Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Energy-Efficient Windows Across Wellington
Energy-efficient window replacement in Wellington typically runs $38,000 to $72,000 for a full-home retrofit of a 2,000-square-foot CBS ranch, which is roughly 15 to 25 percent less than the same job in coastal Boca Raton or Delray Beach because standard Florida Product Approval (FL number) meets code here no Miami-Dade NOA required. Most Wellington homes need low-E argon-filled insulated glass units with impact-rated frames, and the work is usually completed in one to two days per opening depending on the stucco condition. Call (561) 349-4826 for a free, line-item estimate from our Energy-Efficient Windows team.
Wellington is not a coastal town, but the salt-laden air that pushes inland off the Everglades and the Atlantic still finds aluminum window frames here and pits them slowly over twenty years. We see it constantly on the original single-pane units in Versailles, Olympia, and the Palm Beach Polo estates. The difference between a window that lasts fifteen years here and one that fails in eight comes down to frame material, hardware spec, and how the flashing is done. That is the work we do.
Why TruePane Windows & Doors Is Wellington’s Preferred Energy-Efficient Windows Company
Dale Kessler founded TruePane in 2008 on a rule that has not changed since: if the pane is not true, the job is not done. He came up as a second-generation glazier, and the work still gets measured twice, set once, and checked with a level before the caulk goes on. Wellington homeowners who have lived in the same house for twenty or thirty years recognize that standard when they see it. They have also seen the other kind, the crew that hits the stucco with a hammer drill at 7:30 a.m., leaves foam shavings in the landscaping, and is unreachable when the frame settles out of square six months later.
Our technicians are background-checked and uniformed, and they work in your home the way they would work in their own mother’s. We register both manufacturer warranty layers in writing before the truck leaves the driveway. That is The Keystone Standard, and it means when a seal fails or a latch binds, there is a piece of paper with a duration on it, not a phone tag argument. Wellington homeowners have been calling us for years because we answer the phone, we show up when we say, and we stand behind the work.
The service area for Energy-Efficient Windows in Wellington includes every neighborhood from South Shore Boulevard down to the equestrian acreage off Pierson Road. Dispatch and scheduling are coordinated from our South Florida office, and crews serve Wellington locally. We know which HOAs require architectural review before a window color changes and which code paths apply to your street. That local knowledge matters when a permit is on the line.
Here is what our Wellington customers care about most:
- Licensed and insured with written line-item quotes before any work is scheduled.
- No surprise change orders. The price on the estimate is the price, unless you add scope.
- Done Right Promise on every job. If it is not done right, we make it right. No paperwork fights, no arguing.
- A live person answers every call, 24/7. Not a voicemail tree, not a callback form.
- Permanent 5% discount for seniors and veterans. Ask when you call.
Our Energy-Efficient Windows Services in Wellington
We install, replace, and service Window Installation in Wellington for energy-efficient windows for Wellington homeowners. Most of our work here involves replacing the original single-pane aluminum windows in 1980s and 1990s CBS homes with modern low-E argon-filled units that meet Palm Beach County’s wind-borne debris requirements. Here are the four services we handle most often in Wellington.
Low-E & Argon Gas Glass
Low-E coatings and argon gas fills are the workhorses of energy-efficient replacement windows in Wellington. A low-E coating reflects radiant heat back toward its source, which means the July sun hitting your west-facing windows gets bounced back outside instead of baking your living room. Argon gas between the panes slows thermal transfer by about 30 percent compared to plain air. Together, a low-E argon-filled insulated glass unit can reduce solar heat gain through the glazing by up to 70 percent. For a Wellington home with original single-pane glass, that is the difference between an air conditioner that cycles and one that runs all afternoon. We stock and order both hard-coat and soft-coat low-E options depending on whether UV protection or solar heat rejection is your priority.

ENERGY STAR Replacement Windows
ENERGY STAR certified windows for South Florida carry a U-factor of 0.40 or lower and a Solar Heat Gain Coefficient (SHGC) of 0.25 or lower. Those numbers matter in Wellington because our cooling season runs roughly April through November, and the SHGC is the single biggest driver of cooling load. A certified unit with the right SHGC rating for Palm Beach County will cut heat gain through the glass without turning your living room dark. We quote ENERGY STAR units side by side on paper with their ratings printed, so you see exactly what you are buying and how it will perform in Wellington’s climate, not a generic Florida brochure. Most homeowners in Wellington save 20 to 35 percent on cooling costs after a full retrofit, depending on how much of the house is glass and which direction the big openings face.

