Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Custom Windows & Doors Across Golf
Custom windows and doors in Golf, FL run between $900 and $4,500 per opening installed, with oversized glass panels, custom shapes, and full-frame replacements landing at the higher end. In Golf specifically, that price carries an extra layer most homeowners don’t see coming: nearly every lot backs up to an active fairway, so the glass you choose isn’t just a style decision. It’s a daily-use requirement. We work in Golf every week, know the HOA review process cold, and quote the job once, in writing, before any work starts. Call (561) 349-4826 for a free estimate.
Why TruePane Windows & Doors Is Golf’s Preferred Custom Windows & Doors Company
TruePane has spent years earning a reputation in Palm Beach County communities like Golf, where the homes are large, the expectations are higher, and the architectural review board reads every line of the spec sheet. We’re not a franchise crew that shows up once and disappears. We hire local technicians, train apprentices into journeymen, and answer the phone with a live person 24 hours a day. That matters when a slider stops locking on a Saturday afternoon or an HOA reviewer wants documentation by Tuesday morning.
Golf homeowners see the difference in the details. Our crews are background-checked and uniformed. Every opening gets measured twice. Every quote puts manufacturer lines side by side on paper so you can compare Andersen, Pella, Marvin, and Milgard without guessing what you’re paying for. And because we’ve done custom shape windows, architectural grilles, and oversized panels in Golf’s Mediterranean Revival and ranch-style estate homes, we know what the Country Club of Florida HOA expects before you file the application. Dale Kessler’s rule from day one still holds: if the pane is not true, the job is not done.
Our Custom Windows & Doors Services in Golf
The Custom Windows & Doors work we do in Golf rarely involves a standard off-the-shelf unit. These estate homes were built with sightlines to the course, and the glazing follows the architecture. Here’s what we handle most.
Custom Shape Windows
Arched tops, radius corners, hexagonal transoms, quarter-rounds above a front door. Golf homes built in the 1970s and 1980s leaned on Mediterranean Revival details, and those shapes don’t come off a shelf at a big-box store. We template each opening precisely, order the glass to the exact radius, and install it so the curve reads true from both inside and the fairway. Most custom shapes in Golf run $1,100 to $3,800 per unit depending on size and whether impact-rated glazing is required, which it almost always is.

Architectural Grilles & SDLs
Simulated divided lites, or SDLs, are a recurring point of friction in Golf. The HOA architectural review board wants grid patterns that match the original Mediterranean Revival or ranch aesthetic, and a mismatch means a rejected application and a re-order that drags out the project by weeks. We spec the exact grid width, profile, and color against photos of the existing windows before you spend a dime on fabrication. That pre-approval documentation is standard practice on every Golf bid.

Oversized Glass Panels
When your living room is oriented toward the ninth fairway, you don’t want a mullion cutting the view in half. Oversized panels, whether fixed picture windows or sliding door sidelites, demand careful engineering: wind load calcs, tempered or laminated glass selection, and frame reinforcement. In Golf, where design wind speeds exceed 130 mph under Palm Beach County’s Wind-Borne Debris Region code, the glazing has to hold up to hurricane forces and the occasional stray tee shot. A single oversized impact-rated panel typically runs $2,800 to $6,500 installed in Golf, fabrication and freight included.

