric unit: $240-$460 with operator arms and hinge sets.
- Full custom ECO replacement window (shaped, impact-rated): $1,400-$3,800 installed, depending on size, geometry, and glass package.
What moves the price: the size of the lite, whether the unit is impact-rated, how much the opening has shifted out of square, and whether we’re repairing the existing frame or replacing the whole assembly. You’ll know the exact number before we start. Call (561) 349-4826 for a free estimate on your ECO window, and we’ll put it in writing.
Why Wellington Homeowners Call TruePane Windows & Doors for ECO Window Systems Work
We’ve been serving Wellington and Palm Beach County since 2008 in the glass trade, and this is a company that plans to be here in thirty more. Dale Kessler founded TruePane in 2008 to fix the two problems he saw on every bad install: out-of-true windows and warranties that vanished when you needed them. Every job carries the Done Right Promise. If it’s not done right, we make it right - no arguing, no fine print.
Our technicians are background-checked, uniformed, and trained on more than a dozen manufacturer lines including ECO, PGT, CGI, CWS, and ES Windows. If your ECO unit can’t be saved and you need a full replacement, we can quote you side by side on paper so you see exactly what you’re buying. We’re an independent ECO Window Systems service provider, which means our loyalty is to you and the window’s long-term performance - not to a manufacturer’s sales target.
FAQs
Yes, in most cases. The fog means the insulated glass unit has lost its seal. We replace the IGU, reseat the arch properly, and register the warranty in writing before we leave. Call (561) 349-4826 and we’ll tell you if your specific unit is repairable during the estimate.
When OEM parts are available and make sense, we use them. If a quality aftermarket part will hold up better in Wellington’s climate or save you real money, we show you both options on paper before you decide. Either way, the repair is covered by our Done Right Promise.
Most repairs are completed in a single visit, usually within two to four hours depending on the unit’s size and the extent of the damage. Full custom replacements with impact glass can take two to three weeks from order to installation because the unit is built to spec.
If the frame is still sound and square, repair usually makes sense. If the frame has rot, deflection, or the opening has shifted significantly, replacement is the honest answer. We’ll tell you straight which one we’d do on our own mother’s house, and we’ll put the numbers in writing either way.
Yes, when the job requires one. Wellington and Palm Beach County have specific permit requirements for window replacement, especially impact-rated units. We handle the permit paperwork, schedule the inspection, and make sure the job passes before we call it done. Call (561) 349-4826 for a free estimate and we’ll verify what your specific project needs.
Get Your ECO Custom or Geometric Window Done Right
If your ECO Window Systems arched, shaped, or oversized window is giving you trouble, don’t wait for a fogged seal to become a rotted frame. Call (561) 349-4826 and a live person answers - 24 hours a day, 7 days a week. We’ll schedule a free estimate, measure your opening twice, and give you a written quote with no surprises on the bill. If it’s not right on the paperwork, it won’t be right on the wall. That’s how we work in Wellington, and that’s how we’ll work for you.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Wellington and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.