Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Ocean Ridge
Window replacement in Ocean Ridge runs $850-$2,400 per opening for most insert and full-frame jobs, with impact-rated coastal units landing between $1,400 and $3,800 depending on size and frame material. If you’re in a 1960s ranch on Old Ocean Boulevard or a newer custom home off Spanish River Drive, our Window Replacement team measures every opening twice, quotes manufacturer lines side by side on paper, and registers both warranty layers before the truck leaves your driveway. Call (561) 349-4826 and a live person answers, not a voicemail tree.
Key Takeaways
- Ocean Ridge sits on a barrier island with salt air hitting from both the Atlantic and the Intracoastal, so window frames need anodized or PVDF-coated finishes and stainless hardware or they pit within three to five years.
- Palm Beach County requires impact-rated glazing rated to 160 mph wind-load on this shoreline, and the permit and inspection paperwork is what actually unlocks the insurance wind-mitigation discount.
- Older jalousie rough openings almost always need full-frame tear-out; a cheap insert job skips that step and leaks under wind-driven rain.
- TruePane has served South Florida communities since 2008 through Dale Kessler’s second-generation craft tradition, and every job carries the Done Right Promise in writing.
Why TruePane Windows & Doors Is Ocean Ridge’s Preferred Window Replacement Company
We’ve worked on homes along Tropical Drive, A1A, and the Intracoastal side streets long enough to know that Ocean Ridge properties do not behave like mainland houses. A window that holds up fine in Boynton Beach will show frame pitting and frozen multi-point door locks here within a few seasons. That’s why we specify PVDF-coated aluminum or impact-rated vinyl and stainless hardware as the baseline on any ocean or waterway exposure, not as an upgrade. Dale Kessler founded this company in 2008 on a rule that’s been on the whiteboard since day one: if the pane is not true, the job is not done. We’ve been serving local communities since 2008, and we plan to be answering the phone in thirty more.
Every technician who walks through your door in Ocean Ridge is background-checked and uniformed. Every quote is line-item on paper so you see the exact window, frame finish, and hardware grade you’re buying. If something is not right after install, the Done Right Promise means we make it right, no paperwork fight. This page is the resource we wish other contractors handed out before quoting on the barrier island: what the code actually requires, which products carry the ratings, and what documentation you need for your insurer.
Our Window Replacement Services in Ocean Ridge
Full Frame Replacement
Most homes in Ocean Ridge built between the 1950s and 1970s still have original aluminum jalousie windows or thin-framed sliding glass doors. Those rough openings were sized for non-impact frames, and an impact-rated unit with a thicker jamb profile will not fit properly without a full tear-out and rebuild. We remove the old frame down to the studs, correct any rot or settling, flash with tape and sill pan, and set the new unit square and true. On Older homes along neighborhoods like the streets off Woolbright Road, full-frame replacement is often the difference between a window that performs for thirty years and one that leaks in the first hard storm.
Insert Window Replacement
If the existing frame is still structurally sound and square, an insert replacement keeps the interior trim intact and drops a new energy-efficient or impact-rated sash into the original opening. In Ocean Ridge, we only recommend inserts when the existing frame is aluminum in good condition or a newer extruded vinyl that is not chalked or pitted from salt. This is the faster job and typically the lower-cost one. We’ll tell you plainly if an insert will not meet the wind-load requirement for your side of the island and a full-frame replacement is what the house actually needs.
Storm Window Replacement
Some Ocean Ridge homeowners want a second layer of protection without replacing the primary window, and a storm window does that. But on a barrier island, the storm unit itself has to be specified and fastened for 160 mph wind pressure. We specify storm windows with marine-grade hardware and stainless fasteners, never the big-box aluminum that corrodes within a couple of seasons of salt spray. These are often the right call for a protected courtyard window or a north-facing laundry room where full impact glazing is not required by code but you still want the buffer.
Energy-Efficient Upgrade
An energy-efficient upgrade in Ocean Ridge usually means an impact-rated unit with low-e glass, and that is a two-for-one on this island: the low-e coating cuts solar heat gain off the Atlantic sun, and the impact rating satisfies the county wind-load requirement. We quote Andersen, Pella, Marvin, and other manufacturer lines side by side on paper so you see the difference in U-factor, SHGC, and cost per opening. The right low-e glass here depends on the orientation. East-facing windows on the ocean side need a lower SHGC to cut the morning heat; Intracoastal-west windows still take reflected heat off the water and need the same. Our team calculates that per opening, not per house.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Ocean Ridge
TruePane is an authorized installer for more than a dozen manufacturer lines, including, PGT, CGI, and ES Windows. In Ocean Ridge, the most common calls we run are on PGT and CGI impact lines because those manufacturers carry the high-velocity hurricane zone ratings the county expects on this shoreline. We also work with ES Windows for custom waterfront estates where the homeowner wants a specific frame finish or sightline. Because we install these lines repeatedly on Ocean Ridge jobs, we know the lead times and the hardware quirks. We register both warranty layers in writing before we leave, then hand you the paperwork so if anything fails down the road, the manufacturer and TruePane both stand behind it. That is The Keystone Standard, and it goes on every quote.
