Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Westgate
Window installation in Westgate almost always means one thing: pulling out a 1950s-1970s aluminum frame that Palm Beach County will not let you keep. If you live in Westgate, you already know the houses we are talking about. Single-story CBS block homes, original jalousie windows, sliding glass doors that fog between the panes and bind in the humidity. The short version: a window swap here is not a window swap. It is a permit-triggered, WBR-rated, Westgate Window Replacement in most cases. TruePane has done enough of them in Westgate to tell you the truth before the first wall is opened, not after. Call (561) 349-4826 and we will walk your house, measure every opening, and put the real scope in writing for free.
Why TruePane Windows & Doors Is Westgate’s Preferred Window Installation Company
We are the company Westgate homeowners call when a retrofit quote falls apart. Here is why that keeps happening: Westgate is unincorporated, so every replacement window and door permit runs through the Palm Beach County Building Division. That division enforces Wind-Borne Debris Region compliance, which means impact-rated glass or an approved secondary system on nearly every opening. Our Window Installation crews know the County’s checklist cold because Dale Kessler built this company on the rule that if the pane is not true, the job is not done. We measure twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves your driveway.
Our reputation in Westgate is not built on a review count. It is built on the fact that background-checked, uniformed technicians show up when we say they will, work around your schedule, and leave the job clean. Dispatch and scheduling are coordinated from our South Florida office, and the crews serve Westgate locally. We hire local, train apprentices into journeymen, and act like a company that plans to be in town in thirty years. A live person answers the phone 24/7, not a voicemail tree. When a Westgate homeowner calls at 6 a.m. about a storm-battered window, they talk to a person, not a callback form.
Our Window Installation Services in Westgate
Most of the work we do in Westgate falls into a few categories, and each one comes with its own County permit reality. Here is how we handle the four most common jobs.
Impact-Rated Casement Windows
Casement windows are a smart choice for Westgate CBS homes because they seal tight against wind-driven rain and meet WBR requirements cleanly when glazed with Impact Windows & Doors - Westgate-rated laminated glass. On an older Westgate house, though, the original rough opening is rarely square, and the existing frame is usually corroded beyond insert-retrofit tolerance. We price these as full-frame replacements from the start, with the framing upgrade written into the quote, not sprung on you after the wall is open. A typical impact-rated casement replacement in Westgate runs $900-$1,650 per opening installed.
Fixed & Picture Windows with Laminated Glazing
Westgate homeowners often want a larger fixed window to bring in light without adding an operable unit, which simplifies the County approval process. Fixed and picture windows are the most economical impact-rated option because there is no hardware to fail. The catch on older Westgate homes is the lintel: many 1950s-1970s CBS openings have undersized headers that the County inspector will flag once the wall is exposed. We document the existing lintel condition during the estimate, so you know if a header upgrade is coming. A fixed impact window in Westgate typically runs $700-$1,200 per opening, depending on size and lamination spec.
Sliding Windows - Full-Frame Replacement
The horizontal aluminum slider is the most common original window in Westgate, and it is also the one most likely to be corroded through from decades of humidity and salt air. When the jamb crumbles, an insert retrofit is off the table; the County requires full-frame replacement once the wall is open. We quote full-frame sliders as the default on Westgate homes, with the finish materials and flashing tape spec matched to what your block wall can actually hold. A full-frame impact-rated sliding window in Westgate runs $850-$1,550 per unit installed, assuming the framing does not need a full rebuild.
Awning Windows, Single & Double Hung
Awning windows work well in Westgate bathrooms and kitchens where you want ventilation without giving up storm protection. Single and double hung units are less common here than sliders, but some Westgate homeowners prefer the vertical look for street-facing openings. Every hung or awning unit we install in Westgate is impact-rated and full-frame, because a County inspector will not accept a sash-only swap on a 1960s opening. Awning windows run $750-$1,300 per opening; hung units are $800-$1,450 depending on size and glazing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Westgate
We are an authorized installer for more than a dozen manufacturer lines, and for Westgate work we most often quote, PGT, and ES Windows side by side on paper so you can see exactly what each opening costs at each performance level. Andersen gives Westgate homeowners a wide range of composite and Energy-Efficient Windows - Westgate options; PGT is a Florida product through and through and built for this climate; ES Windows brings the hurricane-rated aluminum and wood-clad lines that hold up to salt air. We register both manufacturer warranty layers in writing before the truck leaves the driveway, and our Done Right Promise covers the workmanship on every job. If it is not done right, we make it right, no paperwork fight and no fine print.
Common Window Installation Problems We See in Westgate Homes
- Corroded aluminum frames that cannot be retrofitted. Westgate homes sit close to the Atlantic, and the salt air plus high humidity eats aluminum from the inside out. We regularly find jamb sections that crumble in our hands during removal, which turns a retrofit quote into a full tear-out and full-frame replacement the County will not waive.
- Cloth-wrapped wiring inside the wall cavities. Opening a CBS block wall around an old window in Westgate often exposes original 1950s-1970s electrical wiring that predates current code. The permit inspection will not sign off until the wiring in the work zone is brought up to standard, and that cost needs to be in your quote from the start, not in a surprise change order.
- Jalousie windows that trigger a stop-work order. If a Westgate home still has louvered jalousie panels, the County inspector will red-tag the opening the moment it is visible. Jalousies provide zero wind-borne debris protection, cannot be made compliant with hardware upgrades, and must be fully replaced with impact-rated units to pass. A one-door call can expand to a whole-house scope this way.
