Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Why Wellington Homeowners Choose PGT Windows & Doors
We provide PGT in Wellington, FL, covering independent repair, parts replacement, and full-frame installation on the WinGuard impact line, SpectraGuard vinyl, and 5400/7700 series. Our PGT work is different because we service the exact configurations Florida homeowners actually own, without being bound to any manufacturer’s authorized-repair network. That means we can source the right part, explain your options in plain English, and stand behind the repair with our Done Right Promise. As an independent PGT service provider, we are not affiliated with or authorized by PGT. If you need PGT service in Wellington, call (561) 349-4826 and a live person answers, 24/7.
Why Trust TruePane Windows & Doors for Your PGT Windows & Doors?
Our techs have pulled apart and rebuilt enough PGT units in Palm Beach County to know which failure modes show up in Wellington’s specific climate. WinGuard impact frames behave differently than SpectraGuard non-impact vinyl, and a 7700 casement in Wellington humidity is going to move differently than the same sash installed in a dry coastal condo. Dale Kessler grew up in Wellington’s Paddock Park neighborhood, where half the houses his father drove past had aluminum jalousie windows that leaked every time a storm rolled in off the Everglades. That bothered him enough to make it his life’s work. He has been measuring, setting, and sealing windows and doors in Palm Beach County for going on three decades, and the work he has built a name on is impact-rated installation: the kind where the unit performs the same in year ten as it did on day one.
Every PGT service call starts with both warranty layers registered in writing, durations stated, before the truck leaves the driveway. That is The Keystone Standard, and it applies whether we are replacing a balance shoe on a 5400 single-hung or setting a full-frame WinGuard impact window. If the pane is not true, the job is not done.
Common PGT Windows & Doors Problems We Fix in Wellington
- IGU seal failure on WinGuard impact units. Fog or condensation between the glass panes means the insulated glass unit seal has failed, letting Wellington’s humid air into the airspace. On WinGuard impact windows, this typically shows up first on southern and western exposures where thermal cycling is most aggressive. The fix is replacing the IGU, not the whole frame, unless the frame itself is compromised.
- Sagging or misalignment of heavy 7700 casement sashes. PGT 7700 impact casement windows carry a lot of weight in a single sash. In Wellington’s humidity, the friction hinges and operator hardware pick up corrosion and wear faster than homeowners expect. The crank gets stiff, then the sash drops a few degrees, and then the corner starts catching the frame. We catch it at the stiff-crank stage and replace the hinge pair before the sash racks the frame.
- Roller and track wear on 5400 sliding glass doors from pool-traffic grit. Wellington backyards mean salt-chlorinated pool water, milled shell landscaping, and bare feet tracking grit into the door track. PGT 5400 sliding glass door rollers take that grit and grind it into the aluminum track. The symptom is a door that rolls like it is on gravel but does not look obviously broken. We swap in stainless rollers rated for the full panel weight and resurface the track where possible.
- Frame leaks where WinGuard meeting rails join, especially on southern exposures. The weatherstripping where the upper and lower sashes of a WinGuard single-hung meet compresses over time, and southern-facing windows in Wellington eat weatherstripping faster because of UV load. The leak is rarely the frame. It is almost always the meeting rail gasket. We replace the gasket and check that the sashes still seat square before we call it done.
- Balance shoe failures on WinGuard 5400 single-hungs after a forced opening. Our tech pulled a WinGuard 5400 single-hung in Wellington where the lower sash had dropped off its balance shoe after the homeowner tried to force it open. We replaced the balance assembly and re-seated the sash in under an hour, no glass replacement needed, and now it closes tight against the frame again. This is a repair that costs a fraction of a new window, if the frame is still sound.
PGT Parts & Our Repair-vs-Replace Approach
We source either original PGT replacement parts or heavy-gauge aftermarket equivalents that match the impact-rated design. Impact products carry a wind-load rating, and the parts that hold that rating together: balance assemblies, rollers, locking hardware, and meeting-rail gaskets: have to match the original spec or the rating is no longer something you can count on. We do not put lightweight hardware store parts into an impact-rated window or door.
What we stock locally for PGT service in Wellington includes common WinGuard IGU sizes, 5400 roller sets, balance shoe kits, meeting rail weatherstripping, and casement hinge pairs. Most routine PGT repairs are single-visit because the part is already on the truck. When a frame is corroded through at the corners or the laminate is compromised, we will tell you honestly that you are throwing money at a unit that should be replaced. We would rather lose the repair ticket than leave you with a window that fails again next hurricane season. Call (561) 349-4826 and we will tell you straight which side of that line your unit is on.