Common Window Replacement Problems We See in Ocean Ridge Homes
- Corroded aluminum frames and pitted finishes within five years. On Intracoastal-side windows, standard architectural aluminum without an anodized or PVDF coating starts pitting from salt-laden moisture within three to five years. We see this on nearly every older home we quote along the water, and the fix is not a patch, it is a specification change on the next window replacement.
- Jalousie windows that will not stay open or close fully. Original 1960s jalousie mechanisms seize from salt and corrosion. The glass might be fine, but the cranks and links are done. These homes almost always need full-frame tear-out because impact-rated casements or sliders have much thicker frames than the old jalousie channels.
- Rough openings reused for impact glass a previous contractor installed. We see this often enough: someone put an impact insert into a jalousie rough opening without rebuilding it, and the first wind-driven rain found the gap where the flashing tape could not fit. That leaks behind the wall, and the fix is to pull the window and redo the rough opening properly.
- Skipped wind-load inspection. Palm Beach County requires a wind-load inspection on permitted window replacements in this coastal zone. Without that documented 160 mph rating on file, the homeowner cannot claim the wind-mitigation discount or prove compliance to an insurer after a claim. We pull the permit and walk the inspection, then hand you the certificate.
Pricing for Window Replacement in Ocean Ridge, FL
What you pay in Ocean Ridge depends on three things: frame material, glass package, and whether the rough opening can stay or needs a full tear-out. A standard vinyl insert with a plain low-e double pane runs $850-$1,400 per opening on a typical 1960s ranch. A mid-range impact-rated vinyl or aluminum window on a single story is usually $1,500-$2,600 per opening, installed and inspected. Full-frame replacement on an older jalousie opening with an impact-rated PGT or Marvin unit, including tear-out, flashing, sill pan, and stucco or trim repair, starts around $2,200 and can reach $3,800 per opening on large custom sizes or second-story ocean-facing windows. Custom lines like ES Windows or ViewLux on a new waterfront estate run higher, but those are case-by-case and quoted line by line. Call (561) 349-4826 and we will give you a written quote with no surprise line items. There is also a permanent 5% discount for seniors and veterans, and a free written repair estimate.
We Also Serve Cities Near Ocean Ridge
Our crews work Window Replacement in Ocean Ridge and the surrounding communities regularly. If you’re in Wellington, Belle Glade, Loxahatchee Groves, or Westlake, the same TruePane team handles the job, and the same Done Right Promise applies. Each of those towns has its own code quirks and housing stock, and we quote them accordingly. Call the same number: (561) 349-4826.
Serving Ocean Ridge, FL - Our Local Coverage Area
We’re based in the Ocean Ridge area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Ocean Ridge
In Ocean Ridge’s shoreline exposure zone, the county requires impact-rated glazing designed for 160 mph wind-load. That means the window assembly, not just the glass, is tested and labeled for the full design pressure. A compliant quote includes the manufacturer’s product approval number, the permit, and a final inspection with the wind-load certificate documented. We handle all three, and you get the certificate in writing. Call (561) 349-4826 for an exact quote, estimates are free.
Both sides degrade fast, but in different ways. The Atlantic side takes direct salt spray and wind-driven sand, while the Intracoastal side takes constant humidity and reflected salt-laden moisture from the water. The hardware and frame finish on the Intracoastal side often fails just as quickly because the exposure is every day, not just during storms. That is why we specify stainless hardware and anodized or PVDF-coated finishes on both exposures instead of only on the ocean front.
No. The premium reduction comes from a wind-mitigation inspection and the documented wind-load certification on file, not from the windows existing. You need the permit record, the product approval, and the passed inspection. We deliver all of that after every impact-rated window replacement in Ocean Ridge, so you can file for the discount directly. Call (561) 349-4826 and we will walk you through the paperwork.
Look for white chalk on the frame, pitting on the aluminum, and hardware that sticks or will not throw the multi-point lock. If the sash will not stay open or closed, the mechanism is already corroding internally. On Tropical Drive, we tore out a 1968 aluminum jalousie system with corroded sashes that would not stay open in a breeze, rebuilt the rough opening, and installed a Marvin impact-rated casement with fusion-welded frame and stainless hardware. After flashing and sill pan, that home now keeps a wind-load certificate in its hurricane file. If your frames are chalking or locking hardware is seizing, call us before the next storm season.
You can, but you should not. Jalousie rough openings were sized for thin, non-impact frames, and an impact-rated unit with a thicker jamb profile needs more depth for flashing tape, sill pan, and proper anchoring. A contractor who skips the full-frame tear-out to save money leaves you with a window that leaks under wind-driven rain and may not pass the county wind-load inspection. We pull the permit, rebuild the opening, and pass the inspection the first time. If you want certainty, call (561) 349-4826 for a free estimate and we will tell you exactly what your house needs.
Get Your Free Window Replacement Estimate in Ocean Ridge
Our crews serve Ocean Ridge weekly and know what this island demands from a window. If you are ready for a straight answer, a written quote, and work that stands behind itself, call (561) 349-4826. A live person answers, 24 hours a day, 7 days a week. We’ll come out, measure every opening twice, and show you manufacturer lines side by side on paper. No pressure, no fine-print games. Just a square deal and work done right. That is the TruePane standard.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Ocean Ridge and surrounding communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.