Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Westgate
Custom windows and doors in Westgate are rarely a simple swap. The homes here, mostly 1950s to 1970s CBS block construction, carry original jalousie and single-pane aluminum sliders that fail Palm Beach County’s Wind-Borne Debris Region inspection the moment a permit is pulled. We’ve worked enough openings off Okeechobee Boulevard and throughout the unincorporated neighborhoods to know what the county inspector will flag before we ever put a tape measure to the rough opening. If you’re in Westgate and the fogged glass or corroded frame has finally pushed you to act, call (561) 349-4826. We’ll walk you through exactly what the county requires and what the job should cost.
Why TruePane Windows & Doors Is Westgate’s Preferred Custom Windows & Doors Company
Westgate homeowners call us for the same reason they keep calling: we know the county’s building code as well as the county does. We’re not a franchise playbook. TruePane was founded by Dale Kessler, a second-generation glazier who built the company on a rule that still governs every install: if the pane is not true, the job is not done. That matters in Westgate, where out-of-square CBS openings and decades-old jamb erosion turn a standard replacement into a beam-and-shim job that most installers won’t touch without change orders.
Our Westgate customers see the same crew on every visit: background-checked, uniformed technicians who measure twice and quote manufacturer lines side by side on paper. We register both warranty layers in writing before the truck leaves the driveway. That’s The Keystone Standard. We stand behind every opening for 90 days under our Done Right Promise. No paperwork fights. No arguing. If something isn’t right, we fix it.
One more thing. When you call TruePane at (561) 349-4826, a live person answers. Not a voicemail tree, not a call center in another state. 24 hours a day, seven days a week. For the kind of job Westgate demands, that’s the only way to run it.
Our Custom Windows & Doors Services in Westgate
Custom Shape Windows
Westgate’s older CBS homes sometimes have eyebrow windows, circular vents, or trapezoid openings over entry doors that no stock unit will fit. The original frames are usually so far gone that the only correct fix is a full tear-out and a custom-ordered impact-rated unit built to the exact rough opening. We measure every opening twice, order the shape from an authorized manufacturer, and set it with flashing taped to Palm Beach County spec. A custom shape window in Westgate typically runs $900-$2,400 installed, depending on glass package and frame material.
Architectural Grilles & SDLs
If you want the look of divided lites without sacrificing impact rating, simulated divided lites, or SDLs, are the standard choice for Westgate homes. We install them interior and exterior, matched to the manufacturer’s frame color so the lite pattern reads true from the curb. For a 1950s rattan-and-terrazzo Westgate bungalow, an exterior SDL with a 2-1/2″ muntin profile keeps the mid-century character while meeting WBR code. Expect $180-$450 per lite package upgrade depending on window count and profile.
Oversized Glass Panels
Westgate has a steady stock of CBS homes with large fixed picture windows facing the street or the yard. When those fail, usually from seal failure or frame corrosion, the replacement glass must be impact-rated if the opening exceeds the county’s size threshold. Oversized impact panels for a Westgate opening run $1,800-$5,200 per unit installed. That’s real money, but a single failed seal on an 8-foot picture window leaks conditioned air year-round, and once the county flags it during a permit inspection, you’re replacing it anyway. Better to do it once, done right.
Trusted Brands We Service in Westgate
We’re an authorized installer for more than a dozen manufacturer lines, and in Westgate we service and install, ES Windows most often. Andersen’s impact-rated lines hold up well to humidity and salt air; ES Windows offers the cleanest slim-line sightlines on modern single-family; ViewLux gives us a strong thermal break for southwest-facing openings. We stock local replacement parts and weatherseals for all three lines, which means faster turnaround when a louvered or slider component fails mid-season.
Common Custom Windows & Doors Problems We See in Westgate Homes
- Corroded jalousie frames: The original aluminum jalousie frames on 1960s Westgate CBS homes corrode from salt air and humidity until the jambs literally crumble. You cannot retrofit over them. The entire unit must come out. We’ve seen frames so degraded that the louver clips pull free from the jamb with two fingers.
- Failed seal on original aluminum sliders: Single-pane horizontal sliders from the ’60s and ’70s lose their glazing compound after forty years of Palm Beach County sun. The glass rattles, water seeps, and the frame bows. Even if the opening were square, the aluminum is too far gone to hold an insert.
