Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterENERGY STAR Replacement Windows in Wellington, FL
ENERGY STAR replacement windows in Wellington typically cost between $850 and $1,400 per opening, depending on the energy-efficient windows glass package, frame material, and the specifics of your existing window frame. These windows are engineered to meet strict U-factor and Solar Heat Gain Coefficient (SHGC) standards, which are critical for managing the intense Florida heat we see in Palm Beach County. If your current windows are single-pane or have compromised seals, upgrading to ENERGY STAR certified units often reduces cooling loads significantly. At TruePane Windows & Doors, we handle the entire process, ensuring every window is measured twice and installed to meet current building codes. If you are noticing condensation between panes or your AC unit seems to run constantly during the summer months, call us at (561) 349-4826 to schedule an estimate.
Choosing the right windows isn’t just about the label; it is about how the unit performs in our specific climate. Wellington experiences high humidity and significant sun exposure, which can degrade inferior window materials quickly. Our team focuses on Energy-Efficient Windows in Wellington that are built to withstand this environment, ensuring your home stays comfortable without putting unnecessary strain on your HVAC system. We don’t believe in one-size-fits-all solutions. When we visit your property, we evaluate your home’s orientation, existing insulation, and your specific comfort goals before recommending a brand or model.
When You Need ENERGY STAR Replacement Windows
Many homeowners in Wellington wait until a window is physically broken before considering replacement, but there are often clear signs that your windows are costing you money long before they fail completely. We recommend looking for these specific indicators:
- Internal Condensation: If you see fog, water droplets, or streaks between the panes of glass, the seal has failed. Once this seal breaks, the inert gas (typically argon or krypton) that provided the thermal barrier is gone, and the window loses its insulating value.
- Binding or Sticking Sashes: Florida’s humidity causes frames to expand and contract, and over time, the house settles. If you have to fight to open or close a window, it is likely that the frame is no longer square, which also compromises the weatherstripping and lets outside air infiltrate your living space.
- Heat Transfer on Interior Glass: On a hot afternoon, place your hand on the inside of your glass. If the window feels hot to the touch, you are losing the battle against solar heat gain. ENERGY STAR windows are designed to reflect that heat away from your home.
- Drafts and Air Leaks: If you can feel a breeze near the window frame on a windy day, or if you notice your curtains moving when the windows are locked, you have air infiltration. This is a primary driver of high utility bills in older Wellington homes.
- Faded Flooring or Furniture: UV rays pass through standard glass, causing carpets, hardwood floors, and upholstery to fade. Quality replacement windows come with Low-E coatings that block the majority of harmful UV rays while still allowing natural light into your home.
- Outdated Operation Mechanisms: If you are still using manual latches that don’t lock securely or balances that require a stick to hold the window open, you are operating with outdated hardware that lacks the security and ease of use found in modern, certified units.
If you notice two or more of these issues, it is likely time to replace the unit rather than attempt a repair. We provide honest assessments; if a window can be tuned up and saved, Dale Kessler and our team will tell you so. If it needs to be replaced, we will show you exactly why. Call (561) 349-4826 to discuss your specific situation.
Our ENERGY STAR Replacement Windows Process
Replacing windows is a construction project, not just a delivery service. We approach every job with the understanding that we are working in your home, not a showroom. Our process is designed to minimize disruption while ensuring the highest level of craftsmanship.
- Initial Assessment and Precise Measurement: We start by visiting your home to inspect the condition of your existing frames. We measure every opening twice to ensure the new windows fit perfectly. During this visit, we also discuss your preferences regarding manufacturers like Pella, Andersen, or Marvin, providing side-by-side comparisons of their ENERGY STAR ratings on paper.
- Custom Ordering and Verification: Once you approve the quote, we order your specific windows. We do not use “off-the-shelf” stock. Every order is verified against our measurements to ensure the unit is manufactured to the exact specifications of your home’s openings.