Our PGT Service Process - Step by Step
- 1
Diagnosis. A background-checked, uniformed technician measures the unit and inspects the frame, sashes, hardware, and glass. On PGT impact products, we check that the frame is still square and that the glass laminate is intact before we quote parts.
- 2
Repair or full-frame replacement. We quote OEM or matching aftermarket parts side by side on paper so you see exactly what you are buying. If the job is full-frame replacement, we pull the old unit, prepare the opening, and set the new PGT window or door to manufacturer tolerances.
- 3
Test. We cycle every sash and door, check the weather seal on all four sides, and confirm the locking hardware engages. On impact units, we verify the frame is bedded and sealed to code before we put the stop back on.
- 4
Warranty registration. Both manufacturer warranty layers are registered in writing and handed to you with their durations stated. The Done Right Promise covers our workmanship. If it is not done right, we make it right. No paperwork fights, no arguing.
PGT Products We Service & Install in Wellington
We service and install the PGT product families that Wellington homes actually have: WinGuard Vinyl impact windows and doors, the PGT 5400 Series impact single-hung and sliding glass doors, SpectraGuard non-impact vinyl windows, and the PGT 7700 Series impact casement and picture windows. On our Window Installation services in Wellington, we also pull permits, meet Palm Beach County wind-load code with Florida Product Approval numbers, and coordinate with HOAs where architectural review applies. If you are looking at hurricane impact windows, impact sliding glass doors, or a full frame replacement, call (561) 349-4826 for a free estimate.
We Also Service These Brands
PGT is a big part of what we fix in Wellington, but it is not the only line in the neighborhood. We are an authorized installer for more than a dozen manufacturers, including, and CGI, and we quote lines side by side on paper so you see the difference in what you are paying for. If your home has a mix of brands across different sides of the house, one call covers all of it.
FAQs - PGT Windows & Doors Service in Wellington
Is TruePane Windows & Doors authorized by PGT?
No. We are an independent PGT service provider. That is deliberate. Being independent means we can service the exact configurations Wellington homeowners actually own without being bound to any manufacturer’s warranty or authorized-repair network, and we can quote replacement options across brands when a repair does not make sense.
Do you use genuine PGT or OEM parts?
We use original PGT replacement parts where they are available and make sense for the job, and heavy-gauge aftermarket equivalents that match the impact-rated design where they offer the same performance with faster turnaround. Impact-rated hardware has to match spec, and we will not install a lightweight part under an impact window. Call (561) 349-4826 if you want to know which parts your specific repair calls for.
How long does PGT service take?
Most routine PGT repairs in Wellington, like roller swaps, balance shoe replacements, and meeting rail gasket repair, are completed in a single visit because we stock the common parts on the truck. Full-frame replacements run longer and depend on permit timing and the unit being manufactured. We will give you a straight schedule before the work starts.
What PGT models and series do you cover?
We service the WinGuard Vinyl impact line, the 5400 Series impact single-hung and sliding glass doors, SpectraGuard non-impact vinyl windows, and the 7700 Series impact casement and picture windows. If your PGT unit is outside those lines, call us anyway. We will tell you honestly whether it is something we can service or something that should go back to the manufacturer.
Will service void my PGT warranty?
Repairs and part replacements performed by an independent service provider do not automatically void a manufacturer warranty, and we register both warranty layers in writing so the paper trail is clean from day one. What voids warranties is removing rating labels, installing mismatched parts, or altering the frame. We do none of those.
How much does PGT windows and doors service cost in Wellington?
PGT repair pricing in Wellington ranges from about $150 for roller and track work on a 5400 sliding glass door to $400-$900 for IGU replacement on a large WinGuard unit. Full-frame PGT impact window replacement typically runs $900-$2,200 per opening depending on size, series, and HOA requirements. Call (561) 349-4826 for an exact quote. Estimates are free.
Book Your PGT Service in Wellington, FL
If your PGT windows or doors are fogging, grinding, sticking, or leaking, call (561) 349-4826. A live person answers, 24/7, and we’ll schedule your free estimate. We’ll be there when we say, and if the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Wellington since the day he learned what an out-of-true install looks like.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After