- Out-of-square rough openings: Decades of settling and long-deferred maintenance on Westgate rental CBS homes leave window and door openings that are 1/4″ to 1/2″ out of square. A stock unit won’t seat. The custom window must be shimmed and flashed with a sloped sill pan against driving rain, or the seal fails within a season.
- County permit failures on unpermitted replacements: We follow behind a lot of handyman work in Westgate where jalousie windows were swapped for non-impact units without a county permit. The inspector catches it, the work is red-tagged, and the homeowner pays twice. Westgate has no municipal building department; every opening goes through Palm Beach County Building Division, and WBR compliance is not optional.
On a 1963 CBS rental off Okeechobee Boulevard, our crew found every original jalousie frame corroded beyond repair. Salt air had eaten through the aluminum jambs. We pulled full tear-outs and set fusion-welded, impact-rated single-hungs with argon-filled low-E glass, flashing taped the rough openings to county spec, and the inspector signed off the same day because the Florida Product Approvals were already filed.
Pricing for Custom Windows & Doors in Westgate, FL
What we charge in Westgate falls into three bands. A standard impact-rated replacement window on an existing opening runs $950-$2,100 per unit installed, including tear-out, flashing, and county permit work. Custom shape windows start around $1,400 and run to $3,800 depending on glass area and frame complexity. Oversized panels and full jalousie-to-impact whole-house scopes land between $2,800 and $8,500 per opening once you’re into custom sizing and structural shimming. The biggest cost driver in Westgate is not the window. It’s the condition of the rough opening. If the jamb is rotted, the lintel is sagging, or the opening is out of square by more than 3/8″, the labor to prep that opening properly can exceed the cost of the window itself. We scope all of that before we quote. You’ll get a written line-item estimate, and we pull every permit through Palm Beach County Building Division. Call (561) 349-4826 to schedule your free estimate.
We Also Serve Cities Near Westgate
TruePane serves Custom Windows & Doors in Westgate and the surrounding communities: Wellington, Belle Glade, Loxahatchee Groves, and Westlake. Whether you’re on a canal lot in Loxahatchee or a newer build in Westlake, the same county permit rules and the same Done Right Promise apply.
Serving Westgate, FL - Our Local Coverage Area
We’re based in the Westgate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Westgate
Yes. Every replacement window and exterior door in Westgate requires a permit through Palm Beach County Building Division, because Westgate is unincorporated and has no municipal building department of its own. The county enforces Wind-Borne Debris Region compliance on every opening, which means jalousie windows cannot pass inspection and must be replaced with impact-rated units. We handle the permit, the Florida Product Approval paperwork, and the inspection scheduling for you. Call (561) 349-4826 for an exact quote; estimates are free.
The aluminum frames on Westgate’s original 1950s-1970s CBS homes are too corroded to hold a retrofit insert. Humidity and salt air have spent fifty years eating the jambs, and the frame is the part that fails first. A retrofit requires a structurally sound existing frame; in Westgate, that frame usually crumbles when we remove the old glass. Full tear-out and impact-rated replacement is the correct fix.
Any exterior door you replace in Westgate must meet WBR impact standards or be paired with an approved secondary protection system. That includes front doors, side doors, garage entry doors, and sliding patio doors. A standard non-impact door will fail county inspection. We quote impact-rated doors as the default for every Westgate project. Call (561) 349-4826 and we’ll line-item both options on paper so you can see the difference.
Yes, if they’re built and set correctly. We use impact-rated insulated glass units with argon fill and low-E coatings from manufacturers like ES Windows and Andersen, whose seal designs are engineered for coastal Florida humidity. The failure point is almost never the glass; it’s a poorly flashed rough opening that lets moisture sit against the frame. We flash tape every opening to Palm Beach County spec, and we warranty the work for 90 days under our Done Right Promise.
Ignore it, and you’re losing conditioned air through a failed seal while the moisture between the panes spreads to the frame. In a Westgate rental, that fogged window is also a county permit trigger: the moment you replace it, the county requires impact-rated compliance on that opening. A fogged jalousie or single-pane slider rarely gets cheaper to fix the longer you wait. Call (561) 349-4826 and we’ll scope the whole house before the next humid season.
Written by Dale Kessler, Owner at TruePane Windows & Doors. Serving Westgate and Palm Beach County with the Keystone Standard: if the pane is not true, the job is not done.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.