- Site Preparation and Protection: On the day of installation, our uniformed technicians arrive prepared. We use drop cloths and protective materials to cover your floors and furniture. We treat your home the way we would treat our own mothers’ homes, ensuring the work area remains clean and safe throughout the day.
- Removal and Installation: We carefully remove the old window units, ensuring the surrounding drywall or stucco is not damaged. We then install the new ENERGY STAR windows, ensuring they are level, plumb, and square-if the pane is not true, the job is not done. We use high-quality flashing and sealant to prevent water intrusion, which is vital in our climate.
- Warranty Registration and Cleanup: Before we leave your driveway, we register both manufacturer warranty layers in writing. You will have all the documentation you need for your records. We clean the work area, haul away the old materials, and perform a final walk-through with you to ensure every latch works and every pane is clean.
Our commitment to the home environment means we don’t cut corners on the installation materials, such as the flashing or the sealant, because we know that the best window in the world will fail if it isn’t installed correctly. We are in this for the long haul, and we want to ensure your windows perform as expected for decades.
ENERGY STAR Replacement Windows Pricing in Wellington
Pricing for window replacement is never a flat rate because every home has different requirements regarding Low-E & Argon Gas Glass strength, frame size, and the type of installation needed. However, we believe in upfront pricing with no surprises. Below are the general factors that influence the cost of your project.
| Window Type/Factor | Estimated Price Range |
|---|---|
| Standard Single-Hung (Vinyl) | $850 - $1,100 per unit |
| Casement or Picture Windows | $1,100 - $1,600 per unit |
| Impact-Rated ENERGY STAR Upgrade | +$300 - $500 per unit |
| Installation Complexity (Stucco/Masonry) | Varies by opening |
These ranges include the window unit, professional installation, and our Done Right Promise. We provide itemized quotes so you can see exactly what you are paying for-no hidden fees, no “administrative” charges, and no surprises on the final invoice. If you are looking for a square deal, call (561) 349-4826 to schedule a free estimate. We bring our catalog to you, so you can see the quality of the frames and solar & tinted glass options in your own light.
FAQs - ENERGY STAR Replacement Windows
Is it cheaper to repair or replace a window?
It is almost always cheaper to repair a window if the issue is minor, such as a damaged latch, a broken balance, or a torn screen. However, if the seal has failed (fogging between panes), the glass is cracked, or the frame is warped, repair is often not possible or cost-effective. Replacing a single, failing unit with an ENERGY STAR certified window usually provides better long-term value by lowering your energy bills and improving home security. Call (561) 349-4826 for an honest assessment of whether a repair will suffice or if replacement is the smarter move.
How long does the installation process take?
Most standard residential window replacements in Wellington are completed in a single visit. We pride ourselves on being punctual and prepared, which allows us to remove old units and install the new ones efficiently without leaving your home exposed to the elements overnight. For larger projects involving full-home replacements, we provide a clear timeline before we start so you know exactly when to expect us and when the work will be finished.
Do I need impact-rated windows for ENERGY STAR compliance?
In many parts of Wellington, building codes may require impact-rated glass due to hurricane zone regulations, but ENERGY STAR certification is a separate standard focused on thermal performance. You can have non-impact windows that are ENERGY STAR certified, or impact-rated windows that are also ENERGY STAR certified. We will guide you through the code requirements for your specific address and help you select the right glass package with UV-blocking & fade protection that satisfies both energy goals and safety standards.
What does the Done Right Promise cover?
Our Done Right Promise means that if you find an issue with our workmanship within 90 days of the installation, we will make it right-no paperwork fights, no arguing, and no fine print. We stand behind our installations because we are a second-generation glazier company that plans to be in this community for another years. If the pane is not true, the job is not done, and we will return to correct it immediately.
If you are ready to upgrade your home with windows that actually perform, reach out to us. We answer our phones 24 hours a day, 7 days a week, and we are happy to answer your questions about manufacturer lines like Andersen, Pella, or Marvin. Call (561) 349-4826 to schedule your free estimate today.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Wellington.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.