Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterHorizontal Roller & Sliding Windows in Wellington, FL | TruePane Windows & Doors
Horizontal roller and sliding windows are a natural fit for Florida homes: wide sightlines, easy operation, and when built as an impact product, a serious barrier against hurricane-force wind and debris. TruePane Windows & Doors supplies and installs these systems throughout Wellington, FL, drawing on product lines that include PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass. Whether you’re replacing aging single-pane sliders in Olympia or building new in Palm Beach Point, we spec the right configuration for your wall opening and your wind zone. Installation is done by our own Wellington-based crew, not subcontractors. Call (561) 349-4826 to talk through your project or schedule a free on-site measurement.
Product Overview – Horizontal Roller & Sliding Windows
The horizontal roller is our workhorse impact profile. The concept is straightforward: laminated impact glass tested to withstand 140-mph winds and 9,500 lbs of wind-borne debris impact, gliding horizontally on a reinforced track. That combination of strength and simple, low-profile operation makes it the most common impact window we install in Wellington.
These windows work hard in Florida for three reasons. First, the sliding format maximizes glass area, which suits the indoor-outdoor living style of Wellington homes, from lakefront properties in The Isles to equestrian estates off South Shore Boulevard. Second, the reinforced track and interlocking meeting rails handle repeated daily use without sagging over time. Third, when the window is closed and locked, the frame and laminated glass work together as a single protective assembly rather than two separate sashes.
Architecturally, horizontal sliders sit naturally in wide living room openings, bathrooms, kitchens, and anywhere a crank-out window would interfere with walkways or patio furniture. We frame them in aluminum or vinyl, depending on your home’s construction, and finish them to match or complement your existing trim. For Wellington homes within strict HOA communities, the clean, understated sightline of a slider tends to pass architectural review without friction.
Technical Specifications
- Frame materials: Extruded aluminum or reinforced vinyl, both engineered for impact-rated glazing.
- Track configurations: 2-track (one fixed, one sliding sash) and 3-track (two sliding, one fixed or all operable), depending on wall depth and opening width.
- Glass options: Laminated impact glass with a PVB interlayer; Low-E insulated glass; tinted glass; clear glass.
- Finish options: White, almond, bronze, black, and tan. Custom finishes are available on some product lines; ask us what’s current.
- Screen options: Retractable screen or sliding screen, both removable from inside for cleaning.
- Design pressure: Matched to your specific wind zone, up to +/-100. We never oversell a higher pressure rating than the building requires.
- Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration; engineered to FBC HVHZ requirements.
Hurricane & Compliance Performance
Laminated Impact Glass
The glass consists of two panes bonded with a PVB (polyvinyl butyral) interlayer. Under impact, the glass cracks but the interlayer holds the pane in the frame, keeping the building envelope sealed. This is the same material science used in automotive windshields, scaled for hurricane loads.
Miami-Dade NOA / Florida Product Approval
Each configuration carries a Miami-Dade Notice of Acceptance (NOA) and Florida Product Approval number. These are issued per configuration, not per brand, so the exact numbers for your window size and glass package are verified on your specific quote before you commit.
FBC / HVHZ Compliance
The product is engineered to Florida Building Code High-Velocity Hurricane Zone requirements. HVHZ applies to Palm Beach County and most of coastal South Florida, so this is not an upgraded option for Wellington; it’s the baseline standard the product is built to meet.
TAS 201 / 202 / 203 Testing Context
HVHZ-rated windows are evaluated under the TAS protocol family. TAS 201 is the large-missile impact test, firing a 9-pound 2×4 timber at the glass. TAS 202 is cyclic wind-pressure loading, which simulates hurricane gusts pressing and relaxing against the window repeatedly. TAS 203 tests forced-entry resistance. This is the testing context this product earns its ratings in.
Design Pressure for Your Wind Zone
Design pressures are matched to your wind zone, up to +/-100, never higher. There is no performance benefit to over-specifying pressure ratings beyond what the building demands; it only adds cost. We calculate the required DP for your specific opening and select a configuration that meets it with a comfortable margin.
Energy Performance
Low-E and insulated glass options are available for homes where air conditioning loads matter. Low-E coatings reduce solar heat gain without noticeably darkening the view. For Wellington homes with afternoon western exposure, Low-E on the sliding glass package is often the smartest upgrade in the entire window package.
