Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Ocean Ridge
Door installation in Ocean Ridge carries a set of demands most mainland contractors never plan for. The barrier island’s double salt-air exposure, from the Atlantic on one side and the Intracoastal on the other, means a door that works fine in Boynton Beach can corrode, bind, or blow in here within a few years. TruePane Windows & Doors has been replacing and installing doors on this narrow strip of Florida coastline long enough to know which frames, hinges, and thresholds actually hold up. If you need a straight answer about what your Ocean Ridge home requires, call (561) 349-4826 for a free estimate. We measure twice, quote in writing, and register both warranty layers before we leave your driveway.
Why TruePane Windows & Doors Is Ocean Ridge’s Preferred Door Installation Company
We’re not the cheapest bid you’ll get for Door Installation in Ocean Ridge. That’s intentional. The homeowners who call us have usually been through a bad install already, or they’ve watched a neighbor’s new door start pitting and seizing two years after a bargain crew finished the job. Dale Kessler founded this company on a rule that’s still on the whiteboard: if the pane is not true, the job is not done. That means our background-checked, uniformed technicians measure every opening twice, quote manufacturer lines side by side on paper, and don’t leave until the work is done right. We’re an authorized installer for more than a dozen manufacturer lines, including, PGT, and CGI. Our Done Right Promise is in writing. No paperwork fights. No fine print.
Ocean Ridge homeowners deal with our team directly. A live person answers every call, 24/7. We’ve worked on homes up and down A1A, through the numbered side streets that run between the ocean and the Intracoastal, and we understand what this island does to a door. We pull permits, we meet Palm Beach County’s coastal wind-speed code, and we stand behind every install with The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves the driveway.
Our Door Installation Services in Ocean Ridge
The homes here span mid-century ranches and newer waterfront estates, and the door work reflects that. Here’s what we do most often in Ocean Ridge.
Entry & Swing Doors
An Ocean Ridge front door faces one of two punishing forces: direct salt spray off the Atlantic, or the steady Intracoastal humidity that works its way into every hinge and threshold. We install fiberglass and Impact Windows & Doors - Ocean Ridge with stainless hardware as standard here. Anodized or PVDF-coated frames are not an upgrade on this island; they’re the baseline if you want the door to open smoothly five years from now.
Double & French Doors
Double French doors are common on Ocean Ridge homes, especially on the Intracoastal side where they open onto a patio or pool. The challenge is panning, flashing, and anchoring them for 160 mph wind loads while keeping the sightlines clean. We use impact-rated manufacturer lines like PGT and CGI, and we register every warranty layer in writing. If your current French doors bind in summer or leak during a hard coastal storm, the fix is usually a full-frame replacement, not another shim job.
Storm Doors
Storm doors here are not decorative. On a barrier island, they’re a sacrificial first layer against wind-driven rain and salt. We install storm doors with reinforced corners, non-corrosive closers, and thresholds that drain properly. A correctly hung storm door protects your primary entry door and buys it years of extra life.
Pivot Doors
Custom and contemporary Ocean Ridge homes sometimes call for a pivot-style entry. These are heavy, and on a barrier island the anchoring detail matters more than the aesthetics. We spec pivot hinges rated well above the door’s actual weight, and we tie the frame into the rough opening with the same wind-load calculations we use on any oceanfront opening.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Ocean Ridge
We’re an authorized installer for more than a dozen manufacturer lines, and on Ocean Ridge jobs we commonly quote, PGT, CGI, and ES Windows side by side on paper so you can see the actual cost difference. For modern homes with clean architectural lines, we also work with ECO Window Systems on Energy-Efficient Windows - Ocean Ridge projects. We do not push one brand. We show you the numbers, the warranty durations, and the hurricane ratings, and you decide. Parts for these lines are stocked locally, which keeps Ocean Ridge turnaround tight when a component needs replacing.
Common Door Installation Problems We See in Ocean Ridge Homes
- Salt-pitted aluminum frames and seized multi-point locks on Intracoastal-side doors. The island is less than half a mile wide at its narrowest, so even a “west-facing” door catches salt air from the ocean on one side and the waterway on the other. Standard architectural aluminum without anodized or PVDF finishes starts pitting and the lock hardware seizes within three to five years.
- Leaking and air infiltration on 1950s-70s ranch sliders that never got a full-frame tear-out. The original rough openings on those mid-century homes were sized for thin non-impact frames. Shoving a thicker impact-rated unit into the old opening without reframing leaves gaps at the head and jambs that leak during a coastal storm.
