Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterMr-Glass Energy-Efficient Windows in Wellington: What to Know First
We install, repair, and replace Mr-Glass energy-efficient windows throughout Wellington as an independent Mr-Glass service provider, and most single-unit work is done in one visit. A typical Mr-Glass insulated glass unit rebuild with Low-E glass runs $340-$720 per opening, while full replacement windows start around $850 installed, depending on size and frame condition. This page is for Wellington homeowners who know their Mr-Glass windows are losing their edge and want straight answers before they spend money.
We’re TruePane Windows & Doors, and we’ve been setting glass in Palm Beach County since 2008. Call (561) 349-4826 and tell us what your windows are doing. We’ll tell you what it costs to fix. The estimate is free.
How Mr-Glass Products Fail - and How We Fix Them
Mr-Glass windows are common in Wellington homes, particularly in Kissimmee River Ranch, Sugar Pond Manor, and the older sections of Paddock Park. We see the same failure patterns year after year, and most are correctable without a full frame pull. Here’s what actually goes wrong.
- Seal failure in Mr-Glass Classic Series double panes. The butyl seal on original Classic Series insulated units hardens in Wellington’s heat and humidity, typically around year 12 to 15. You’ll see condensation between the panes or a smoky film that won’t wipe off. The fix is an insulated glass unit replacement with fresh desiccant and new Low-E coating, not a whole window. We order the IGU to the tenth of an inch, set it in the existing frame, and warranty the work.
- Low-E coating degradation on the sun-facing south and west elevations. Mr-Glass windows on homes off South Shore Boulevard take direct afternoon sun for nine months of the year. The original low-emissivity coating breaks down faster here than on shaded sides, and homeowners notice the glass turning hazy or the rooms getting hotter at the same thermostat setting. We replace those panes with a heavier-grade Low-E glass that holds up better to Wellington’s UV load.
- Frame warping on Mr-Glass vinyl sliders that face the lake. Vinyl expands and contracts more than most people realize, and Mr-Glass sliders on water-facing walls in places like Wellington’s Eastwood neighborhood often develop bowed frames from constant humidity cycling. The window binds, the seal breaks, and drafts start. Depending on frame condition, we either reset and re-square the unit or recommend a full replacement with a stiffer frame profile.
- Insulated laminated glass delamination in Mr-Glass impact-rated units. The interlayer between the glass panes can separate at the edges after years of storm-driven humidity. The window still “works” but loses its energy-efficiency rating and can look milky at the perimeter. We replace the laminated IGU, and if the window is under Mr-Glass warranty, we walk you through claiming the glass while we handle the labor.
- Argon gas loss without visible fog. Not all argon loss shows up as condensation. If your power bill climbs and the glass feels warm to the touch in the summer, the inert gas between the panes has likely already dissipated. We don’t sell a gas “recharge” because it’s a short-term patch. We replace the IGU with properly filled and sealed argon glass, then note the build date on the paperwork so you know exactly what you have.
Our Mr-Glass Energy-Efficient Windows Process
When you call about a Mr-Glass window that’s not performing, here’s how the job goes, start to finish.
- 1
We measure twice and diagnose once. A uniformed technician comes out, measures the opening to the sixteenth of an inch, and tests the seal, the glass temperature, and the frame square. We’ll show you what’s failing and why.
- 2
We put options on paper. If the frame is sound, we quote an IGU rebuild with the original-spec glass or an upgraded Low-E replacement. If the frame is beyond saving, we quote a full replacement. You get a written line-item price either way, and we register both warranty layers before we leave the driveway.
- 3
We order parts to spec. For insurance and warranty compliance, we use OEM Mr-Glass glass when it’s specified in your policy or still under manufacturer coverage. When OEM is discontinued or backordered, we use a certified aftermarket IGU with equal or better efficiency ratings, disclosed up front in writing.
- 4
We remove the old unit carefully. Mr-Glass windows from certain years used adhesive tape, not structural glazing. We know the difference and we remove each unit without ruining the surrounding frame or interior trim.
- 5
We set, shim, and seal. The new unit goes in square, level, and flush. If the pane is not true, the job is not done. We don’t leave a window cocked a sixteenth off and call it good.
- 6
We test and clean up. We check the seal, verify the latch and operation, run a thermal test when needed, and leave the room cleaner than we found it. You sign off, and the Done Right Promise is in effect from that moment.
What Mr-Glass Energy-Efficient Windows Costs in Wellington
We bid honest numbers, not hopeful ranges. Here’s what Mr-Glass energy-efficient work typically costs in Wellington.
- Insulated glass unit replacement with standard Low-E: $340-$520 per panel, depending on size and glass thickness.
- Insulated glass unit with upgraded Low-E and argon fill: $470-$720 per panel for larger or impact-rated units.
- Insulated laminated glass replacement (impact-rated, code-compliant): $720-$1,050 per panel.
- Full Mr-Glass window replacement with new frame and Low-E glass: $850-$1,850 per window installed, depending on size and existing frame condition.
- Window energy audit for Mr-Glass homes: maintenance check includes seal inspection, thermal readings, and a written report.
What changes the price is glass type, frame condition, whether the window is impact-rated, and accessibility. A second-story window over a patio needs different handling than a ground-floor slider. The bid we write is the price you pay. No surprise line items, ever. Call (561) 349-4826 for a free estimate on your Mr-Glass windows in Wellington.
Why Wellington Homeowners Call TruePane Windows & Doors for Mr-Glass Work
We’ve been replacing glass in Wellington long enough to know that a fogged seal is not a small thing. It’s your power bill going up every month and your living room feeling like a greenhouse by two in the afternoon. We treat Mr-Glass work the same way we treat every other window we touch, because we plan to be here in thirty years, and we’d rather fix it right than see you again too soon.
Dale Kessler grew up in Paddock Park, so when we say we know Wellington, it’s not marketing. He learned the trade at Palm Beach State College in Lake Worth and has been setting glass in this county for going on three decades. Our techs measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves your driveway. If your Mr-Glass window is beyond reasonable repair, we’ll say so and show you side-by-side replacement quotes from the brands we’re authorized to install: PGT, CGI, CWS, ES Windows, Andersen, and more.
FAQs
We handle the labor and help you file the glass claim, but we’re not a Mr-Glass authorized service provider. If your Mr-Glass window is still under manufacturer warranty, we’ll document the failure, work with you on getting the replacement glass or crediting your cost, and install it properly. Call (561) 349-4826 and we’ll tell you exactly what your warranty covers before you spend a dollar.
In Wellington’s heat and humidity, the original seals on Mr-Glass insulated units typically last 12 to 18 years before they start losing argon or fogging. If your power bill is rising or the glass feels warm in the summer, the window may already be underperforming even without visible fog. A quick check can tell you what’s still working.
We use OEM Mr-Glass glass when it’s required for warranty coverage or material-matched in the original construction. When OEM is no longer available or the original glass has been discontinued, we use a certified aftermarket insulated glass unit with equal or better efficiency ratings, and we put the difference in writing before we order anything.
If the frame is square, the vinyl isn’t warped, and the sash still operates cleanly, an IGU replacement is usually the better money. You save the cost of a full frame and get the energy-efficiency benefit back. If the frame has been soaking in humidity for twenty years and binding every summer, replacement gets you a window that will actually perform. We’ll show you both numbers and you decide. Estimates are free.
For a single IGU replacement, most crews are out within a few days of your call, and the replacement glass is usually in our shop within a week. A live person answers our phone 24/7, so you’ll get a straight answer the first time you call (561) 349-4826, not a callback form.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Wellington and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.