Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
ES Windows Impact Windows in Wellington: What to Know First
ES Windows impact windows in Wellington run $1,850 to $3,400 per opening installed, depending on the line, size, and whether you’re replacing a single window or redoing a full run of glass. Most single-unit jobs are done in one visit, and full-house replacements typically take two to three days once the units arrive. We’re an independent ES Windows service provider - not a factory shop - so our quotes put your options on paper side by side, and every job carries the Done Right Promise in writing.
This page is for Wellington homeowners who own ES Windows and need repairs or replacements - and for anyone in Paddock Park, Olympia, or The Isles who’s comparing ES against other impact-rated lines before writing a check. If you have a unit that’s fogged, binding, or leaking after a storm, call (561) 349-4826. A live person answers.
Key Takeaways
- We’re an independent ES Windows service provider in Wellington - no factory affiliation, no one-sided quotes.
- Most ES Windows impact repairs are completed in a single visit.
- Both warranty layers get registered in writing before our truck leaves your driveway.
- Free estimates, line-item pricing, and a Done Right Promise on every job.
How ES Windows Products Fail - and How We Fix Them
ES Windows builds a solid impact-rated product, but like every manufacturer, they have failure patterns. Here’s what we see in Wellington, season after season.
- Fogged glass on the ESW 700 Series. The 700 Series is a common sight in Wellington’s newer builds, and we see insulated glass unit seal failures on these more than any other ES line. The cause is usually the same: thermal cycling from Wellington’s afternoon sun hitting the west-facing elevations, which stresses the sealant over time. The fix is a new IG unit sized to the original frame, set and sealed to factory tolerances. We don’t caulk over a fogged unit and call it done.
- Binding sashes on ES Tuscany casements. ES Tuscany casement windows have a good track record, but after a decade of Wellington’s humidity, the hinge hardware can corrode or the sash can settle out of square. When a homeowner says the crank is getting hard to turn or the corner of the sash drags, we pull the sash, check the frame for square, and replace the worn hardware. A sash that binds is not a lubrication problem - it’s a geometry problem, and adding grease just postpones the repair.
- Weep-hole blockage on ES impact sliders. In Wellington, we’re close enough to the Everglades that storm debris and pollen move through the air in ways homeowners inland don’t deal with. ES sliding doors have weep channels that are supposed to drain water before it reaches the interior track. When those channels clog with pollen and fine debris, water backs up and seeps under the sill - usually into the track or the drywall at the corner. We clear the channels, verify the slope, and test with a hose before we leave. If it drains, it’s fixed. If it doesn’t, we ordered the wrong repair and we’ll say so.
- Roller wear on ES 800 Series sliding doors. The 800 Series is a heavier unit, and that weight accelerates roller wear. A homeowner will notice the door getting harder to move, or a grinding feel on the track. We replace rollers with OEM or quality aftermarket parts depending on what’s still available and what matches the door’s weight rating. The track gets cleaned and aligned at the same time - replacing rollers on a misaligned track just wears out the new rollers in half the time.
- Latch misalignment after settling on ES single-hung units. Wellington sits on soil that shifts, and houses settle. When the framing settles a fraction of an inch, the latch and keeper on single-hung impact windows can fall out of alignment, leaving a gap that lets in air and lets the lock feel loose. We realign the keeper, shim where needed, and make sure the lock engages cleanly. A window that doesn’t lock tight is not doing its job, impact-rated or not.
Our ES Windows Impact Windows Process
Every ES Windows job we take in Wellington follows the same steps, whether it’s one fogged sash or a whole elevation of new impact glass. Here’s what to expect when you call (561) 349-4826.
- 1
You call, a person answers. Not a call tree, not a callback form. We take your information, ask what the window is doing (or not doing), and schedule a time that works for you.
- 2
We measure twice, on site. Every opening gets measured by hand, twice. Dale Kessler’s rule is on the whiteboard in our shop: if it’s not right on the paperwork, it won’t be right on the wall.
