Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Palm Springs
Custom windows and doors in Palm Springs are rarely a simple swap. The village’s CBS ranch homes, most built between 1950 and 1975, carry non-standard rough openings, original jalousie frames, and door widths that don’t match anything on a supply-house shelf. We’ve measured hundreds of these openings, and we know what it takes to build a unit that fits the first time. If you’re pricing a jalousie replacement, an oversized fixed pane, or a custom entry door, call (561) 349-4826 and we’ll walk you through the numbers before you spend a dollar.
We’re TruePane Windows & Doors, and we’ve been setting glass in South Florida long enough to know Palm Springs requires a different approach than the tract subdivisions going up west of 441. Dispatch and scheduling run through our South FL office, but the crews measuring and installing in Palm Springs live and work nearby.
Why TruePane Windows & Doors Is Palm Springs’s Preferred Custom Windows & Doors Company
The work we do in Palm Springs centers on homes that were framed before hurricane codes existed, before insulated glass was standard, and before anyone thought about wind mitigation credits. That’s our home turf. We’ve pulled permits for jalousie-to-impact retrofits on dozens of the village’s 1960s-era ranches, and we’ve learned which openings will accept a standard pocket insert and which need full-frame tear-outs. Homeowners here don’t want a sales pitch. They want a company that has done the job on a house like theirs and can point to what it cost. We give them that.
Dale Kessler founded TruePane in 2008 after years of seeing out-of-true installs and voided warranties across the county. The rule on his whiteboard hasn’t changed since: if the pane is not true, the job is not done. Every Palm Springs job gets both manufacturer warranty layers registered in writing before the truck leaves the driveway. That’s The Keystone Standard, and it’s not optional at our shop.
We answer the phone with a live person 24/7. Not a callback form. When a homeowner near Congress Avenue or Greenbrier Drive has a window that won’t seal after a storm, they want a voice, not a portal. We also run background-checked, uniformed technicians who measure twice and quote side by side on paper. Most jobs are completed in a single visit, and the work is covered by our Done Right Promise. If it’s not done right, we make it right. No paperwork fight.
Our Custom Windows & Doors Services in Palm Springs
Our Custom Windows & Doors work in Palm Springs falls into a few categories, and each one carries its own lead time, permit path, and price. Here’s how we handle them.
Custom Shape Windows
Palm Springs ranches sometimes have odd, fixed glass: narrow awning units over bedroom windows, trapezoid panes under gable ends, sidelight panels beside front doors that are 11 inches wide when modern stock starts at 14. We build these to order. A fixed awning window in a 1960s CBS ranch typically carries a custom fabrication charge, and we tell you that before you commit. No surprise line items on the bill.
Commercial Storefront Glazing
Palm Springs isn’t a big commercial market, but the storefronts along Lake Worth Road and Military Trail include older strip centers with single-pane aluminum frames that have pitted from inland humidity. We replace storefront glass, entrance doors, and transom panels. The county requires impact-rated or shutter-protected openings on most commercial work, and we handle the Florida Product Approval documentation as part of the job.
Curtain Wall Systems
Curtain wall work in Palm Springs is rare, but when a property owner does need it, usually on a small professional building or a modern infill project, the glazing vendor’s lead time controls the schedule. We coordinate that timeline. The price is fixed in writing before we order a single lite.
Architectural Grilles & SDLs
Homeowners who are replacing jalousies or sliders often want the original look back. Simulated divided lites (SDLs) and architectural grilles let a new impact-rated window keep the visual character of a 1962 ranch without sacrificing wind protection. We quote grille patterns, finish colors, and glass packages side by side on paper. You see exactly what you’re paying for.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Palm Springs
We’re an authorized installer for more than a dozen manufacturers, including. That matters in Palm Springs because the old openings on these homes sometimes call for a specific line’s custom sizing or a particular glass package. We stock common parts locally and can quote multiple manufacturers on the same opening so you can compare frame material, U-factor, and cost without listening to a brand pitch. When a PGT or CGI impact unit fits your budget better than a wood-clad Andersen, we tell you that. It’s a square deal.
Common Custom Windows & Doors Problems We See in Palm Springs Homes
- Pitted and seized aluminum frames. Inland humidity and UV exposure oxidize the original aluminum on 1950s-1970s ranch windows. The frames pit, the tracks bind, and eventually the sashes stop operating. Replacement means a full-frame job, not a pocket insert.
- Jalousie windows flagged in wind mitigation inspections. Palm Beach County insurers are increasingly flagging jalousies as unprotected openings. The premium surcharge can run hundreds a year, and we’ve seen cases where replacement paid for itself within a few policy years.