Commercial Storefront Glazing
Golf itself is almost entirely residential, but we also handle commercial storefront and curtain wall systems for clients in the surrounding western communities who need the same standard of work. If you’re building or renovating a small commercial space, our glaziers handle aluminum storefront systems, glass entrances, and curtain wall assemblies with the same Keystone Standard we apply to every home.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Golf
We’re an authorized installer for more than a dozen manufacturer lines, and the brands that show up most often in Golf are for custom residential work, with appearing regularly on impact-rated projects. Being an authorized installer means we register both warranty layers in writing before the truck leaves your driveway. If a pane fails or a hardware issue crops up later, the warranty path is already documented. No digging through paperwork, no arguing about what’s covered. We stock common parts and hardware locally, so a latch replacement or a roller adjustment on a slider doesn’t mean waiting two weeks for a shipment.
Common Custom Windows & Doors Problems We See in Golf Homes
- Failed seals on original single-pane picture windows. These homes were built in the 1970s through early 1990s, and the original windows are now 35 to 50 years old. A fogged pane isn’t just cosmetic; the argon is gone and the insulating value is shot. We scope every opening with a moisture meter before recommending repair versus replacement.
- Pitted aluminum frames from salt-laden air. Golf’s proximity to the Atlantic means marine air sits on frames year-round. Non-marine-grade aluminum corrodes, the finish pits, and the hardware seizes. We see this constantly on original sliding glass doors that still function but look decades older than they are.
- Impact glazing spec’d for wind code but not for golf ball strikes. A cheaper impact product may pass the county inspector and still dent or spider-crack when a Titleist comes off a three-wood at speed. We recommend laminated glass with the right interlayer for fairway-adjacent elevations, not just any code-compliant unit.
- HOA architectural review rejections. This is the slowest, most expensive failure mode in Golf. A custom window ordered with the wrong grid pattern or frame color gets rejected, and the homeowner eats the re-order cost and the delay. We photograph, document, and pre-clear every selection with the Country Club of Florida’s review process before fabrication begins.
Pricing for Custom Windows & Doors in Golf, FL
Custom windows and doors in Golf generally range from $900 for a modest custom shaped venting window up to $6,500 or more for an oversized impact-rated sliding door or panoramic fixed panel. The factors that move the number in Golf aren’t the same as in neighboring cities. A fairway-facing elevation means laminated impact glazing throughout, not just on the windward side. County-level permitting applies since Golf isn’t a municipality with its own building department, and that adds plan review time and fees. HOA architectural pre-approval adds documentation but saves you from a re-order. We walk each bid with those line items visible on paper. Call (561) 349-4826 and we’ll give you a free, written estimate scoped to your exact house.
We Also Serve Cities Near Golf
Beyond Golf, our crews work regularly in Wellington, Belle Glade, Loxahatchee Groves, and Westlake. If you own a home in one of those communities and need custom windows or doors, the same TruePane team handles the job with the same Done Right Promise and the same live-person phone line at (561) 349-4826.
Serving Golf, FL - Our Local Coverage Area
We’re based in the Golf area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Golf
Yes. Every home in Golf falls within Palm Beach County’s Wind-Borne Debris Region, where code requires opening protection for design wind speeds exceeding 130 mph. That’s true whether you back up to the first tee or sit on an interior lane. The fairway-adjacent homes need the same impact rating, but we’ll also recommend laminated glass with an interlayer suited to golf ball strikes on those elevations. Call (561) 349-4826 for a free assessment of what your specific home needs.
If we’ve pre-cleared the selections, yes. The most common rejection reason in Golf is a grid pattern or frame color that doesn’t match the original Mediterranean Revival or ranch aesthetic. We photograph the existing windows, match the SDL width and profile, and submit the documentation before fabrication. That pre-approval step is part of every Golf bid, not an add-on. Call (561) 349-4826 and we’ll walk you through the approval path for your home.
Yes. We’ve replaced dozens of pitted aluminum sliders in Golf with new thermally broken aluminum or marine-grade units that match the original frame profile and finish. The key is selecting a product rated for coastal salt exposure, not a standard interior-grade aluminum. We’ll quote manufacturer lines side by side so you can see exactly what you’re getting before you commit. Estimates are free at (561) 349-4826.
A fogged seal on an insulated glass unit means the seal has failed and the argon fill has leaked out. It is generally not repairable as a standalone fix; the IGU needs replacement. The good news is that in many cases we can replace just the glass unit inside the existing frame if the frame is structurally sound. We’ll scope it with a moisture meter and tell you honestly what the job requires. Call (561) 349-4826 for a free quote on IGU replacement in Golf.
Yes. Any new structure in Golf falls under the same Palm Beach County Wind-Borne Debris Region code as the main house, which means impact-rated windows and doors are required on the detached building too. We also scope the septic and well setbacks and grading before quoting, since those affect how equipment accesses the site and where long glass panels can be staged. Call (561) 349-4826 to talk through the project before you pull the county permit.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Golf since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After