Double & Triple Pane Windows
Double-pane insulated glass units are the standard for Wellington replacement windows. They are code-compliant, quieter than single-pane, and when paired with low-E coatings and argon, they deliver the energy performance most homeowners expect. Triple-pane units are available and make sense on specific applications: large west-facing glass, rooms where noise from Forest Hill Boulevard or the polo grounds is a real concern, or second-story windows that get direct afternoon sun. They cost about 20 to 30 percent more than equivalent double-pane units, and the extra pane adds roughly 10 points of sound reduction. For most Wellington homes, a high-quality double-pane with low-E and argon is the right balance of performance and cost. We will tell you honestly if triple-pane is worth it for your particular openings, and we will quote both so you can decide on paper.

UV-Blocking & Fade Protection
Ultraviolet light is the silent problem in Wellington homes with original single-pane glass. We have walked through enough Versailles and Olympia living rooms to recognize the pattern immediately: a diagonal fade line across the hardwood where the old sash shadow fell, a leather sofa bleached on one arm, artwork that looks ten years older on the sun side. UV damage is cumulative and it does not reverse. Low-E coatings block 70 to 95 percent of UV radiation depending on the glass package, and that is the only long-term fix short of curtains on every window. For Wellington homeowners who have invested in hardwood floors, leather furniture, or original art, UV-blocking low-E glass is not an upsell. It is protecting what is already inside the house. We also offer tinted glass options for rooms where glare is the main complaint and solar control takes priority over maximum visible light.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Wellington
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Wellington homes we frequently quote Pgt repair in Wellington, CGI, and ES Windows depending on the opening and the HOA constraints. PGT and CGI both manufacture impact-rated aluminum and vinyl lines that are built in Florida and tested for the wind-borne debris region Wellington falls under. ES Windows offers a higher-end aluminum frame with exterior colors that hold up well against the salt-laden air and humidity that pit cheaper frames. We keep common parts and hardware in stock for service calls to Wellington, which means a broken sash or a failed balancer does not leave you waiting on a manufacturer shipment. When we quote, we put the manufacturer lines side by side on paper, with their warranty durations and performance ratings printed, so you can compare what you are actually paying for.
Common Energy-Efficient Windows Problems We See in Wellington Homes
Most Wellington homes were built between the late 1970s and the early 2000s, and the original windows were single-pane aluminum frames that are now twenty to forty-five years old. Here is what we find when we open up those openings.
- Electrolytic pitting on aluminum frames where they meet concrete stucco. Wellington’s humidity keeps a thin film of moisture at the aluminum-stucco interface, and salt in the air accelerates the corrosion. The southwest corner of the house is always the first to go because that is the side Hurricane Wilma’s unusual track hammered in 2005, and years of wind-driven rain pushed water into the frame joints. Once the aluminum starts pitting, the frame loses structural integrity and the seal around the glass begins to fail.
- Fogged glass from failed seals. When the desiccant inside an insulated glass unit is spent and the seal lets humid air in, condensation forms between the panes. It looks like fog that never wipes away. The thermal performance of the unit is gone, the view is ruined, and the only real fix is replacing the glass unit or the window. We see this constantly on the original double-pane units that were installed in the early 1990s Versailles and Palm Beach Polo homes, which are now past their service life.
- Thermal holes from hollow-core French doors. The early equestrian estate homes in Mallet Hill and the Polo neighborhood frequently came with non-impact hollow-core French doors. After decades of humidity cycling in western Palm Beach County, those doors bow, the weatherstripping compresses, and air leaks around the perimeter. In the heat of summer, a bowed French door is a thermal hole in the side of the house. The fix is a full tear-out to an impact-rated insulated glass door with marine-grade stainless hinges, which is what we spec.
- Uneven UV fading that maps exactly to the old sash shadows. We can walk into a Wellington living room and see exactly where the original single-pane sashes sat by the fade lines on the floor. That kind of damage happened over ten to fifteen years, and it is done. The only protection for what is left is low-E glass that blocks the UV before it gets through. We do not sell window film as a substitute for proper low-E glazing, because film fails in the Florida sun and does not address frame-level air leakage.
Pricing for Energy-Efficient Windows in Wellington, FL
Here are real numbers for the Wellington market, based on the jobs we quote and install here. A full-home retrofit of a 2,000-square-foot CBS ranch with standard-size openings typically lands between $38,000 and $72,000 for impact-rated low-E argon-filled vinyl double-hung units. A single standard 36-by-60-inch opening replaced with a PGT or Simonton impact-rated vinyl unit runs $1,850 to $3,400 installed, depending on stucco condition, trim work, and whether the rough opening needs remediation. Oversized openings on equestrian estate homes, those eight-foot or wider sliding glass door conversions in Palm Beach Polo, run $4,500 to $11,000 per opening because they require commercial-grade sizing and reinforced headers that still pass the HOA’s architectural review board. We also install Wellington Glass Railing Systems for these estate properties.
