Single Hung Windows

Single Hung Windows in Wellington, FL | TruePane Windows & Doors

Single hung windows are the workhorse of Florida home design: a fixed upper sash up top, an operable lower sash below, and a clean sightline that fits nearly every architectural style in Wellington. At TruePane Windows & Doors, we install impact-rated single hung windows from PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass, each built around laminated impact glass and engineered for the High-Velocity Hurricane Zone. If you’re replacing windows in a Wellington home built in the 1990s or 2000s, there’s a good chance some version of this window is on your shortlist already. Call (561) 349-4826 to talk through configurations, finishes, and a free on-site measurement.

Call (561) 349-4826

Product Overview - Single Hung Windows

Single hung windows pair a fixed upper sash with an operable lower sash in laminated impact glass. That configuration has made it one of the most common impact-rated replacement profiles in Florida homes, and Wellington is no exception. Walk through any neighborhood off South Shore Boulevard or along Greenview Shores, and you’ll see this profile everywhere: bedrooms, living rooms, second-story elevations, even enclosed patios.

The reason is balance. You get cross-ventilation from the lower sash without the added hardware complexity of a casement or awning window. The fixed upper half reduces the number of moving parts, which means fewer places for air and water to intrude during a storm. TruePane Windows & Doors installs these across our residential lines with the same care we give multi-panel sliding doors and custom commercial openings. In Wellington specifically, we see this window used most in single-family homes where the existing rough opening is already a standard vertical rectangle. It’s a direct, predictable swap with almost no interior finish disruption.

The engineering underneath matters. We offer aluminum and vinyl frame options. Aluminum carries a slimmer profile and suits modern and transitional elevations. Vinyl brings lower heat transfer through the frame and tends to be the preferred choice for energy-conscious homeowners in Wellington’s inland neighborhoods. Both frame materials hold laminated impact glass rated for hurricane exposure, and both can be ordered in colors that match existing trim, stucco, and hardcoat finishes.

Technical Specifications

• Frame materials: Aluminum or vinyl, selected for the home’s exposure and architectural style
• Glass options: Laminated impact glass with a PVB interlayer, Low-E insulated glass, tinted glass, and clear glass
• Finish options: White, almond, bronze, black, and tan
• Screen options: Half screen and full screen
• Design pressure: Matched to your wind zone, up to +/-100, never higher
• Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers available per configuration; engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements

Exact sizing varies by manufacturer line. A standard bedroom window in a Wellington home might be roughly 36 by 60 inches, while larger living-room openings run wider. We confirm every dimension during the free on-site measurement, then order from the manufacturer’s production charts.

Hurricane & Compliance Performance

Laminated Impact Glass

The glass itself does the heavy lifting. Laminated impact glass with a PVB interlayer holds the glass in the frame under impact, so even if a branch or storm-driven debris cracks the outer pane, the window stays sealed and intact. That’s the core difference between a hurricane-rated window and a standard insulated unit. In Wellington, where summer storms can move in fast, the laminated layer is what keeps water and wind on the outside.

Miami-Dade NOA / Florida Product Approval

Each frame configuration carries a Miami-Dade NOA (Notice of Acceptance) and Florida Product Approval number, issued per configuration and verifiable on your specific quote. These are not generic marketing badges. They are the documents your local building department requires when we pull a permit. We include them in every submittal package for Wellington homeowners.

FBC / HVHZ Compliance

These windows are engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone requirements. That means the product was designed for the wind and rain loads that apply in Palm Beach County, not just northern-tier standards. TruePane Windows & Doors refuses to install a window in Wellington that does not satisfy HVHZ documentation.

TAS 201 / TAS 202 / TAS 203 Testing Context

HVHZ-rated products are tested under the TAS protocol family: TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. When you see those references on a product approval, it means the system survived repeated pressure cycles, not a single peak gust. That cycle testing is what separates hurricane windows from windows that simply look strong.

Design Pressure for Your Wind Zone

We match design pressure to the actual wind zone of the home, up to +/-100, never higher. A window on the leeward side of a Wellington home in The Isles may not need the same rating as one facing open exposure near the C-23 Canal or the polo grounds, where there is less windbreak. We calculate per opening.

Energy Performance

Low-E and insulated glass options are available for energy performance. The Low-E coating reduces solar heat gain, which matters in a Florida climate where August sun hits west-facing bedrooms hard. Tinted glass cuts glare and daylight heat without changing the frame profile.

Color & Glass Options

Color choices: white, almond, bronze, black, and tan. In Wellington, the most common request is white for homes with lighter stucco and trim, and bronze for Mediterranean-style elevations with clay tile and darker fascia. Almond and tan blend well with the muted earth tones found in older communities off Aero Club Drive. Black frames have grown in popularity for contemporary and transitional remodels where homeowners want a stronger visual line against white interiors.

Glass choices follow how the room gets used. Clear laminated impact glass is the budget-conscious standard; it performs like normal glass on a sunny afternoon. Low-E insulated glass adds a thermal barrier and measurable comfort improvement for bedrooms, east-facing breakfast nooks, and any room with afternoon exposure. Tinted glass suits media rooms, offices, and spaces with large glass and high solar gain. Most Wellington homeowners mix: clear or Low-E across the main living areas, tinted in select rooms where afternoon heat gets aggressive.

Installation by TruePane Windows & Doors in Wellington

An impact-rated window only performs as well as the opening around it. That is why TruePane Windows & Doors installs every single hung window to level, plumb, and square, per AAMA 2400/2410 installation practice, with an AAMA 812 low-expansion foam perimeter seal. The foam seal fills the gap between the new frame and the rough opening so exterior air and humidity cannot migrate behind the window. Then we flash, trim, and seal the exterior per the product approval details.

Our process in Wellington starts with a pre-install inspection of each opening. We check the rough opening dimensions, the condition of the existing header and sill, and whether the current window is already sealed against water. In older Wellington homes, it is common to find wood bucks or degraded caulking from the original construction. We address that before the new window goes in. After setting the frame, we run a water test on the perimeter where practicable, clean the interior work area, and leave the job ready for paint or finish trim. We also coordinate permitting for HVHZ jurisdictions, and we know what Wellington’s building department expects on a re-window submittal.

The reason installation expertise matters here is straightforward: an NOA-rated window installed out of level or without the proper perimeter seal will not deliver the rated performance. The approval document assumes a certain installation practice. If the drain path is blocked, if the frame is racked, if the seal is skipped, the hurricane protection becomes theoretical. In Wellington, with wind exposure zones that change street to street, you want an installer who treats every opening as a water and air barrier, not just a glass replacement.

Frequently Asked Questions - Single Hung Windows

Get a Quote - Single Hung Windows in Wellington

We’d rather quote your windows in person than guess from a photo. TruePane Windows & Doors provides free on-site measurements in Wellington, with line-item pricing and a written quote before any commitment. No pressure, no change orders. Call (561) 349-4826 to schedule your free estimate for single hung windows or any other impact-rated replacement project in Wellington, FL.

Written by the team at TruePane Windows & Doors, serving Wellington, FL with hurricane-impact window and door installations across PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines.