Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Window Replacement Across Westlake
Window replacement in Westlake usually means one of two things: swapping out builder-grade glass for a better-performing low-E/argon unit, or fixing a Minto-spec component that failed before it should have. We’ve worked on enough Westlake homes since the first neighborhoods went in to know which one you’re dealing with, usually within the first few minutes on the phone. Our crews work in Westlake weekly, and we stock the OEM gaskets, rollers, and hardware that these specific builder packages use, so most insert replacements and door repairs get handled in a single visit. Call (561) 349-4826 for a free estimate. A live person answers, day or night.
Key Takeaways for Westlake Homeowners
- Your home likely already has impact-rated windows. The real question is whether the glass unit inside them is any good, because builder-grade insulated glass in Westlake often fogged or lost argon within 5-7 years.
- Insert window replacement runs roughly $400-$900 per window in Westlake, depending on glass package and sash condition. Full frame replacement is typically $900-$1,800 per opening.
- Replacing the glass only - not the whole window - usually preserves your builder warranty, and it keeps your HOA out of the conversation because the exterior appearance doesn’t change.
- TruePane registers both manufacturer warranty layers in writing before the truck leaves your driveway. That’s The Keystone Standard, and it applies to every Westlake job.
Why TruePane Windows & Doors Is Westlake’s Preferred Window Replacement Company
TruePane has been serving Palm Beach County homeowners since 2008, and Westlake’s newer neighborhoods are a significant part of our current work. Dale Kessler founded the company in 2008 on a simple rule: if the pane is not true, the job is not done. That rule governs every insert, every full frame swap, every sliding door roller we touch in Westlake.
We carry OEM replacement parts for the builder-grade Minto window packages found throughout Westlake. That means we don’t order parts after we diagnose the problem; we diagnose and fix on the same trip in most cases. Homeowners in the Meadows, the Hammocks at Westlake, and the Cresswind 55-plus community tell us the same thing: the first company they called couldn’t get the part for a week; we had it on the truck. That’s what stocking local parts does.
Every technician who works in Westlake is background-checked, uniformed, and trained to treat your home the way they’d treat their own mother’s house. We measure every opening twice, we quote manufacturer lines side by side on paper, and we register both warranty layers before the truck leaves the driveway. A live person answers every call 24/7, backed by a company that plans to be here in thirty years, not three.
Our Window Replacement Services in Westlake
Insert Window Replacement
This is the most common job we do in Westlake, and it’s the one that saves homeowners the most money. Because Minto built with standardized rough openings, we can order or stock exact-fit replacement sashes and insulated glass units without touching your stucco, trim, or interior drywall. A typical insert replacement in Westlake runs $400-$900 per window, completed in one visit. We handle the HOA paperwork side too when needed, though most insert work in Westlake flies under architectural review because the exterior profile doesn’t change.

Energy-Efficient Upgrade
The smartest first upgrade in a Minto-built Westlake home is replacing the builder-grade clear insulated glass with energy-efficient windows using a low-E/argon unit. The frame stays, the HOA never sees a change, and your U-factor and SHGC drop noticeably, which matters on Westlake’s open, sun-baked lots. We quote glass packages from PGT, CGI, and ES Windows side by side on paper, so you see exactly what you’re buying and what it costs. Most Westlake energy upgrades run $300-$700 per opening for glass replacement alone, depending on the low-E coating spec and whether you want argon or krypton fill.

Full Frame Replacement
When a window is truly beyond saving, a rotted or compromised jamb, a failed structural seal, or a homeowner who wants a different style, we pull the entire unit and set a new one in a properly flashed, properly shimmed opening. Full frame replacement in Westlake runs $900-$1,800 per window for standard impact-rated replacements in the sizes Minto used. We pull permits when required, we pass inspection, and the job isn’t done until the pane is true and the trim is clean. Dale’s rule, every time.

Storm Window Replacement
Westlake sits in the Wind-Borne Debris Region, and the flat, open terrain means wind hits these windows harder than it hits most Palm Beach County homes. Storm-damaged impact units, cracked laminated glass, bowed frames, and blown-out door thresholds are common after a named storm passes through. We replace storm windows with code-compliant impact-rated products, and we document everything for your insurance claim. A typical storm window replacement in Westlake runs $700-$1,400 per opening, depending on size and whether the frame can be saved.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Westlake
We’re an authorized installer for more than a dozen manufacturer lines, and in Westlake we work most often with PGT, CGI, and ES Windows. Because Minto’s builder packages pull heavily from these manufacturers, we stock the OEM gaskets, rollers, and hardware that Westlake homes actually use. That means faster service, correct parts the first time, and no one improvising with a generic substitute that doesn’t seal right. If you’re not sure what brand is in your home, call us, we’ll identify it from a photo or a quick visit.
Common Window Replacement Problems We See in Westlake Homes
- Fogged or hazy glass on homes built 5-7 years ago. Builder-grade insulated glass units lose their argon fill and develop seal failure early, especially in Westlake where windows get relentless full-sun UV loading with no mature tree canopy for shade. The glass needs replacing, not the whole window.
- Sill gasket compression set from constant sun exposure. The gasket under the sash compresses and hardens in Westlake’s heat, creating air leaks and water intrusion around otherwise impact-rated frames. We replace the gasket and reseat the sash without disturbing the frame or the stucco.
- Sliding glass doors that bind or jump off track. Open, flat terrain means wind loads push hard against multi-panel doors, wearing roller bearings faster than in established shaded neighborhoods. The same roller wear pattern shows up home after home in the same age cohort across Westlake.
- Discontinued Minto-spec components. When Minto changed suppliers mid-development, certain window and door hardware became hard to find. We stock or can source the exact discontinued part faster than most, because we’ve been tracking these substitutions across Westlake’s subdivisons since the first homes closed.
Why Westlake’s Window Market Is Different From Every Neighboring City
Westlake is one of Florida’s newest incorporated cities, chartered in 2016 and developed almost entirely by Minto Communities from 2017 onward. That means virtually every home here was built with code-mandated impact-resistant windows and doors installed as original equipment. There is no legacy single-pane aluminum retrofit market the way there is in Wellington or Palm Springs. Instead, Westlake’s window work is about three things: upgrading builder-grade insulated glass to higher-performance low-E/argon packages, resolving warranty defects on units less than 8 years old, and repairing storm damage on homes that have only experienced their first few hurricane seasons.
Because Minto used a consistent builder-grade window package across Westlake’s construction phases, the same sill gasket failure and sliding-glass-door roller wear pattern appears home after home in the same age cohort. Contractors who stock that exact OEM replacement part can run efficient multi-stop service days within a single subdivision. We do exactly that. In the Meadows of Westlake, our crew replaced eleven sliding & patio doors rollers and matching sill gaskets across four adjacent Minto-spec homes in one service day. Same model, same wear pattern, same OEM part. On one of those homes, we also upgraded the builder-grade double-hung glazing from standard clear insulated glass to a low-E/argon unit, cutting afternoon solar gain without changing the sash or jamb. The HOA architectural committee signed off the same week, because from the street, nothing looked different.
How Westlake’s Climate and Setting Affect Your Windows
Western Palm Beach County is flat and open, and Westlake sits squarely in the Wind-Borne Debris Region. Once a storm gets past the coastal urban core, there’s little to slow the wind down before it reaches your windows, doors, and any glass railing systems. That’s a meaningful exposure factor for door thresholds, frame seals, and anything with a gasket or bearing. It’s also why we check and, when needed, replace sill gaskets and door rollers as part of any Westlake window replacement estimate.