What moves the price in Wellington is not the glass as much as the frame and the code path. Impact-rated vinyl is the most affordable code-compliant option. Impact-rated aluminum with a painted finish runs 25 to 40 percent more and is what most HOAs on the equestrian corridor prefer. The code path matters too: Wellington falls in Florida’s wind-borne debris region but outside the High Velocity Hurricane Zone, so a Florida Product Approval (FL number) is sufficient. You do not need to pay the 15 to 25 percent premium for Miami-Dade Notice of Acceptance (NOA) products that coastal Palm Beach County requires. Call (561) 349-4826 for a free estimate and we will give you a written line-item quote with the exact prices for your openings. No surprise line items on the bill, ever.
We Also Serve Cities Near Wellington
Our crews work throughout Wellington and the surrounding communities. If you live in Royal Palm Beach, Greenacres, West Palm Beach, or Palm Beach Gardens, we handle energy-efficient window replacement and service there too. The code paths and housing stock are similar, and the same team that works in Versailles and Olympia today can be at your door with a written quote. Call (561) 349-4826 and a live person will answer.
Serving Wellington, FL - Our Local Coverage Area
We’re based in the Wellington area and know this community well, providing Custom Windows & Doors in Wellington. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Energy-Efficient Windows in Wellington
No, you do not need Miami-Dade NOA products in Wellington. Wellington sits in Palm Beach County’s wind-borne debris region but outside the High Velocity Hurricane Zone that covers Miami-Dade and Broward counties. A standard Florida Product Approval (FL number) impact-rated window meets code here, and it saves you roughly 15 to 25 percent compared to the same opening with an NOA-rated product. We pull permits, pass inspection, and register both warranty layers in writing. Call (561) 349-4826 for a quote on the correct spec for your street.
That pitting is electrolytic corrosion, and it is common on the original aluminum frames in Wellington’s 1980s and 1990s CBS homes. The aluminum sits directly against concrete stucco, and Wellington’s year-round humidity keeps a thin film of moisture at that interface. Salt in the air, carried inland from the Atlantic, accelerates the reaction. The southwest corner of the house is typically the worst because that is the side Hurricane Wilma’s unusual track hit in 2005 with wind-driven rain. Once pitting starts, the frame loses strength and the glass seal begins to fail. The permanent fix is a full replacement with vinyl or thermally broken aluminum, flashed with butyl tape to stop the weep-path corrosion. Call (561) 349-4826 and we will assess your frames at no cost.
Fog between the panes means the insulated glass unit’s seal has failed and the desiccant inside is saturated. The thermal performance of that window is gone, and the condensation will not wipe away because it is trapped inside the unit. There is no repair that restores a failed seal. The glass unit or the entire window must be replaced. We see this constantly on early 1990s homes in Versailles and Palm Beach Polo where the original double-pane units have reached the end of their service life. The replacement is straightforward, and we do it in a single visit. Call (561) 349-4826 for pricing on a glass-unit replacement or a full-frame retrofit.
Most Wellington HOAs on the equestrian corridor, including Palm Beach Polo and Mallet Hill, will approve impact-rated energy-efficient units as long as the frame color, sightlines, and hardware finish match the original or the HOA’s published palette. The key is submitting the right specification package with your application, which means the Florida Product Approval number, the performance ratings, and a detail drawing that shows the sightline dimensions. We prepare that package as part of our quote, and we have worked with the major Wellington HOA boards often enough to know what gets sent back for revision. The 140-mph wind-load spec and the aesthetic review are not in conflict if the submittal is done correctly. Call (561) 349-4826 and we will walk you through it.
Wellington homeowners who replace original single-pane aluminum windows with ENERGY STAR certified low-E argon-filled units typically see a 20 to 35 percent reduction in cooling costs, depending on how much glass the house has and which direction the big openings face. A 2,000-square-foot CBS ranch with significant west-facing glass will land at the higher end because the west-facing glass is what drives afternoon cooling load from April through November. The SHGC rating is the number that matters most in our climate, and we quote it on paper so you can see exactly what you are getting. Call (561) 349-4826 for a free estimate with real numbers for your house, not a brochure range.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Wellington and western Palm Beach County. If the pane is not true, the job is not done.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After