Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterES Windows Sliding Glass & Patio Doors in Wellington: What to Know First
We service and replace ES Windows sliding glass and patio doors throughout Wellington as an independent ES Windows service provider, and most roller, track, and lock repairs are completed in a single visit. Turnaround for parts-dependent work typically runs 5 to 10 business days depending on what the unit needs, and our pricing is fixed before we start. You will not see a surprise line item when the bill arrives. Homeowners in Wellington who own an ES Windows sliding door that binds, drags, or has lost its seal can call (561) 349-4826 for a straight answer and a free estimate.
How ES Windows Products Fail - and How We Fix Them
ES Windows builds a solid aluminum frame, but every sliding door lives and dies by its rollers, its track, and the seal between the panels. Here is what we actually see in Wellington homes, based on the units that come across our bench and the jobs our technicians walk into.
- Roller collapse on the 3000 and 4000 series sliders. The original roller assemblies use a nylon wheel on a steel bearing, and in Wellington’s humidity plus the fine grit that blows in from the Everglades, that nylon wheel flattens over time. The door starts to drag, then binds, then stops moving without real force. We replace the rollers with stainless-bearing units rated for the panel weight, not the cheapest wheel that fits the housing. When we are done, the door glides with one hand.
- Threshold wear and water intrusion on the 5000 series patio doors. The 5000 series has a lower track profile, which is nice for stepping through, but the drainage channels in the threshold are shallow. Once they clog with Wellington’s afternoon downpour debris, water backs up under the interior deck. We pull the threshold, clear or re-cut the channels, re-bed it with fresh sealant, and verify drainage before we call it done.
- Lock misalignment caused by slab settlement. Wellington sits on a mix of sandy soil and fill in a number of neighborhoods, and slabs move. When the frame shifts even an eighth of an inch, the latch on an ES Windows slider no longer seats in the strike plate. Some companies hide the symptom by grinding the strike. We re-square the panel first, then adjust the lock to the real frame alignment. That is the difference between a door that locks today and one that locks for the next ten years.
- Fogged glass from seal failure on dual-pane units. ES Windows dual-pane insulated glass units can lose their seal after years of thermal cycling in the South Florida sun. Once argon leaks out and moisture gets in, the glass fogs and the insulating value is gone. We order replacement IGUs sized to the existing frame, set them square, and register the glass warranty in writing so you are covered.
- Screen track debris and torn screen mesh. Many ES Windows sliders in Wellington have exterior screen doors that ride the same track. We routinely clear compacted sand from the screen track and re-screen panels with heavy-duty mesh that holds up to cicada season and afternoon thunderstorms.
Our ES Windows Sliding Glass & Patio Doors Process
- 1
You call, a person answers. We ask what the door is doing, what the frame condition looks like, and whether you know the model series. If you do not know, that is fine. We will read it off the frame when we get there.
- 2
We come out and measure. Every opening gets measured twice. We inspect the rollers, the track, the lock, the glass seal, and the alignment of the frame against the slab. We photograph everything we plan to touch.
- 3
We give you a line-item quote and a parts decision. We show you OEM ES Windows parts and quality aftermarket equivalents side by side on paper, with prices, and explain which one makes sense for your door’s age and condition. You decide before we order anything.
- 4
We do the work in one visit, usually. Roller swaps, track resurfacing, lock adjustments, and screen replacement are same-visit repairs. Glass replacement depends on the IGU lead time. Either way, the job gets scheduled, and we show up when we say.
- 5
We test the door in front of you. Lock engagement, travel, drainage, and seal are verified while you watch. If something is off, we fix it before we leave.
- 6
We register the warranty layers in writing and hand you the paperwork. Then we haul off the old parts and clean the work area. There is no second appointment left hanging and no surprise on the final invoice.
What ES Windows Sliding Glass & Patio Doors Costs in Wellington
Here are the ranges we quote on ES Windows sliding and patio door work in Wellington. These are honest windows, not lowball teasers. Your final number depends on the panel size, the series, and the parts path you choose.
- Roller replacement (one sliding panel): $210 to $380 per panel, parts and labor
- Track cleaning and resurfacing: $90 to $165 per door
- Lock and latch alignment: $120 to $240
- Threshold water-intrusion repair and re-bedding: $340 to $680 depending on removal scope
- Replacement insulated glass unit for fogged ES Windows panel: $380 to $1,100 depending on size and low-E coating
- Full sliding door replacement (ES Windows or comparable line like PGT or CGI): $1,800 to $4,600 installed
What moves the price: panel width, door weight, whether the frame itself needs re-squaring, and the choice between OEM and aftermarket rollers. We quote fixed numbers before work starts, and the Done Right Promise covers the workmanship. Call (561) 349-4826 for an exact quote. Estimates are free.
Why Wellington Homeowners Call TruePane Windows & Doors for ES Windows Work
We have been working on Wellington doors long enough to know which ES Windows series hold up and which ones need attention at the fifteen-year mark. Dale Kessler grew up in Paddock Park, learned glazing tolerances at Palm Beach State College, and has been setting doors in Palm Beach County for going on three decades. The rule on the whiteboard has not changed: if the pane is not true, the job is not done. Every ES Windows repair is covered by our Done Right Promise, both manufacturer warranty layers are registered in writing before we leave your driveway, and our technicians are background-checked and uniformed. If ES Windows is not the right fix for your situation, we also install and service PGT, CGI, CWS, and ECO Window Systems, and we will put those options on paper honestly. A live person answers our phone at (561) 349-4826, 24 hours a day.
FAQs
Yes, in most cases we can. ES Windows still supports many of its older series, and for units where OEM parts have been discontinued, we source quality aftermarket rollers, locks, and seals that match the original dimensions. We show you both options and let you choose before anything is ordered. Call (561) 349-4826 with the model number from the frame, and we can usually tell you same-day what is available.
No, not when the work is done correctly. We use warranty-compatible parts and methods, and we register the work in writing so you have a paper trail. As an independent ES Windows service provider, we are careful to preserve whatever manufacturer coverage remains on the unit. If you are unsure what your warranty still covers, call us, and we will walk you through it.
If the frame is square and the glass seal is intact, repair is almost always the better value. Rollers, tracks, and locks are wear items designed to be serviced. Replacement makes sense when the frame is out of square from slab movement, the glass has failed, or the door no longer meets what you need for storm protection. We give you both numbers on paper and let you decide.
Most roller, lock, and track repairs are done in a single visit. If we need to order a replacement insulated glass unit or a specific OEM part, plan on 5 to 10 business days. We always tell you the expected turnaround before we start, and we stick to the schedule we give you. For an exact timeline on your door, call (561) 349-4826.
Yes, and in Wellington, this is one of the most common calls we get from May through October. The cause is usually a clogged threshold drainage channel, a failed seal at the base track, or a frame that has shifted off the original weep alignment. We find the real cause, fix it at the source, and test the drainage before we leave. Call (561) 349-4826 to schedule an inspection. Estimates are free.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Wellington and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.