Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterViewLux Sliding & Patio Doors in Wellington: What to Know First
We repair and replace ViewLux sliding and patio doors throughout Wellington as an independent ViewLux service provider, and most roller, track, and lock repairs on these doors take a single visit. You’ll pay a fair, square price for parts and labor with no surprise line items on the bill, and both warranty layers get registered in writing before we leave the driveway. If you own a ViewLux slider that drags, binds, or won’t lock, call us at (561) 349-4826 for a free estimate.
This page is for Wellington homeowners who already own ViewLux doors and want them working right again, or who are weighing a repair against a replacement and want straight answers. We’ll tell you what fails on these doors, what it costs to fix here, and what we do differently than the last crew you called.
How ViewLux Products Fail - and How We Fix Them
We see the same failure modes on ViewLux sliders across Wellington, especially in homes built during the 2000s condo and townhome boom. Here’s what actually goes wrong:
- Roller assemblies on the ViewLux 7600 and 8600 series flatten and chip. Wellington’s hard water and sandy soil work grit into the bottom track, and the nylon rollers grind it into the wheel face. The door drags, then jumps the track. We replace the rollers with the correct weight-rated assembly, clean and align the track, and set the door height so it rides level.
- Thermal movement breaks the seal at the interlock on the ViewLux multi-slide systems. Morning sun on the east-facing lanai doors, then afternoon shade, cycles the aluminum frame through enough expansion to peel the weatherstrip at the meeting stiles. You’ll feel a draft and see condensation. We replace the interlock weatherstrip and adjust the panel alignment so the seals meet square again.
- Lock hooks on ViewLux mortise locks misalign after roller wear. When the rollers drop, the keeper on the receiving panel sits a quarter inch too low or high, and the hook won’t seat. The lock feels broken; it’s usually just the door sagging. We fix the roller height first, then adjust the keeper, then test the lock with a lift test on the panel.
- Screen doors on ViewLux track systems lose their tension and rattle in the channel. The spring-loaded tension wheels at the top of the screen door back off over time, and the screen sags against the frame. Owners assume the screen frame is bent. We reload the tension assemblies, replace torn screen cloth in our shop, and reset the door in its channel so it glides without chattering.
- Bottom track corrosion on ground-floor ViewLux sliders in Wellington. Salt air from the coast and irrigation overspray etch the aluminum track, especially on patio doors within ten miles of the Intracoastal. The anodizing fails, the track pits, and the rollers chew up faster than they should. We clean and dress the track where it’s salvageable, and replace the track section where it isn’t, before installing new rollers on a clean rail.
Not affiliated with or authorized by ViewLux, and we don’t pretend to be. We know these doors because we work on them, not because we sell them.
Our ViewLux Sliding & Patio Doors Process
Every ViewLux job in Wellington follows the same steps, whether it’s a roller swap or a full door replacement:
- 1
Call and schedule. A live person answers at (561) 349-4826. We set a specific arrival window, and we keep it. No call center, no callback form.
- 2
Diagnostics on site. Our technician measures the door opening twice, checks panel weight, roller condition, track alignment, and lock engagement. We write down what we find.
- 3
Parts decision on paper. We quote OEM ViewLux parts where the warranty or fit requires them, and quality aftermarket parts where they’ll last longer or cost less. You see both options side by side and decide with full knowledge of the trade-off.
- 4
The repair or replacement. Uniformed, background-checked technicians do the work. We carry shims, rollers, weatherstrip, and track stock for most ViewLux configurations so the job is done the same day.
- 5
Testing and cleanup. We run the door through fifty open-close cycles, test the lock under load, check the seal with a light test, and vacuum the track and surrounding floor before we leave.
- 6
Paperwork and warranty. Both warranty layers get registered in writing before the truck leaves the driveway. If it’s not right within 90 days, we come back and make it right. No arguing, no fine print.
What ViewLux Sliding & Patio Doors Costs in Wellington
Straight numbers, because that’s what homeowners ask for first. These are ranges for the ViewLux work we do most often in Wellington:
- Roller replacement, single panel: $160-$290 including parts and labor
- Two-panel slider tune-up with roller and weatherstrip replacement: $280-$460
- Lock and keeper replacement with realignment: $130-$240
- Bottom track replacement on a standard opening: $310-$550 depending on track length and corrosion
- Full ViewLux slider replacement, standard 6-foot opening: $1,800-$3,800 depending on glass package, frame finish, and impact rating
- Panoramic or multi-slide ViewLux system work: quoted per opening after measurement, typically $700 and up
What moves the price: door weight, track condition, whether the frame is square, and whether the glass is impact-rated. We quote the full price up front, and the bill matches the quote unless we find something structural and flag it before we touch it. Call (561) 349-4826 for a free estimate on your ViewLux door. A fix is almost always cheaper than a replacement, and we’ll tell you honestly which one you need.
Why Wellington Homeowners Call TruePane Windows & Doors for ViewLux Work
We’ve served Palm Beach County since 2008 through TruePane, and the founding rule has not changed since Dale Kessler started this company in 2008: if the pane is not true, the job is not done. On a ViewLux slider, that means the rollers are set to the right height, the lock hooks engage square, the seals meet without a draft, and the door glides like it should.
Every ViewLux job carries our Done Right Promise and The Keystone Standard, which means both manufacturer warranty layers are registered in writing and the durations are stated before we leave. We’re also an authorized installer for, PGT, and CGI, so when a Wellington homeowner decides their ViewLux door has had enough and wants a replacement, we can quote multiple manufacturer lines side by side on paper. A live person answers our phone 24 hours a day, 7 days a week. Call (561) 349-4826, and you’ll speak to someone who knows what a ViewLux track looks like after ten Wellington summers.
FAQs
No. As an independent service provider, we follow the manufacturer’s installation and parts specifications on every ViewLux repair, and we document the work so your warranty remains intact. Where the warranty requires OEM parts, we use OEM parts and show you the invoice. Where aftermarket parts are better or identical at a lower price, we tell you plainly and let you make the call. We register both warranty layers in writing before we leave the driveway.
Most roller, track, weatherstrip, and lock repairs on ViewLux sliders are completed the same visit, because we carry the common parts on the truck and our technicians are trained on these specific door systems. Full door replacements typically take two to four weeks depending on the manufacturer’s lead time for the panel. A live person answers at (561) 349-4826, and we’ll give you a straight answer on timing when we know what your door needs.
Repair first, unless the frame is racked, the glass is failed, or the track is rotted through. A roller and weatherstrip job runs a few hundred dollars, while a full replacement runs into the thousands. If the door is over twenty years old, leaks at the corners, or no longer locks securely even after a tune-up, replacement is the better money. We’ll show you the numbers for both and let you decide with full information. Estimates are free at (561) 349-4826.
Yes, for most ViewLux series that were installed in Wellington over the last twenty to twenty-five years. Some early 2000s track profiles and lock bodies are discontinued, and in those cases we machine or source a matching aftermarket part that fits the existing cutouts without modifying the door panel. We’ll tell you up front if a part is discontinued and what your options are. Call (561) 349-4826 and we’ll identify your door over the phone.
Rarely, and only if we find structural damage or frame rot that was hidden behind the trim and impossible to see during the estimate. If that happens, we stop, show you exactly what we found, and get your approval before doing anything else. The price we quote is the price you pay. No change orders, no surprise line items, no fine print that covers neither. That’s the square deal, in writing.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Wellington and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.