Then there’s the sun. Westlake has almost no mature tree canopy. These are recently cleared, formerly agricultural lots, and your windows take uninterrupted full-sun UV loading year-round. That speeds up glazing seal degradation and hardware oxidation faster than in established, shaded neighborhoods in Wellington or Loxahatchee Groves. If your windows are 5-7 years old and starting to fog, that’s not bad luck. That’s Westlake’s environment doing what it does to builder-grade insulated glass.
Pricing for Window Replacement in Westlake, FL
Here are honest ranges for the work we actually do in Westlake. Insert window replacement with a standard low-E/argon insulated glass unit: $400-$900 per window. Full frame replacement with impact-rated units: $900-$1,800 per opening. Storm window replacement: $700-$1,400 per window. Energy-efficient glass-only upgrades: $300-$700 per opening. Sliding door roller and gasket repair: $150-$400 per door, depending on how many panels and what parts are needed.
What changes the price: window size, glass package you choose (clear vs. low-E vs. low-E with argon vs. laminated impact glass), frame condition, and whether the HOA requires any architectural review. We give you a written, line-item quote before we start, and that’s the price. No change orders on our end. Call (561) 349-4826 to schedule your free estimate. Estimates are free, and so is the advice about whether your builder warranty covers the work or not.
We Also Serve Cities Near Westlake
Our Westlake crews regularly work in Westlake and the surrounding areas, including Wellington, Belle Glade, Loxahatchee Groves, and Palm Springs. If you’re in one of those communities and need Window Replacement or hardware repair, call us. The same live person answers, the same crew shows up, and the same warranty registration process applies.
Serving Westlake, FL - Our Local Coverage Area
We’re based in the Westlake area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Westlake
Because the impact-rated frame may be fine, but the builder-grade insulated glass unit inside it often is not. Westlake’s full-sun exposure and flat, open setting cause insulated glass seals to fail within 5-7 years, producing interior fogging and lost argon fill. Replacing the glass unit with a higher-performance low-E/argon option, while keeping the impact-rated frame, improves energy efficiency and clarity without voiding the builder warranty or triggering HOA review. Call (561) 349-4826 and we’ll tell you if the glass or the whole unit is the right call.
No, not when it’s done correctly and documented. Replacing only the insulated glass unit, leaving the original frame, sash, and installation intact, generally preserves your builder warranty on the window assembly. We document the work, register the new manufacturer warranty in writing, and give you a copy before we leave. If you’re inside your builder warranty period, call (561) 349-4826 first, we’ll tell you what’s covered and what isn’t, free.
Fogging means the insulated glass unit’s seal has failed, letting moisture in and letting argon (if it was ever there) escape. Westlake’s near-total lack of tree canopy means windows bake in direct UV all day, every day, which accelerates seal degradation far faster than in shaded neighborhoods. The fix is replacing the glass unit, not the whole window, and it’s a job we do weekly in Westlake. Call (561) 349-4826 for a glass-only quote, it’s usually less than half the cost of a full replacement.
Almost certainly not. Westlake’s HOAs, particularly in the newer Minto-built sections, enforce exterior appearance standards, including window frame color. If you want a different color, you’ll need to submit an architectural review application first, and many subdivisions require all street-facing windows to match. We can help you prepare the application and, once approved, we’ll do the work. Call (561) 349-4826 and we’ll walk you through what your specific community requires.
The fastest way is to call someone who stocks the exact Minto-spec rollers and sill gaskets your door uses, which is us. Most sticky or binding sliding doors in Westlake have worn roller bearings or a compressed sill gasket from UV exposure and wind loading. We replace the worn parts, adjust the door, and it glides again, usually in under two hours. Call (561) 349-4826 and we’ll get it handled.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Westlake and the surrounding Palm Beach County communities.
Call (561) 349-4826 to schedule your free window replacement estimate in Westlake. A live person answers, 24/7. We measure twice, quote on paper, register both warranty layers in writing, and stand behind the work for 90 days with the Done Right Promise. If the pane is not true, the job is not done.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After