- Failed flashing tape and undersized framing. The rough openings on many 1950s-1970s Westgate CBS homes were built before current nailing-fin and flashing-tape specs existed. Once the wall is open, the inspector checks the flashing and the framing. If either is substandard, the permit stops until we write the upgrade into the contract and do the work properly.
We pulled a permit for a 1962 single-story CBS rental on Okeechobee Boulevard near Westgate Avenue after the owner called about a fogged single-pane slider. The original aluminum jalousie and horizontal slider frames were corroded through from salt air, and once we opened the wall, the rough opening had undersized framing and failed flashing tape. The County inspector would not sign off until we replaced the entire opening with a full-frame, impact-rated Simonton double-hung with low-E glass and argon fill, documented the U-factor and SHGC on the product approval, and wrote the framing upgrade into a change order before touching it. That is the Westgate reality, and we build every quote around it.
Pricing for Window Installation in Westgate, FL
Here are the line-item ranges we quote in Westgate, installed and before any framing or wiring upgrades:
- Impact-rated casement window, full-frame: $900-$1,650 per opening
- Fixed or picture window with laminated glass: $700-$1,200 per opening
- Impact-rated sliding window, full-frame: $850-$1,550 per opening
- Awning window, impact-rated: $750-$1,300 per opening
- Single or double hung, impact-rated: $800-$1,450 per opening
- Framing repair or lintel upgrade, if required by inspection: $150-$600 depending on scope
- Wiring remediation in the work zone, if required: quoted by a licensed electrician, typically $300-$900
What moves the number in Westgate: whether the opening is a clean full-frame swap or a tear-out with framing repairs, whether the home has original cloth-wrapped wiring in the wall cavities, and whether a jalousie opening forces a larger unit than you planned. We quote all of it up front as a written line-item estimate, not a phone-ballpark. Call (561) 349-4826 and we will walk the house and price the real job. Estimates are free, and the quote you get is the quote you pay unless the County inspection turns up something we could not see before opening the wall, in which case you approve any change order in writing before we touch it.
We Also Serve Cities Near Westgate
TruePane handles window installation for homeowners in Wellington, Belle Glade, Loxahatchee Groves, and Westlake as well, and our Window Installation in Westgate crews cover the full area. Each of those cities has its own permitting path and building stock, but the standard is the same: measure every opening twice, quote both warranty layers in writing, and do the job right the first time. If you are a few minutes outside Westgate, call (561) 349-4826 and we will tell you straight what your windows need.
Serving Westgate, FL - Our Local Coverage Area
We’re based in the Westgate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Westgate
Westgate sits inside Palm Beach County’s designated Wind-Borne Debris Region, which means the Florida Building Code requires every replacement window and exterior door to meet impact-resistance standards or be paired with an approved secondary protection system. Yes, you can in some cases use approved shutters or panels instead of impact glass, but the permit application must specify the secondary system, and the inspector must sign off on the entire opening. In practice, most Westgate homeowners find that impact-rated units are simpler to permit and easier to live with than wrestling shutters before every storm. Call (561) 349-4826 and we will quote both paths so you can compare on paper.
Because Westgate is unincorporated, there is no municipal building department to issue or inspect window permits. Everything runs through the Palm Beach County Building Division, and that division enforces WBR-rated Florida Product Approval on every opening. Your neighbor in an incorporated city may have fallen under a different permitting authority with different retrofit rules. In Westgate, there is no shortcut. We pull the permit on every job, and the inspection is part of the price, not an option.
No. Jalousie windows, the louvered glass panels common in 1960s South Florida tract homes, provide zero wind-borne debris protection and cannot be made compliant with hardware upgrades or glass swaps. Palm Beach County inspectors will red-tag the opening until it is replaced with a WBR-compliant impact-rated unit. If you have jalousies in your Westgate home, plan for full-frame replacement of every opening, and call us at (561) 349-4826 so we can scope the whole house before the permit goes in.
The three we see most often in Westgate: cloth-wrapped wiring that predates current code and must be remediated in the work zone, undersized rough-opening framing that fails the current nailing-fin and flashing-tape specs, and lintels that were never sized for the opening. We quote framing and lintel work up front based on what we can inspect before demolition, and any wiring remediation is priced by a licensed electrician before the wall is closed. We write allowances for this into the contract, and every change order is approved by you in writing before we touch it. Call (561) 349-4826 for a free estimate that accounts for the real conditions in a Westgate house.
Fog between the panes means the insulated glass seal has failed, and on a Westgate slider that has been in place since the 1970s, the frame is almost certainly too corroded to accept a new glass pack. Reglazing the sash is a stopgap that will not pass a County inspection and will not fix the failed frame. The correct repair is a full-frame impact-rated replacement, documented on the permit and approved by the Building Division. We will tell you straight whether your specific opening has any chance of a glass-only fix, but plan for replacement. Call (561) 349-4826 and we will confirm it in person.
If you live in Westgate and your windows are fogged, corroded, jalousie, or just outdated, the next step is a free on-site estimate. We will walk every opening, check the framing, check for the wiring and flashing issues the County inspector will flag, and put the true scope in writing before you spend a dollar. Call TruePane Windows & Doors at (561) 349-4826. A live person answers, and we will be there when we say.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Westgate and surrounding Palm Beach County communities. Founded in 2008 on the rule that if the pane is not true, the job is not done.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.