Color & Glass Options
Finish selection in Wellington usually comes down to two questions: what does your HOA allow, and what architecture is the home? White and almond remain the most common choices across the older C and D sections of the village, where the housing stock runs to traditional Florida ranch and courtyard styles. Bronze and black read more contemporary and suit the Mediterranean-inspired or modern builds in communities like Grand Isles, Buena Vida, and newer infill construction along Wellington Trace.
On glass, the decision depends on orientation and room use. Clear laminated glass is the standard starting point, giving maximum natural light and an undistorted view. Tinted glass cuts brightness in rooms with heavy southern exposure. Low-E insulated glass is our recommendation for bedrooms and large living areas where the AC runs most of the day. It is also the better option on homes where the slider faces a screened pool deck, where reflected heat is a constant. The laminated PVB interlayer stays present in every one of these packages; the impact performance does not go away when you add energy coatings.
Installation by TruePane Windows & Doors in Wellington
An impact window is only as good as the opening it is fastened into. The NOA rating assumes a specific installation method, and when shortcuts are taken, the tested assembly stops being the tested assembly. That is why we handle installations with our own Wellington crew and follow a fixed process on every opening.
We start with a pre-installation inspection of the rough opening: buck condition, flashing, existing sealant, and any water damage hidden behind the old frame. In Wellington homes built in the 1980s and earlier, we regularly find rot at the sill from years of sprinkler contact or failed caulking. That gets surfaced before installation, not after tile and trim trap it in place.
The window is set level, plumb, and square, shimmed and fastened per the manufacturer’s approved schedule. Around the perimeter we use AAMA 812 low-expansion foam sealant, which seals without pushing the frame out of square, followed by the exterior trim and sealant detail. The installation practice follows AAMA 2400 and 2410 standards. After finishing the exterior, we run a water test on the opening before interior trim goes back. Wellington’s afternoon storms and proximity to the Everglades make a water test non-negotiable on every job.
Permitting is part of the deal. HVHZ jurisdictions require the Florida Product Approval or Miami-Dade NOA documentation with the permit packet. We prepare the product approval submittal for your building department and keep the process moving. If you are changing glass sizes or opening sizes at all, the permit triggers wind-load calcs, which we coordinate as well.
Frequently Asked Questions – Horizontal Roller & Sliding Windows
Design pressures are matched to your specific wind zone, up to +/-100, never higher. Most of Wellington falls within a wind zone that the standard configured impact slider handles without special structural modifications to the surrounding wall. We calculate the required DP for each opening using the building’s exact dimensions and exposure. Call (561) 349-4826 and we can run the numbers for your house as part of a free estimate.
Lead time depends on the product line, size, glass package, and finish. Standard sizes with common colors generally arrive in four to six weeks from order; custom sizes, specialty finishes, or insulated glass add production time. Once we specify your exact configuration, we give you a written production schedule before the order is placed. Call (561) 349-4826 to get a current lead time for the window you’re considering.
Yes. Palm Beach County and the Village of Wellington enforce HVHZ building code, which means the permit package for window replacement must include the product approval documents for the exact window being installed. We prepare the NOA or Florida Product Approval submittal for your permit as part of the project. Bring your permit questions to us at (561) 349-4826.
Most horizontal sliders are built to your rough opening rather than picked off a shelf, so non-standard widths and heights are normal. Track configuration, glass type, finish color, and screen style are all selectable within the approval’s tested limits. If the opening you want exceeds the approval for that product line, we will tell you before you pay for anything.
Keep the bottom track clear of sand, leaves, and debris with a vacuum or damp cloth, and wipe the tracks with mild soap and water twice a year. Avoid petroleum-based lubricants on the rollers; they attract grit and gum up over time. If a sash starts to drag, call us at (561) 349-4826 before forcing it, since hardware repair on an impact-rated slider is a quick in-and-out service call, not a window replacement.
Get a Quote – Horizontal Roller & Sliding Windows in Wellington
If you’re pricing horizontal roller and sliding windows for a Wellington home, start with a free on-site measurement. We’ll inspect the openings, pull the wind-zone numbers, and give you a written, line-item quote with the NOA or Florida Product Approval documents for your exact configuration. Call (561) 349-4826 to schedule yours.
Written by the team at TruePane Windows & Doors, serving Wellington and Palm Beach County with hurricane-impact window and door installations.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