- Non-standard rough openings. Door openings on Palm Springs CBS homes are frequently narrower or wider than a 30- or 32-inch stock unit. Forcing a stock frame means shim stacks and flashing tape warranties that are void before the drywall goes back on. We order custom or modified units.
- Sweating glass and mold around frames. Single-pane interior glass runs cold in air-conditioned air and condenses in South Florida’s humidity. Over time, that moisture feeds mold in the drywall around the frames. New low-E insulated units stop the condensation at the source.
Pricing for Custom Windows & Doors in Palm Springs, FL
Here’s what we tell homeowners who call our office. A standard impact-rated window replacement in a Palm Springs CBS ranch typically runs $900-$1,700 per opening, depending on size and frame material. A full jalousie-to-impact conversion with insulated glass and new jamb extensions usually lands between $1,200 and $2,100 per window. Custom fixed awnings or picture windows, built to a non-standard opening, start around $1,000 and run up from there depending on the glass package. Entry doors with impact-rated glass panels run $2,800-$6,500 installed, with custom sizing pushing the upper end. Oversized glass panels and architectural SDLs carry a premium because the insulated glass units are built to order. Lead time on custom IGs right now is 10-14 weeks from most vendors. That sets the calendar, not our crew schedule. We give you a written, line-item quote before we order anything. Call (561) 349-4826 to get yours.
We Also Serve Cities Near Palm Springs
Our crews regularly run from Palm Springs out to Wellington, Belle Glade, Loxahatchee Groves, and Westlake. If you’re on the western edge of the county and need a custom window or door measured, we’ll route the nearest truck to you. Scheduling runs through the same office line, and the same Keystone Standard applies everywhere we set glass.
Serving Palm Springs, FL - Our Local Coverage Area
We’re based in the Palm Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Palm Springs
Yes, in most cases it will. When a Palm Beach County wind mitigation inspector flags jalousies as unprotected openings, the insurer applies a surcharge. On a typical 3-bedroom, 2-bath Palm Springs ranch, that surcharge often runs $200-$500 per year. Replacing the jalousies with impact-rated units that carry a valid Florida Product Approval number removes the flag and can trigger a wind mitigation credit. We recently retrofitted a 1962 CBS ranch near Lake Worth Road where the homeowner’s premium dropped by nearly $400 a year after we installed impact-rated low-E units in the secondary bedrooms. At that rate, the job pays for itself within a handful of policy years. Call (561) 349-4826 and we’ll run the numbers with your home’s opening schedule.
Ten to fourteen weeks from most glazing vendors, measured from the day we finalize the order. Custom insulated glass units, especially those with argon fill, low-E coatings, or specialty shapes, are built to specification, not pulled from a warehouse. The schedule is set by the vendor, not by our crew calendar. We quote the lead time in writing when you place the order, and we don’t promise a date we can’t keep. If you need something before a specific date, tell us at the estimate and we’ll see what glass packages can move faster. The phone number is (561) 349-4826.
Almost always, yes. The rough openings on Palm Springs CBS homes are concrete block, and re-framing them is expensive and structurally invasive. We measure every opening twice and order units built to the as-built dimensions, not to a stock size. That means slightly narrower or wider sashes, custom jamb extensions, and sometimes modified nail fins. It costs more than a stock insert, but it’s far cheaper than cutting block. And it keeps the flashing tape warranty intact because we’re not shimming a unit into an opening it was never meant to fit.
No. You can’t keep actual jalousies and get impact protection; the louvered glass doesn’t meet the county’s code. But you can keep the look. We order impact-rated fixed awning or casement units with architectural grilles or SDLs that mimic the horizontal louver pattern. The sightlines are close, the glass is insulated and low-E, and the unit carries its own Florida Product Approval number. For a 1968 CBS home, that’s the difference between a retrofit that looks like it belongs and one that fights the house.
The frames aren’t sweating; the glass is. Single-pane aluminum frames conduct cold from your air-conditioned interior to the exterior glass surface. South Florida’s humidity, even inland without salt spray, condenses on that cold surface as water. The water runs into the tracks, soaks the drywall around the frame, and feeds mold. New insulated glass units with warm-edge spacers break that thermal bridge. The inner glass surface stays closer to room temperature, and the condensation stops. We’ve seen it repeatedly in ranch homes along Greenbrier Drive and other original Palm Springs subdivisions.
Get a Straight Answer and a Written Quote
If you live in Palm Springs and your jalousies are failing, your frames are pitted, or you’re pricing a custom door that actually fits your opening, call us. You’ll get a live person on the line, not a voicemail tree. We’ll send a background-checked technician to measure, quote manufacturer lines side by side on paper, and register both warranty layers in writing before we order a thing. No surprise line items, no second appointment left hanging. Call (561) 349-4826 today to schedule your free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Palm Springs and the surrounding communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.