- 3
You get line-item options on paper. If we’re replacing glass or entire units, we quote OEM and quality aftermarket options side by side, with prices written down so you see exactly what you’re buying and what each layer of warranty covers.
- 4
We do the work in one visit when we can. Most repairs are same-visit. Full replacements depend on lead times from the manufacturer, and we tell you the date before you sign, not after.
- 5
We test the unit before we clean up. Glass sealed, locks engaged, weep channels drained, sashes moving square. If the pane is not true, the job is not done.
- 6
Both warranty layers get registered in writing. Before we leave your driveway, the manufacturer’s warranty registration and our Done Right Promise are on paper, with durations stated and no fine print to argue about later.
What ES Windows Impact Windows Costs in Wellington
Let’s talk real numbers for ES Windows impact windows in Wellington. A single ES Tuscany replacement sash with impact glass runs $1,850 to $2,600 installed. A full ES 800 Series impact slider runs $2,400 to $3,400, depending on width. A fogged-glass repair on a 700 Series unit, where the frame is still square, runs $650 to $1,100 - significantly less than a full unit replacement. If you need a whole run of windows replaced, most Wellington homes land between $18,000 and $42,000 depending on count, size, and which ES line you choose.
What moves the price is linear footage, glass package, whether the existing frame is salvageable, and what condition the opening is in once we pull the old unit. We don’t quote “starting at” prices that never reflect your actual house. We give you a written line-item estimate, and the number on the paper is the number on the bill. Call (561) 349-4826 for a free estimate on your ES Windows work - there’s a permanent 5% discount for seniors and veterans, and we’ll tell you that before you ask.
Why Wellington Homeowners Call TruePane Windows & Doors for ES Windows Work
We’ve been serving local communities since 2008, and TruePane was founded in 2008 by Dale Kessler - a second-generation glazier who grew up in Wellington’s Paddock Park and watched too many of his father’s neighbors live with jalousie windows that leaked every storm season. That background is why we treat every ES Windows job like it’s going in our own mothers’ houses - background-checked, uniformed technicians who measure every opening twice and who don’t leave until the window performs the same in year ten as it did on day one.
If ES Windows turns out not to be the right line for your home or your budget, we also quote PGT, CGI, CWS, and ECO Window Systems side by side on paper. As an independent shop, we’re not married to one manufacturer - we’re married to the install being done right. Every job carries the Done Right Promise: if it’s not done right, we make it right. No paperwork fights, no arguing. A live person answers our phone 24 hours a day, seven days a week.
FAQs
No - when repairs are done by a qualified independent ES Windows service provider using correct parts and methods, the original manufacturer warranty remains intact. We document every repair with photos and part numbers, and we register both warranty layers in writing before we leave so there’s no gray area if a claim comes up later.
Most single-unit repairs like fogged glass, roller replacement, and latch realignment are completed in one visit, often within a few days of your call. Full-unit replacements depend on manufacturer lead times, but we’ll give you a date when you sign, and we’ll be there when we say. Call (561) 349-4826 to schedule.
If the frame is square and only the glass has failed, a glass replacement runs $650 to $1,100 versus $1,850 to $2,600 for a full new unit - so repair usually saves you money. But if the frame has sagged, the rollers are shot, and the glass is fogged, you’re often looking at a unit replacement being the honest recommendation. We’ll show you both prices on paper and tell you which one we’d do on our own house.
For some older ES lines, factory parts can take weeks to arrive. When that happens, we source quality aftermarket components that match the original’s weight rating and dimensions, and we disclose it on the estimate before any work starts. You’ll never get a surprise part you didn’t approve.
When the job requires a permit - which full impact window and door replacements in Wellington typically do - we handle it as part of the scope, and the work gets inspected before we call it complete. We don’t skip the paperwork, and we don’t ask you to.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Wellington and nearby areas.
Ready to get your ES Windows impact windows done right? Call (561) 349-4826 today to schedule your free estimate. We’ll be there when we say, and we’ll put everything in writing.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After