- Hinge pull-out on outswing doors mounted with standard anchors. Palm Beach County’s coastal wind-speed design requirements for the Ocean Ridge shoreline zone reach 160 mph. A standard hinge jamb secured with a few screws can’t hold that load. We tie the framing together and add structural blocking behind every hinge point.
- Thresholds and weatherstripping breaking down within one or two seasons. The constant moisture on this island eats conventional materials fast. We spec stainless, PVDF-coated, or marine-grade thresholds and compression weatherstripping on every Ocean Ridge install, regardless of whether the door faces the ocean or the Intracoastal.
Pricing for Door Installation in Ocean Ridge, FL
In Ocean Ridge, a standard entry door replacement typically runs $1,800 to $4,200, including the slab, hardware, and labor. A double French door replacement, impact-rated and fully flashed for coastal wind loads, generally falls between $6,500 and $14,000 depending on size, glass package, and whether we’re doing a full-frame tear-out. Storm doors run $700 to $2,200. Pivot doors are custom work; those start around $7,000 and go up with the hardware and engineering. Full-frame tear-outs on 1950s-70s ranch openings add $600 to $1,800 per opening, because we’re reframing to the structural requirements of the new impact unit. If the home sits on acreage with a long setback from the road, material staging and access can add a modest amount to the bid, and we’ll tell you that number before we start. Every quote is written, line-itemed, and fixed. Call (561) 349-4826 for your free estimate.
We Also Serve Cities Near Ocean Ridge
Our crews work throughout Palm Beach County’s coastal and western communities. If you’re in Ocean Ridge or nearby, give us a call. We regularly install doors in Wellington, Belle Glade, Loxahatchee Groves, and Westlake, and we schedule Ocean Ridge work directly with the same team every time.
Serving Ocean Ridge, FL - Our Local Coverage Area
We’re based in the Ocean Ridge area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Ocean Ridge
Because the island is so narrow that the Intracoastal side still gets hit with salt-laden air from both directions. The Atlantic drives wind and salt spray from the east, and the waterway adds humidity and moisture from the west. A door on the “calm” side of the house is still getting double exposure unless the frame is anodized or PVDF-coated and every piece of hardware is stainless or marine-grade. If your Intracoastal-side door is pitting or the lock is starting to stick, call (561) 349-4826 for a free estimate on a replacement built for this island.
Usually yes. The original rough openings on mid-century Ocean Ridge homes were framed for thin, non-impact aluminum sliders. Modern impact-rated frames are significantly thicker, and trying to force one into the old opening leaves gaps that leak and draft. A full-frame tear-out lets us square the opening, add proper flashing, and anchor the new unit to Palm Beach County’s coastal wind-load requirements. We’ll tell you whether your opening needs it before we quote, and the tear-out cost is always a separate line item. Call (561) 349-4826 to schedule a measurement.
For Ocean Ridge’s shoreline zone, Palm Beach County requires impact-rated glazing designed for wind speeds up to 160 mph. That applies to entry doors, French doors, sliders, and any other exterior opening. We spec doors meeting or exceeding that rating on every Ocean Ridge install, and we register the manufacturer’s wind-load certification in writing as part of The Keystone Standard. Call (561) 349-4826 for a quote that includes the exact ratings on your doors.
On larger Ocean Ridge properties with long setbacks from the road, door installation can cost more because of material staging, equipment access, and the time it takes our crew to move tools and doors from the street to the opening. If the home has a detached workshop, guest house, or ADU, each structure gets its own rough-opening measurements and wind-load assessment. We scope all of that before we hand you a number, so the quote reflects the actual job. Call (561) 349-4826 to have someone measure and price it.
Yes, and we do it regularly. A detached structure still has to meet the county’s coastal wind-speed design requirements if it’s part of a permitted build on your property. We install impact-rated French, single, and Sliding & Patio Doors - Ocean Ridge on outbuildings with the same stainless hardware and PVDF finishes we use on the main house, because a workshop door that corrodes or blows in becomes a bigger problem than the door itself. Call (561) 349-4826 for a free estimate on any structure on your property.
Contact TruePane Windows & Doors
If you need door installation in Ocean Ridge done right, call (561) 349-4826. We’ll answer the phone, schedule a measurement, and give you a written quote with real numbers. The Keystone Standard means both warranty layers get registered in writing before our truck leaves your driveway, and the Done Right Promise means we fix it if it isn’t right. No arguing. No fine print.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Ocean Ridge and surrounding Palm Beach County communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.